The Salli Job is a task stool designed with the needs of the manufacturing or service sectors in mind. As with other Salli models, the design of the seat is intended to promote a more upright posture and correct positioning of the spine by tilting the pelvis forward. The shape of the seat follows the basic concept of the Salli Split Saddle Seats but in a single anatomically-moulded piece. The groove which provides separation between the two halves of the seat provides pressure relief for the tailbone and genitals and also aids in cooling by facilitating better air flow. The seat itself is a 'self-skinned' polyurethane foam which enables it to easily be wiped down or washed with a wide variety of cleaning or disinfection agents. Height adjustment of the gas spring lift is accomplished through a standard hand-controlled height adjustment lever. The Salli Job comes with a basic black nylon 5-star base and a black Medium Cylinder which is designed to accommodate users from 5'1" - 6'1". Low (Short - 4' - 5'2") and Tall (5'8" and over) cylinders are also available.

Important:The moulded polyurethane seat on the Salli Job is significantly firmer than other upholstered Salli Saddle Chairs. Due to the overall firmness most users may find that this seat is better suited to intermittent or short-term use.

Some ideal uses for this chair would be: Assembly Lines, Hair Dressers, Cashier Stations, Factory Floors, and Lab settings. The durability of the seat and its ability to be easily cleaned are key features which make it especially suitable to these applications.

Note: If the split saddle concept appeals but you are looking for a more active sitting experience the Salli Sway, Swing and SwingFit models may be of interest as each of these offer an 'active' tilt and free-moving seat design.

The LOTAH Sit-Stand Comfort Seat from Mey Chair Systems is well-suited to users who need to work as close as possible to the work surface of an elevated workstation, particularly those built on top of base cabinets or shelves. The LOTAH features a large plush saddle designed to be straddled, rather than leaned against. While keeping the torso in an ergonomically desirable upright orientation, the straddle posture positions the heels behind the bend of the knees, rather than extended forward of the knees as they would be on a leaning stool. (See the Tulean Sit-Stand Comfort Leaning Stool, also by Mey Chair Systems, for an illustration of this latter position.) This posture allows the user to move in much closer to flat-fronted work surfaces than might otherwise be possible. As a result, the LOTAH Sit-Stand Comfort Seat helps to reduce the risk of overreach injuries to the muscles of the shoulders and back, and the risk of injury to the muscles of the sides and mid-section caused by sitting sideways along the base of the workstation and twisting at the waist to get close enough to its surface. The LOTAH Sit-Stand Comfort Seat also helps to reduce the load borne by the feet and legs for those who work at elevated workstations by transferring the majority of the user's weight to the seat. As a result the user experiences less overall fatigue and a greater ability to maintain focus and concentration.

Built on a heavy tubular steel base with a gas spring that enables a height adjustment range of 24.8" to 31.5", and with a seat that has 15° of tilt range and 3" of cushioning, the LOTAH Sit-Stand Comfort Seat offers individualized comfort and long-term durability.

The EQUESTRY Sit-Stand Seat from Mey Chair Systems positions the user in an upright stance that is known to encourage upper body movement and deeper breathing. Together these have the potential to improve overall circulation and increase the alertness of the user. The upright stance also naturally realigns the spine and reduces the potential for lower back pain which is often associated with extended sitting. In addition it provides users with a noticeably extended reach or "Comfort Zone" which reduces the risk of over-reaching.

The Sitting Saddle Stool comes equipped with casters which lock when weight is lowered onto them, meaning that the chair does not move once the user is seated. This makes this an ideal chair for those performing tasks which require fine control but a full range of movement. The full 360° of free rotation enables users to easily align to equipment or reach other work areas as needed.

The gas lift provides a seat height anywhere between 22" to 27.6" and the seat also has the option of forward tilt up to 15°. This tilted seat position rotates the pelvis further forward, encouraging a more natural alignment of the back. Some users may also find this additional tilt more comfortable. Since the casters lock when weight is put on the chair, shorter users may be able to employ the tilting option in order to use this stool as a leaning solution when they need to move between locations and don't want to go into a fully seated stance.

The EQUESTRY Sit-Stand Seat features easily cleaned black imitation leather upholstery and a chromium-plated steel base for durability.

The HNDSFREE Sit-Stand Stool from Mey Chair Systems is ideal for use in sterile environments, especially those in which safety and security are important. The Foot Release Plate enables quick, easy, hands-free adjustment of the seat height from any point around the chair.

In addition, the straddle position ensures that the feet are well-planted for exceptional stability and upper body control, providing users with superior upper torso mobility and range of motion. The full 360° of free rotation enables users to easily align to patients and equipment or to reach other work areas as needed. The seat can be tilted forward up to 15°, and the gas lift cylinder allows the height of the seat to be adjusted from 24.8" to 30.3".

Note: Sitting on a Saddle Stool elevates a user higher than a standard seat. Saddle stools are therefore not generally recommended for use at a standard office desk. Please call one of our Product Specialists to discuss your intended use. We will be happy to assist you in selecting the best solution for your needs.

Equipped with special braking castors, the HNDSFREE Sit-Stand Stool rolls freely when the user is seated but stops moving as soon as the user stands up. This innovative feature enhances the overall safety of the work environment, and helps all present maintain their focus on the task at hand.

Both models of the HNDSFREE Sit-Stand Stool feature easily cleaned Black Imitation Leather upholstery and a chromium-plated steel base for durability.

Model 11209 offers all of the above features, with the addition of a firm, height and angle adjustable back support. (Note: The back on the 11209 has a 2.5" deep curvature in the middle, is 14" wide, and has firm edges. Some users with broader frames may find the back on this model too narrow and deep for a comfortable fit.)

The NOSTND Sit-Stand Comfort Seat from Mey Chair Systems is designed to help users with larger builds work as close as possible to a raised workstation, particularly those built on top of base cabinets or shelves. Unlike the seats on a leaning seat or traditional stool, the large plush saddle on the NOSTND is designed to be straddled. Seated posture on the NOSTND is more upright, with the heels positioned behind the bend of the knees, rather than extended forward of the knees as they would be in a leaning position. (See the Tulean Sit-Stand Comfort Leaning Stool, also by Mey Chair Systems, for an illustration of this latter position.) This posture allows the user to move in much closer to flat-fronted work surfaces than might otherwise be possible. As a result, the NOSTND Sit-Stand Comfort Seat helps to reduce the risk of overreach injuries to the muscles of the shoulders and back, and the risk of injury to the muscles of the sides and mid-section caused by sitting sideways along the base of the workstation and twisting at the waist to get close enough to its surface. By supporting the majority of the user's weight on the seat, the NOSTND also helps to reduce the load generally borne by the feet and legs. Overall fatigue, and the risk of strain on the joints and tissues of the lower limbs can be greatly reduced.

Both the saddle style seat and the large back feature 3" cushioning; and both are height adjustable. The height of the seat can be adjusted between 23.25 and 28.75". The height adjustment range of the back is determined by the seat position. A handle and large rollers on the back glides enable the NOSTND to be easily moved as required. The NOSTND dual rectangular steel tube base is rated to support up to 440 pounds.

Larger users looking for a more traditional style of seat may be interested in considering the RSTMOR Sit-Stand Chair, also from Mey Chair Systems.

The EQUSIT Sit-Stand Saddle Seat from Mey Chair Systems features a heavily padded, tilting, bicycle style seat mounted to an elevated heavy duty steel frame. A gas spring provides a cushioned seat range from 27.75" to 36.6", sufficient to provide suitable seating heights for the majority of users. The wide back features 2" thick cushioning and has independent height and angle adjustments.

Two footrest options are available. Model 83015 features a large 22.8" diameter heavy steel footring that provides a convenient 360° fixed footrest a minimum of 9" above the floor. Model 83016 features a folding 120° footrest with angle adjustment. For safety, the steel footplate has an aggressively treaded surface. Both footrests can be secured at greater heights if necessary.

Both models have oversized 27" diameter Chromed Steel bases equipped with glides. The large base and glides ensure stability when mounting and dismounting from the saddle. If desired, the base on Model 83016 can be folded flat for storage.

The Salli SwingFit is the only freely moving adjustable split saddle seat chair offered on the market today. It combines the concepts of upright stance and movement and provides many of the benefits currently being attributed to Standing Workstations without the need to stand throughout the day.

Note: If the concept of movement and upright stance have appeal but the cost of the Swingfit is prohibitive there is the option of considering the Swing or its economical cousin, the Salli Sway. These models offer the same movement and upright stance benefits of the SwingFit without the adjustability of the split saddle.

The unique rocking mechanism enables the seat to freely and continuously tilt or 'rock' on the left-right and front-back axis (and all angles in combination) in response to the movements of the user without any adjustments to the chair. This stimulates muscles in the abdominal and pelvic area, realizing benefits for the user similar to those which can be obtained through use of an exercise ball. It also adds to the mobility and metabolism of the lower back while still getting appropriate support from the split saddle seat design and maintaining the natural curvature of the spine.

In addition to the Swing mechanism the SwingFit offers the user the option of adjusting the width and angle of splay between the two halves of the saddle seat. This enables each person to customize chair to their specific body requirements. Although not necessary for many users it does offer extra customization that other models with the Swing mechanism do not.

Height adjustment of the gas spring lift is accomplished through a standard hand-controlled height adjustment lever. Available lift sizes and the corresponding user heights they accommodate are as follows: Short (4'0" to 5'2"), Mid (5'1" to 6'1") and Tall (5'8" to 6'5"). The SwingSeat can be purchased upholstered in either genuine leather or polyurethane faux leather, each available in a range of colours.The 5-point star base and lift are in an attractive chrome finish. The total weight of the chair is 10.9 kg (24 lb)

The MVMNT Folding Sit-Stand Saddle Chair from Mey Chair Systems is a non-swiveling, foldable saddle seat designed for smaller or average sized users working at standard or elevated workstations.

With its saddle-style seat, and a base-mounted footrest that keeps the toes approximately in line with the knees (rather than extended forward of the knees as they would be on a leaning stool), the MVMNT allows users to sit as close as possible to a work surface built on top of base cabinets or shelves. The MVMNT keeps the torso in an ergonomically desirable upright position, while at the same time providing stability and reducing the need to bend forward from the waist. This posture is especially beneficial when fine control is needed or when greater effort must be exerted. The small back rest offers temporary support for users who like to lean back occasionally.

The height of the seat can be adjusted from 20.9" high, to 30.7" high. The height of the back rest can be adjusted independently to allow users to position support where it is needed. The seat and back rest are both padded for comfort and upholstered in black imitation leather for easy cleaning. The MVMNT features a foot-bar to provide a secure base of support when the chair is elevated. The height of the foot-bar can be adjusted independently of the seat height and can easily be folded out of the way when not required or for storage and transport.

The MVMNT features simple folding hinges, and easy handwheel adjustment of seat, back and footrest heights. The MVMNT is built on a sturdy, rectangular tube steel base. Rated to 264 lbs, but weighing only 18.7 lbs in total, the Chair can be easily transported between venues or job sites.

Straddling the PYRCH Sit-Stand Saddle Stool from Mey Chair Systems allows the user to adopt an upright stance that encourages more upper body activity, better and deeper breathing, and improved overall blood flow. The user becomes more alert and can enjoy greater reach and freedom of movement. The upright position also makes it easy to return to a fully standing position.

Seated on the PYRCH Saddle Stool, the user also adopts a wider stance than is possible on a leaning stool or on standard chair. The saddle stool can be positioned at any height from 26" to 35.8". It can also be tilted forward up to 15° and provides a full 360° of free rotation. This capacity for full rotation makes the PYRCH a practical solution for users who need to swivel between different work surfaces from a fixed position. When the seat pan is tilted the PYRCH can also provide a degree of leaning capability. The robust black tubular steel base provides strength and stability, with strong nylon glides that ensure secure positioning.

The HYSIIT Sit-Stand Saddle Stool from Mey Chair Systems creates an upright posture that encourages upper body movement, better and deeper breathing, and improved overall circulation. This posture also enables greater reach and range of movement in the upper body, and makes it easy to return to a fully standing position.

The saddle stool design also creates a wider stance for the user, providing a secure seated position that offers relief to the joints of the legs and feet. The saddle stool tilts forward up to 15°, rotating the pelvis forward and resulting in a more natural and comfortable alignment of the back. The full 360° of free rotation enables users to swivel easily between work surfaces without the need to twist and turn at the waist. The stool can be positioned at any height from 26" to 35.8", and the easily adjusted gas cylinder creates a cushioning effect that gives slightly when the user sits down, reducing the impact on the lower back.

Self-braking castors permit the stool to roll freely but will brake when the user stands up. This practical feature ensures that the seat remains in the same position the user left it. Long-wearing woven fabric over foam padding provides a breathable seat for better comfort.