The One Touch Freestand from ErgoTech Group is an freestanding electric motorized desk add-on unit for creating a sit-stand workspace using an existing desk. The Freestand has two worksurface areas: one upper surface for placing documents or other desk objects and one lower surface for keyboard and mouse. Single and Dual monitor mounting kits can then be added to mount monitors using a VESA plate mechanism.

The Freestand holds up to two 27" monitors at once (with a combined weight capacity up to 100 lbs total weight on both surfaces) and has a height adjustable range of 20". This Freestand unit comes with a front desk clamp mount so that the keyboard tray can be securely lowered below desk height for sitting. The front clamp makes the whole unit more secure on the desk.

The One Touch Freestand comes with a base unit (including electric motor, a center monitor mounting pole, upper 13"x 28" and lower surface 10" x 28" worksurfaces) and a front desk clamp mount. Monitor Mounting Kits are purchased in addition to the base unit and desk clamp. Which kit to choose depends on how many monitors are to be deployed on the unit.

The Thermodesk ELLURE Table Tops from iMovr are constructed with 1 1/8" thick high-density MDF cores, machined with softly rounded edges and corners. The finish is 3D vacuum laminated at high heat with the resulting laminate finish fully wrapped around the top, the sides, and the grommet hole interiors in one complete and seamless film. This process ensures a fully sealed, non-porous surface that protects against damage caused by humidity and exposure to liquids. Multiple layers of finish provide additional resistance against abrasion and damage from many common cleaning and disinfectant products.

A wide palette of colours is available, including Hayward Cherry, Clove Mahogany, Light Maple and Urban Walnut. This attention to the details of construction and finish ensure that the commercial grade Thermodesk ELLURE Table Tops will provide the right tone in any office environment--from entry level to the most senior executive.

The table tops are pre-drilled to fit the iMovr RELEVATE frame (formerly known as the Ellure) and are fitted with threaded metal inserts that ensure quick and easy installation with a single Phillips screwdriver. The metal inserts ensure a well-secured top as well as the ability to remove and replace tops without wear on the mounting points. (Note: Thermodesk ELLURE tops can be installed on other sit-stand desk frames but the threaded inserts may not be useable in those applications.)

The ThermoDesk Uptown Select Table Tops from iMovr are constructed with 1 1/8" thick high-density MDF cores, machined with softly rounded edges and corners. The finish is 3D vacuum laminated at high heat with the resulting laminate finish fully wrapped around the top, the sides, and the grommet hole interiors in one complete and seamless film. This process ensures a fully sealed, non-porous surface that protects against damage caused by humidity and exposure to liquids. Multiple layers of finish provide additional resistance against abrasion and damage from many common cleaning and disinfectant products. A wide palette of colours is available, including Hayward Cherry, Clove Mahogany, Light Maple and Urban Walnut. This attention to the details of construction and finish ensure that the Uptown Select Table Tops will compliment any office.

Uptown Table Tops feature dual 3" grommet holes and are equipped with threaded steel inserts for effortless installation on the iMovr UpStage 30 frames using a single Phillips screwdriver. The 47" and 59" tops will fit the UpStage 30 Narrow frame while the 71" and 83" tops are equipped to match the UpStage 30 Wide frames. The metal inserts ensure a well-secured top as well as the ability to remove and replace tops without wear on the mounting points. (Note: ThermoDesk Uptown Select tops can be installed on other sit-stand desk frames but the threaded inserts may not be useable in those applications.)

The Dual Kangaroo is an adjustable height desk which converts any ordinary desk into a sit-stand desk. It is free-standing (no clamping required) and easily moved to any position on the desk. The main keyboard platform adjusts up or down with the assistance of a gas cylinder (or lift), making quick adjustments throughout the day easy and effortless. This platform is generous compared to most keyboard trays at 28" wide and 24" deep and can be adjusted up to 16.5" above the desk. With the "stopping bolt" feature, the workstation platform can be elevated to a preset maximum desired height every time. All Kangaroo models also include a stabilization leg to practically eliminate worksurface vibration.

Two independently adjustable shelf units are also provided with the Dual Kangaroo to support either two monitors with their stands attached or two laptops (or a combination of monitor and laptop). This shelf unit has a 6.5" range of adjustment relative to the main keyboard platform. It also has its own gas cylinder mechanism and tightening knob (or "monitor brake").

The Dual Kangaroo is recommended for monitors or laptops up to 10 lbs each (with stands attached). For heavier monitors, customized units can be special ordered upon request.

Available colour options include Black, Cherry, and Maple. Additional accessories to extend the worksurface are also available.

Le Dual Kangaroo est un bureau ajustable en hauteur qui transforme n`importe quel bureau ordinaire en bureau assis-debout. Il est sur pieds (un serrage n`est pas requis) et facilement déplacé à n`importe quelle position sur le bureau. La plate-forme principale de clavier est ajustable avec l`aide d`un verin à gaz (gas cylinder or lift). Cette fonctionnalité permet aux utilisateurs de faire des ajustements en haut ou en bas rapidement et facilement. Cette plate-forme est plus gros que les tablettes standard de 28 po en largeur et 24 po de profondeur, et peut être ajustée jusqu`à 16.5 po au-dessus du bureau. Avec le fonction d`un boulon d`arrêt, l`utilisateur peut augmenter la plate-forme d`une hauteur préférée prédéfinie chaque fois. Toutes les modèles de Kangaroo ont aussi un stabilisateur pour réduire la vibration de la surface de travail.

Deux étagères ajustables indépendamment sont aussi fournit avec le Dual Kangaroo pour supporter l`un l`autre deux moniteurs avec leurs bases attachées, ou deux ordinateurs portables (ou une combinaison d`un moniteur et un ordinateur portable). Ce module en étagère a une gamme d`ajustement de 6.5 po par rapport à la plate-forme principale de clavier. Il a aussi son propre vérin à gaz (gas cylinder mechanism) aussi qu`un bouton de serrage (ou "un frein de moniteur").

Le Dual Kangaroo est recommandé pour les moniteurs ou ordinateurs portables qui pèsent jusqu`à 10 livres chacun (avec les bases attachées). Pour les moniteurs plus lourdent, des modèles personnalisées peuvent être commandés sur demande.

Disponibles en noir, rouge cerise, et en érable. Accessoires supplémentaires pour étendre la surface de travail sont aussi disponibles.

The Tablet/Document Holder for WorkFit-S from Ergotron is a simple accessory that adds functionality to the basic WorkFit-S models (ie. those without the upper worksurface). The holder is secured against the keyboard supports and positions the tablet or documents at a fixed angle for improved viewing. The holder will accommodate items up to 0.8" thick and has a surface 10.7" H x 7.25 W. It can support up to 2.2 lbs.
Note: When this accessory is added to the WorkFit-S the total weight capacity of the workstation is reduced by 1 lb.

The SV Sit-Stand Combo Extender from Ergotron adds an additional 17" of horizontal reach to the wall-mounted StyleView Combo Arms. The additional extension distance permits a much greater degree of articulation and lateral movement so users are better able to optimize the positioning capabilities of the Combo Arm.

The new ThermoTread GT Desk Treadmill from iMovR is the first treadmill ever to be designed specifically for "Working While Walking". With the move towards active working the ThermoTread is the ideal treadmill solution for pairing with a sit-stand desk to create a true Walking Workstation.

Rather than attempting to adapt a traditional running treadmill to an office environment iMovR went directly to the drawing board and designed the ThermoTread GT from the ground up. The result is a treadmill built to suit the needs of the office environment--smaller footprint, lower profile, reduced noise levels, lower energy consumption, and most important of all-- safer.

At just 67.5" long the ThermoTread GT can be accommodated in the smallest of workstations while still providing a large 20" by 50" walking surface. The low deck height of 5" enables it to be successfully partnered with a wide range of sit-stand desks. Safety is important with the ThermoTread which is why it has a maximum speed of just 4 kph, a brisk walking pace for most adults. This feature greatly reduces the potential for injuries which can occur with repurposed or adapted treadmills.

The ThermoTread GT is able to offer lower energy consumption and extended life expectancy as the motor and gearing are designed for optimum power at walking speeds. Adapted treadmills are designed for optimum power at higher speeds and can be overloaded by continuous use at walking speeds, significantly reducing their lifespan. The ThermoDesk GT is rated for up to 400 lbs, making it a good choice even for heavier users who wish to move to a more active workstation.

The 1" thick Bakelite deck on the ThermoDesk GT provides a firm surface ideal for walking. The deck is supported by six compression shocks which allow the surface to absorb impact and reduce impact stress on the joints. The convenient touch-control interface of the ThermoDesk GT is placed on the desk surface for easy access and provides users with a full compliment of options for customizing the treadmill to their specific weight, stride length, speed, and desired working pattern. The multiscreen interface enables users to quickly navigate through all settings and adjust them as desired. Up to five user profiles can be stored for fingertip recall. Future software upgrades can easily be downloaded through the integrated USB port.

The upcoming iMovR CloudStation will connect the ThermoTread GT to the "Internet of Things", enabling detailed control of every aspect of the workstation environment by monitoring and controlling office device energy consumption, monitoring and recording treadmill usage, and providing maintenance data from anywhere in the world. It will also enable CloudStation users to access their personal profiles at any CloudStation-equipped ThermoTread GT in the world, offering a boundary-free health monitoring network.

The manufacturer recommends that the Thermotread GT Desk Treadmill be placed on a firm non-carpeted flooring surface. Users may wish to purchase the RightSize Premium Under-Treadmill Mat to protect hardsurfaced flooring from potential damage. Placement on carpeted surfaces may result in a "floating" effect and encourages collection of dust and lint within the treadmill. As well, in order to ensure premium performance and to optimize the life of the treadmill, regular lubrication of the treadmill deck is required using a 100% silicone spray such as the EasySpray Treadmill Lubricant.

The Taskmate EZ from HealthPostures is available in two models. The Computer Workstation version includes both an adjustable height work surface and monitor mount. The Surface version does not include the monitor mount but can be used as to elevate a laptop for short term use. The Surface version can also serve well as an adjustable assembly or work surface in industrial applications were individuals of varying height may utilize workstations. Taskmate EZ units are equipped by default with a thru-mount that bolts through the surface of the fixed height desk using a single hole. There is also a clamp mount accessory available that can be used to mount the Taskmate EZ to desks no deeper than 24". Both the work surface as well as the monitor height are independently reconfigurable by physically lifting and moving the unit from one notch to another, providing configuration options in 1.5" increments. The monitor can be attached to any of 14 notches in the vertical column, providing a range of height between keyboard tray and the middle of the monitor of a minimum of 13" and a maximum of 31.5".

The Taskmate EZ is capable of supporting up to 50 pounds, and provides the ability to set the monitor (at its midpoint) from 15" to 33" above the mounting surface. The work surface can be positioned from 2" to 20" above the mounting surface when being used with the monitor support and up to 33" above the mounting point when used without a monitor. The work surface provides an 18" deep x 23.5" wide area for the keyboard, mouse and papers. In idustrial settings it can serve to position tools and equipment at a range of heights. The monitor mount will accommodate monitors with either 75mm and 100mm VESA patterns. Some assembly is required (approximately 5-10 minutes).

The Taskmate Executive from HealthPostures is a modification-free way to create a full sit to stand workstation on any standard desk. This ruggedly constructed freestanding metal unit weighs over 50 lbs, sufficient to provide stability through its full range of movement. Height adjustment is via an electric motor that raises and lowers the monitor(s) and keyboard simultaneously. The upper surface can be adjusted to any point between 5.5" and 18.5" above the mounting surface, with the articulating keyboard arm offering its own independent range of adjustment of 5" to 10" below any upper surface height setting.

The Taskmate is relatively compact, with the base requiring only a 15" wide by 21"deep area on the worksurface. The keyboard tray can be cantilevered to 5" below the desk to 13" above the desk. Non slip pads for the base and Velcro are included to attach monitors to the top of the unit for added security. The top platform for the monitor is 30" x 14" with diagonally tapered front corners to accomodate ergonomic positioning of the two included 8.5" x 11" document holders/phone holders. The keyboard tray has an 18" x 9" area for the keyboard with a mousing zone that extends closer to the body. The tray can also be reversed for right or left handed mousing. An optional wrist rest is included with the tray.