Accessories

< 1 2


Ergo Flex Phone Arm

by Aidata



Telephones are often placed at the rear of a desk because of the need to have papers and other items in close proximity. However, the result is that individuals are then required to reach to the back of the desk each time they make or answer a call. ...



Telephones are often placed at the rear of a desk because of the need to have papers and other items in close proximity. However, the result is that individuals are then required to reach to the back of the desk each time they make or answer a call. For many this can result in repetitive overreaching. The Ergo Flex Phone Arm from Aidata is designed to reduce or eliminate this overreaching by permitting the phone to be brought forward (or up) into a position that brings it within the comfort zone. When extended forward to the maximum reach of 24" the phone sits about 6" above the desk surface, leaving the desk space free for papers or other equipment. The phone can also be raised up to 16" above the mounting clamp but does move away from the individual as it rises. The elevated positions can be of value where sit-stand retrofits are in use by facilitating elevation of the phone to be within reach while standing or leaning. The 8" x 9.5" platform is equipped with an adjustable (5" - 9" width) spring clip that will fit most phones and tilts up to 60° for easier access and viewing. The arm is also able to rotate a full 360° from the mounting point and includes built-in phone cable management.



Les téléphones sont souvent placés à l'arrière d'un bureau parce qu'il est nécessaire d'avoir des papiers et d'autres objets à proximité. Cependant, il en résulte que les personnes doivent tendre la main vers l'arrière du bureau chaque fois que la personne passent ou répond à un appel. Pour beaucoup de gens, cela peut entraîner des efforts répétitifs. L'Ergo Flex Phone Arm d'Aidata est conçu pour réduire ou éliminer ces efforts excessifs en permettant au téléphone d'être avancé (ou relevé) dans une position qui le place dans la zone de confort. Lorsque l'Ergo Flex Phone Arm est déployé vers l'avant jusqu'à la portée maximale de 24po, le téléphone se trouve à environ 6po au-dessus de la surface du bureau, laissant l'espace libre pour les papiers ou autres équipements. Le téléphone peut également être élevé jusqu'à 16po au-dessus de la pince de fixation, mais il s'éloigne de la personne lorsqu'il s'élève. Les positions surélevées peuvent être utiles en cas d'utilisation d'un système assis-debout, car elles permettent d'élever le téléphone pour qu'il soit à portée de main en position debout ou penchée. La plateforme de 8po x 9.5po est équipée d'une pince à ressort ajustable (largeur de 5-9po) qui s'adapte à la plupart des téléphones et s'incline jusqu'à 60° pour faciliter l'accès et la visualisation. Le bras est également capable de pivoter sur 360° à partir du point de montage et comprend un système intégré de gestion des câbles téléphoniques.






Models
Model #DescriptionPriceIn Stock?Buy Now
TA002BBlack model$50.00Yes





Under Desk Storage Organizer

by Aidata



The Under Desk Storage Organizer from Aidata is an economical desk accessory that provides storage space for basic office essentials. The Storage Organizer can be clamped to surfaces up to 40 mm thick, making it well-suited for use with sit-stand des ...



The Under Desk Storage Organizer from Aidata is an economical desk accessory that provides storage space for basic office essentials. The Storage Organizer can be clamped to surfaces up to 40 mm thick, making it well-suited for use with sit-stand desks that have forfeited traditional storage drawers. Because it is attached directly to the surface it raises and lowers with the desk, always remaining within reach for quick access. It even includes a removable square 7.5" mousing surface should it be required. The clamp mount permits a full 360° rotation that permits the storage organizer to be stored by pivoting below the surface in either direction. The portable clamp-on design also makes this suitable for temporary workstations where no other storage option is available and for use in combination with the Desk Clamp Keyboard Tray.



L'Under Desk Storage Organizer d'Aidata est un accessoire de bureau économique qui offre un espace de rangement pour les éléments essentiels du bureau. L'organisateur de rangement peut être fixé à des surfaces d'une épaisseur maximale de 40 mm, ce qui le rend bien adapté aux bureaux assis-debout qui ont perdu les tiroirs de rangement traditionnels. Comme il est fixé directement à la surface, il s'élève et s'abaisse avec le bureau, restant toujours à portée de main pour un accès rapide. Il comprend même une surface de souris carrée de 7.5po, qui peut aussi être enlevé si nécessaire. La pince de fixation permet une rotation complète à 360°, ce qui permet de ranger l'organiseur en le faisant pivoter sous la surface dans un sens ou dans l'autre. La conception portable de la pince permet également de l'utiliser sur des postes de travail temporaires où aucune autre option de rangement n'est disponible et de l'utiliser en combinaison avec le Desk Clamp Keyboard Tray.






Models
Model #DescriptionPriceIn Stock?Buy Now
DO-1020Under Desk Storage Organizer, Black$22.50Yes





Clamp-On Power Module

by Safco Products



The Clamp-On Power Module from Safco Products is a convenient desk-mounted accessory for users who need to have easy access to AC outlets and Ethernet Connections. This compact module will clamp to desks from 0.75" to 1.25" thick, and provides 3 desk ...



The Clamp-On Power Module from Safco Products is a convenient desk-mounted accessory for users who need to have easy access to AC outlets and Ethernet Connections. This compact module will clamp to desks from 0.75" to 1.25" thick, and provides 3 desk-level grounded power outlets alongside two ethernet data connections. The steel clamp is equipped with a non-skid pad and will not damage the mounting surface. It is has an 8' long power cord, long enough to accommodate the extra length required for mounting on height adjustable desks. The Ethernet ports connect just below desk height. This module is UL and CUL listed.






Models
Model #DescriptionPriceIn Stock?Buy Now
2059BLClamp-On Power Module, Black NO 30 DAY CSG. SPECIAL ORDER ONLY. $100.00No





ConSet CPU Holder

by ConSet



Increase desk space and reduce wire clutter with a ConSet CPU Holder. Designed to be mounted to the underside of the desk, the ConSet CPU Holder secures the CPU for free movement with the desk height adjustment, eliminating the risk of monitor and pe ...



Increase desk space and reduce wire clutter with a ConSet CPU Holder. Designed to be mounted to the underside of the desk, the ConSet CPU Holder secures the CPU for free movement with the desk height adjustment, eliminating the risk of monitor and peripheral cables being too short and getting pulled. The CPU Holder ensures that your CPU is readily accessible whether you are sitting or standing, helps keep the floor clear, and optimizes the available worksurface. The ConSet CPU Holder is available in both Silver and Black Models to match your ConSet Frame.






Models
Model #DescriptionPriceIn Stock?Buy Now
400-4BConset CPU Holder Accessory for Conset Bases, Black$85.00Yes
400-4SConset CPU Holder Accessory for Conset Bases, Silver$85.00Yes





ConSet Battery Kit Accessory

by ConSet



For users with height adjustable desks on wheels ConSet provides the Rechargeable Battery Kit Accessory for cordless convenience . The package includes a rechargeable battery, battery charger, and under-desk battery mount. When used in a conventional ...



For users with height adjustable desks on wheels ConSet provides the Rechargeable Battery Kit Accessory for cordless convenience . The package includes a rechargeable battery, battery charger, and under-desk battery mount. When used in a conventional office setting the battery will only need to be charged for approximately 2 hours every 2-4 weeks. Additional batteries and under-desk battery mounts can be purchased for powering additional desks.

This battery can be used with the following desks: 501-7, 501-17, 501-19, 501-25, 501-27, 501-29, 501-32.






Models
Model #DescriptionPriceIn Stock?Buy Now
BAT-24-1_7Conset Battery Kit Accessory, 24V Battery with Charger$315.00Yes





Steel Mini Pedestal

by Safco Products



The Steel Mini Pedestal from Safco Products can store papers, files, and other office supplies in a convenient and safe way. The lower file drawer can be configured for storage of letter or legal-size folders while the upper drawer can be used to sto ...



The Steel Mini Pedestal from Safco Products can store papers, files, and other office supplies in a convenient and safe way. The lower file drawer can be configured for storage of letter or legal-size folders while the upper drawer can be used to store smaller stationery and office supplies. Both drawers are lockable with a single key, thus providing a secure location for personal or sensitive documents. This pedestal is mobile on 4 casters (2 locking and 2 non-locking) and constructed of sturdy steel. This product is ideal for use with height adjustable desks, as its maximum height is about only 21" (clearing most sit-stand desks at their lowest height). The Steel Mini Pedestal is available in two models. The standard model which is just the pedestal and a model that includes a 10.5" W x 22" D x 1.5" thick padded seat that fits on top of the pedestal to create a storable temporary seat ideal for small workplaces.






Models
Model #DescriptionPriceIn Stock?Buy Now
LDSPEDKITS5Safco Products Steel Mini Pedestal, Black with Cushion Top, Grey$295.00Yes
LDSPEDS5Safco Products Steel Mini Pedestal, Black$250.00Yes





501-27 Support Extender Accessory

by ConSet



The 501-27 Support Extender Accessory is designed to provide extra stability when mounting larger extra-deep tops on the 501-27 frame, specifically L-shaped tops where the L side is 48". The kit includes both a leg extender which provides enhanced st ...



The 501-27 Support Extender Accessory is designed to provide extra stability when mounting larger extra-deep tops on the 501-27 frame, specifically L-shaped tops where the L side is 48". The kit includes both a leg extender which provides enhanced stability for the desk frame as well as an upper frame support which ensures proper support for the return extension of the desk top.






Models
Model #DescriptionPriceIn Stock?Buy Now
501-27 ES020501-27 Support Extender Accessory, Silver SPECIAL ORDER ONLY. $95.00No





Sun-Flex SwingStand

by Sun-Flex



The SwingStand from Sun-Flex is designed to encourage movement of the legs and feet at both adjustable and fixed-height desks. The SwingStand provides a bar on which to place either one foot (while standing) or both feet (while seated) and actively e ...



The SwingStand from Sun-Flex is designed to encourage movement of the legs and feet at both adjustable and fixed-height desks. The SwingStand provides a bar on which to place either one foot (while standing) or both feet (while seated) and actively engage the lower legs and feet in movement. The bar is supported on ball-bearings to facilitate an exceptionally smooth swinging motion.

When using the SwingStand, rather than standing with both feet planted, the user can raise one foot, rest it on the SwingStand bar and let it gently swing. This simple movement eases pressure on the sole of the feet, engages the calf muscles to pump blood out of lower legs - reducing the risk of edema, and moves the ankle through a limited range of motion with only limited weight-bearing. This same action also works to provide relief for the lower back. With prolonged standing, the natural curvature of the back often becomes gradually more extreme as the muscles tire. This poor posture can result in fatigue at work, and backache at the end of the day. Raising and supporting one foot changes the muscle position - permitting the toxins to be removed and the cells to be rejuvenated. It also reduces the extreme curvature, allowing the back to return to its stronger, more gently curved S-shape. The partially supported stance helps to alleviate muscle fatigue and reduce the risk of back pain. The low 3.5" height of the bar lets the user easily switch from one foot to the other.

The SwingStand is also beneficial for when seated, permitting users to actively move one or both legs which encourages lower limb circulation throughout the day. Some users may also find that the movement aids in maintaining focus on their activities, serving to redirect undesirable muscle activity that might otherwise be distracting.

The Sun-Flex SwingStand provides over 15.5" of bar width for resting the feet. The heavy steel frame will keep it in place and stable under use but can still be moved in or out below a desk if desired when adjusting the workstation between standing and seated work positions.






Models
Model #DescriptionPriceIn Stock?Buy Now
455003Sun-Flex SwingStand, Black, 23.6" W x 14.2" D x 14.0" H NO ETA. $190.00No





< 1 2


About Us Services Manufacturers Legal Notices Privacy