The 7Flex Dual monitor arm is an affordable, reliable gas-cylinder articulating dual monitor solution which provides independent effortless adjustment of both monitors through the full range of motion - in all three planes. It offers superior adjustability when compared with many other entry-level dual LCD arms: 16" of vertical range; 24" of horizontal reach; 360° of rotation at 3 joints; 200° of monitor tilt; and monitor pivot from portrait to landscape. Since each monitor has its own articulating arm, monitors of different size or weight are usually not a problem. Each arm can accommodate monitors equipped with either 75mm or 100mm VESA mounts and weighing between 5 and 17 pounds. The 7Flex Dual comes with a FLEXmount which includes 4 different mounting configurations: desk clamp, through desk, desk side, and grommet hole clamp mount. The 7Flex Dual can fold up to occupy 3" of space, will work with any VESA compatible monitor, and includes cable clips to improve cable management. The arm is a proven, durable design manufactured using die cast aluminum, and comes with a 10 year warranty.

Note: When mounted on the desktop, the maximum height to the centre of the monitors is 18.7”.

Le 7Flex Dual économique est un bras d'articulation avec verin à gaz (gas cylinder) pour deux moniteurs fiable qui offre l'ajustement avec une gamme complète de mouvement sans effort des deux moniteurs dans trois dimensions. Il offre l'ajustement supérieur que beaucoup de modèles de base des bras pour deux moniteurs: 16po de mouvement vertical, étendre jusqu'à 24po, 360° de rotation à 3 joints; 200° d'inclinaison de moniteur, et pivot entre l'affichage vertical à l'affichage horizontal. Puisque chaque moniteur à son propre bras d'articulation, les moniteurs de différente tailles ou poids sont typiquement pas un problème. Chaque bras peut soutenir des moniteurs avec 75mm ou 100mm Vesa mounts et qui sont entre 5 et 17 livres de poids. Le 7Flex Dual vient avec un FLEXmount qui inclut 4 options de fixations: fixation à pince de bureau, à travers le bureau, à côter, et fixation d'oeillet. Le 7Flex Dual peut être plié et ranger pour prendre seulement 3po d'espace, est compatible avec les moniteurs de n'importe VESA, et inclus des canaux en plastiques pour câbles pour un système de gestion de câbles. Le bras est reconnu pour être durable, fabriquer avec des moulage sous pressions, et vient avec une garantie de 10 ans.

Veuillez noter: Quand ce produit est fixer sur le bureau, la hauteur maximum du millieu du moniteur est 18.7po.

The 7500-Wing Dual Monitor Arm has all the advantages of the 7500 Deluxe Monitor Arm, with the additional feature of mounting two monitors either horizontally (side by side) or vertically (stacked one over another) through the use of the Switch Dual Monitor Bracket Accessory (8428-124). This arm offers a wide range of motion, rotates 360° at three joints, with a monitor tilt mechanism that can tilt over 200°. Each monitor can be independently rotated, while the arm can accommodate most 24" diagonal widescreen monitors. However the monitors cannot exceed the weight capacity of arm, and must not exceed 23" of actual horizontal width (including the bezel). Included are Quick Release adapters for ease of attaching and removing monitors, and a spring-assisted Heavy Duty (HD) Tilter.

Le 7500-Wing Dual Monitor Arm a tous les avantages du bras 7500 Deluxe Monitor Arm, avec une caractéristique supplémentaire d`être capable de mettre deux moniteurs sois dans une position horizontal (côté-à-côté) ou vertical (par-dessus l`autre) avec l`usage d`un accessoire Switch Dual Monitor Bracket Accessory (8428-124). Ce bras offre une gamme de mouvement, 360° de rotation à trois joints avec une mécanisme qui peut faire le moniteur incliner plus que 200°. Chaque moniteur peut être tourner indépendamment, et le bras peut accepter la majorité des moniteurs de 24po. Les moniteurs ne doivent pas être plus péssants que la capaciter du bras, et ne peuvent pas dépasser la largeur horizontal de 23po. Inclus avec ce bras est des adapteurs Quick Release pour faciliter la fixation et d`enlever, aussi qu`un spring-assisted Heavy Duty (HD) Tilter.

The Bild is a multi-monitor mounting system that can be easily configured to meet a wide range of applications. Starting with a dual mount system, it is possible to build almost any multi-monitor system by adding just the components that are needed, making the Bild an easily modifiable mounting option.

The design of the Bild also makes it easy to add, adjust, or remove monitors. Additional beams can be added to the base unit and positioned flat or in an arch for the best viewing angle. Sliding mount cups allow easy positioning of monitors. Also, an optional height adjustable base is available for multi-user workstations where individuals of different heights can set the monitors at their own optimal height.

Desk mounting options include desk clamp, through mount, or rail mount. Beam mounting options include pole mount, static column mount, or motorized column mount. Available in silver or black.

The product components for a Dual Bild with through mount and static column in black are as follows: BILD-2-NM-104 (x1), 8480-16.5-TM-603 (x1).

The product components for a Triple Bild with through mount and static column in black are as follows: BILD-3-NM-104 (x1), 8480-16.5-TM-603 (x1).

The product components for a Quad Bild with through mount and static column in black are as follows: BILD-2-NM-104 (x1), 8470-20-104 (x2), 8477-HQ-104 (x2), 8480-16.5-TM-603 (x1).

For other mount configurations, please call.

The Tempo Dual Monitor Arm from KV Waterloo is a versatile, stylish monitor arm made of diecast aluminum for dual monitors ranging in total weight from 15 to 40 lbs. This arm uses a gas spring mechanism for smooth movement in all directions with 14.5" of vertical range and a maximum horizontal extension of 26.75" (from back of monitor mount to VESA plate). The lower arm is fixed at a 45° angle, ensuring that arm movement is not obstructed by other items on the desktop. The counterbalance on the arm has a numbered weight gauge (15 to 40 lbs) to provide an indication of the current counterbalance weight. Cable management is included, consisting of a hollow plastic tube and cable clips, and the Quick Connect Adaptor simplifies mounting and swapping monitors when needed. Maximum monitor size is 24" (diagonally). The maximum physical width the arm can accommodate is 23".

The 7760AS model comes with both clamp and grommet mounting systems.

The Dual Horizontal 100 Series Desk Stand is an expandable, modular, tool-less Freestanding monitor mounting solution which allows two monitors to be positioned in a seamless 'side-by-side' orientation. The 25" wide crossbar has 2 Standard Quick Release Pivots which are capable of tilting 20° up, 10° down and 25° left and right and accommodate monitors up to 24" (measured diagonally bezel to bezel). This allows sufficient range of movement to ensure monitors are in almost any desired position relative to each other in addition to the capability of rotating from portrait to landscape orientation. The pivots are VESA 75 and 100 compatible and can be adjusted along the crossbar. The heavy weighted 16" wide x 10" deep base and stand is 9 lbs and the vertical pole is 16".

The Dual Vertical 100 Series Desk Stand is an expandable, modular, tool-less Freestanding monitor mounting solution which allows two monitors to be positioned in a seamless 'one-above-the-other' orientation. The 28" pole has 2 Standard Quick Release Pivots are capable of tilting 20° up, 10° down and 25° left and right and accommodate monitors up to 24"(measured diagonally bezel to bezel). This allows sufficient range of movement to ensure monitors are in almost any desired position relative to each other in addition to the capability of rotating from portrait to landscape orientation. The standard pivots are VESA 75 and 100 compatible and can be adjusted up and down the pole. The heavy weighted 16" wide x 10" deep base is 10 lbs and the vertical pole is 28".

Each monitor can be between 7 and 20 lbs, notebook between 2.5 and 12 lbs, max combined weight is 40 lbs.13" of lift. 12" tall pole.Includes Notebook mount accessory. Comes with desk clamp and grommet mount.

The LX Dual Side-by-Side Arm from Ergotron allows a fully adjustable side-by-side configuration that lifts both LCD screens up to where they are easier to see while reclaiming valuable worksurface. Made of durable polished aluminum, the 45-245-026 allows you to reposition your LCDs with just a touch (up, down, forward, and back), providing unparalleled range of motion. Save time by using multiple applications at once - eliminate toggling back and forth between documents and programs.

NOTE: We strongly recommend getting the LX Dual Stacking Arm instead, since the latter also has two arms but has more height adjustment and includes the optional notebook mount accessory, all for the same price.

The EasyLift Dual Monitor Arm from Key Ovation is an accessory designed to be used solely with the Goldtouch EasyList Sit/Stand Desk Pro. Durable and lightweight, the EasyLift can accommodate two monitors up to 27" wide and 15 lbs each. Monitors can be tilted, rotated, and cantilevered for optimal positioning with a height range from 7.1" to 16.3" (mid-monitor). Available in silver colour with desk clamp or through desk mounting options.

NOTE: This monitor arm's mount design restricts its use to the Goldtouch EasyList Sit/Stand Desk Pro only.

The R-Go Zepher 4 C2 Dual Monitor Arm from R-Go Tools is a desk-clamp arm for dual monitors. It has a hinged arm for vertical extension 8" to 22" (20 - 56 cm) with a height range of 11.5" to 19.5" (29 - 50 cm), a tilt range of 40°, rotation of 360°, and swivel range of 180°. The monitors mount to each arm using a 75x75 mm and 100x100 mm VESA plate. The Zepher 4 C2 Dual can handle weights from 0 to 17.6 lbs (8 kg) for each monitor.

The Zepher 4 C2 Dual Monitor Arm uses three "Smart" technologies in its design. The Smart Lock feature allows attachment of the monitor to the arm with one click. The Smart Connect feature connects all modules together without tools and in an intuitive way. The Smart Stop feature secures the rotation of the arm in a certain direction with the rotation stop. In addition, the arm is certified to be 100% circular*.

Note: "100% circular" means modules can be re-used with a life-time take back guarantee, the product is certified 100% recyclable, 75% of the aluminium is recyled raw material, materials are easily separable using smart-fits, and product boxing is 100% carton packaging material. Due to the cost of returning these to the manufacturer it may be more practical to direct them to a local recycler.