The new ThermoTread GT Desk Treadmill from iMovR is the first treadmill ever to be designed specifically for "Working While Walking". With the move towards active working the ThermoTread is the ideal treadmill solution for pairing with a sit-stand desk to create a true Walking Workstation.

Rather than attempting to adapt a traditional running treadmill to an office environment iMovR went directly to the drawing board and designed the ThermoTread GT from the ground up. The result is a treadmill built to suit the needs of the office environment--smaller footprint, lower profile, reduced noise levels, lower energy consumption, and most important of all-- safer.

At just 67.5" long the ThermoTread GT can be accommodated in the smallest of workstations while still providing a large 20" by 50" walking surface. The low deck height of 5" enables it to be successfully partnered with a wide range of sit-stand desks. Safety is important with the ThermoTread which is why it has a maximum speed of just 4 kph, a brisk walking pace for most adults. This feature greatly reduces the potential for injuries which can occur with repurposed or adapted treadmills.

The ThermoTread GT is able to offer lower energy consumption and extended life expectancy as the motor and gearing are designed for optimum power at walking speeds. Adapted treadmills are designed for optimum power at higher speeds and can be overloaded by continuous use at walking speeds, significantly reducing their lifespan. The ThermoDesk GT is rated for up to 400 lbs, making it a good choice even for heavier users who wish to move to a more active workstation.

The 1" thick Bakelite deck on the ThermoDesk GT provides a firm surface ideal for walking. The deck is supported by six compression shocks which allow the surface to absorb impact and reduce impact stress on the joints. The convenient touch-control interface of the ThermoDesk GT is placed on the desk surface for easy access and provides users with a full compliment of options for customizing the treadmill to their specific weight, stride length, speed, and desired working pattern. The multiscreen interface enables users to quickly navigate through all settings and adjust them as desired. Up to five user profiles can be stored for fingertip recall. Future software upgrades can easily be downloaded through the integrated USB port.

The upcoming iMovR CloudStation will connect the ThermoTread GT to the "Internet of Things", enabling detailed control of every aspect of the workstation environment by monitoring and controlling office device energy consumption, monitoring and recording treadmill usage, and providing maintenance data from anywhere in the world. It will also enable CloudStation users to access their personal profiles at any CloudStation-equipped ThermoTread GT in the world, offering a boundary-free health monitoring network.

The manufacturer recommends that the Thermotread GT Desk Treadmill be placed on a firm non-carpeted flooring surface. Users may wish to purchase the RightSize Premium Under-Treadmill Mat to protect hardsurfaced flooring from potential damage. Placement on carpeted surfaces may result in a "floating" effect and encourages collection of dust and lint within the treadmill. As well, in order to ensure premium performance and to optimize the life of the treadmill, regular lubrication of the treadmill deck is required using a 100% silicone spray such as the EasySpray Treadmill Lubricant.

The ELITE Electric Height Adjustable Desk Base from iMovR is an advanced, versatile and elegant electric height-adjustable frame with multiple width-adjustment settings for tabletops ranging from 48" to 83" wide. Synchronized ultra quiet (under 46 dB) BOSCH motors are housed in each leg, providing a travel speed of 1.5" per second with a lift capacity of 265 lbs. Height adjustment ranges from 24" to an impressive 50". The digital control offers 4 programmable memory presets and displays the actual height in inches. In addition, the energy consumption of the electrical parts is low: less than half a watt in standby mode and only 1.4A under continuous lift.

The ELITE desk base comes in both black and silver models.

Thermodesk ELITE and Omega Everest Thermodesk Tabletops equipped for quick measure-free installation on the Elite frames are available in numerous widths and colours.

The EcoLast Premium Standing Mat by iMovR is ideal for users who need a balance of comfort and support for standing applications. These 0.75" thick mats feature high-density 100% polyurethane material, which can handle the heavy usage of a workplace environment without losing resiliency (i.e. bottoming out, fatiguing or collapsing over time). This material is stain and puncture resistant, has anti-microbial properties, and is cast in a unibody mold.

The high degree of cushioning or "bounce" which EcoLast mats provide can reduce spinal compression and reduce or prevent discomfort in the feet, legs and lower back. In addition, the movement which the mats encourage can also aid in encouraging flexing of the calf muscles which can result in improved bloodflow in the lower legs. By encouraging users to move and flex their feet throughout the day the mats can reduce the constant stress which joints of the lower limbs are subjected to, spreading the load over a wider area and reducing the potential for stiff and aching joints resulting from inactivity.

Unlike some "anti-fatigue" mats which are advertised as being suitable for either standing or for sitting on in an office chair - EcoLast mats are designed for standing only. The result is that EcoLast mats provide a much higher degree of cushioning than those other "hybrid use" mats, providing users with greater comfort throughout the day.

iMovR EcoLast mats are manufactured in the USA and certified by the National Floor Safety Institute for their high traction no-slip bottom surface. All edges are beveled at 20° which greatly reduces the potential for the mat becoming a tripping hazard. They are available in a 24" by 26" size to meet the needs of most implementations, and come in Black, Burgundy, and Gray (Brown and Tan are special order only).

Users who prefer to work without footwear may find the GelPro Elite Anti-Fatigue Mat a more appealing alternative as it is designed with this type of usage in mind.

The Omega Denali ThermoDesk Table Top from iMovR introduces a new concept in keyboard tray design. Inset directly into the surface of the table top, the "SteadyType" keyboard tray helps users at standing and walking workstations reduce wrist extension and "monitor shake." It can also help users at treadmill desks counter the backwards-pulling effect of the treadmill.

Users moving to standing workstations and treadmill desks can sometimes find it difficult to position the keyboard at a steep enough negative incline. The result is the upward bend at the wrist, known as wrist extension, that can increase the risk of injury to the hands, wrists and forearms. The "SteadyType" design allows users to adjust the angle of the tray from 0° to -85°.

The "SteadyType" keyboard tray is an even greater step forward in keyboard positioning for treadmill users. To counter the tendency to drift backwards on the treadmill as they type, users often anchor the heels of their hands to the desk, exerting significant downward force from the upper body in an effort to keep their hands in position over the keyboard. With a greater degree of negative tilt on the keyboard, users can avoid this backwards drift by bracing themselves passively against the keyboard. With the keyboard tray inclined at a steeper negative incline the backwards pull of the treadmill now works in the user's favour to hold the user's hands in position against the keyboard.

This improved hand and wrist positioning enables users to maintain a better walking posture while letting the muscles of the hands, forearms and upper body relax. This more natural posture will result in improved typing performance over standard flat-topped walking workstations. By integrating the "SteadyType" keyboard tray into the body of the table top and moving it closer to the centre of the desk's crossbar, iMovr has succeeded in significantly reducing the phenomenon known to users of height adjustable workstations as "monitor shake."

On the Omega Denali table top, the mouse sits flat on the primary desk surface but remains easily accessible within the Comfort Zone due to the unique positioning of the keyboard 'in' the desktop. The "SteadyType" keyboard tray has two height settings that enable the user to select the most beneficial positions for the keyboard and mouse relative to each other.

The Omege Denali ThermoDesk Table Tops feature softly rounded edges and corners. Using 3D Lamination Technology, the 1 1/8" thick high-density MDF tops are vacuum-wrapped at high heat. This creates a complete and seamless film across the top and edges of the table top, and even includes the grommet hole interiors. The worksurface is completely non-porous, ensuring protection from humidity and liquids. Multiple layers of finish provide resistance to abrasion and damage from many common cleaning and disinfectant products. A wide palette of colours, including Hayward Cherry, Clove Mahogany, Light Maple and Urban Walnut ensure the right tone in any office environment from entry level to senior executive.

The Omega Denali tops are pre-drilled to fit the iMovR RELEVATE manual adjust frame and fitted with threaded metal inserts that ensure quick and measure-free installation with a single Phillips screwdriver. The metal inserts ensure a well-secured top as well as the ability to remove and replace tops without wear on the mounting points.

Note:The Omega Denali tops may be installed on other sit-stand desk frames but the threaded inserts might not be usable in those applications. It will also be necessary to ensure that these frames do not interfere with the incline and height adjustment of the integrated SteadyType keyboard tray.

The EcoLast Portable Standing Mat by iMovR has the same top-quality material and features of the EcoLast Premium Standing Mat but also includes the additional feature of portability. These 0.75" thick mats feature high-density 100% polyurethane material, which can handle the heavy usage of a workplace environment without losing resiliency (i.e. bottoming out, fatiguing or collapsing over time). This material is stain and puncture resistant, has anti-microbial properties, and is cast in a unibody mold that includes a built-in handle.

The high degree of cushioning or "bounce" which EcoLast mats provide can reduce spinal compression and reduce or prevent discomfort in the feet, legs and lower back. In addition, the movement which the mats encourage can also aid in encouraging flexing of the calf muscles which can result in improved bloodflow in the lower legs. By encouraging users to move and flex their feet throughout the day the mats can reduce the constant stress which joints of the lower limbs are subjected to, spreading the load over a wider area and reducing the potential for stiff and aching joints resulting from inactivity.

Unlike some "anti-fatigue" mats which are advertised as being suitable for either standing or for sitting on in an office chair - EcoLast mats are designed for standing only. The result is that EcoLast mats provide a much higher degree of cushioning than those other "hybrid use" mats, providing users with greater comfort throughout the day.

iMovR EcoLast mats are manufactured in the USA and certified by the National Floor Safety Institute for their high traction no-slip bottom surface. All edges are beveled at 20° which greatly reduces the potential for the mat becoming a tripping hazard. They are available in a compact 18" by 22" size and come in Black or Brown colour.

Those who prefer to work without footwear may find the GelPro Elite Anti-Fatigue Mat a more appealing alternative as it is designed with this type of usage in mind.

The ThermoDesk Upsilon Table Tops from iMovR are constructed with 3/4" thick high-density MDF cores, machined with softly rounded edges and corners. The finish is 3D vacuum laminated at high heat with the resulting laminate finish fully wrapped around the top, the sides, and the grommet hole interiors in one complete and seamless film. This process ensures a fully sealed, non-porous surface that protects against damage caused by humidity and exposure to liquids. Multiple layers of finish provide additional resistance against abrasion and damage from many common cleaning and disinfectant products. Finishes available include Hayward Cherry, Clove Mahogany and Light Maple woodgrains or Black, Shark Grey and Designer White solid colours. This attention to the details of construction and finish ensure that the Upsilon Table Tops will compliment any office.

ThermoDesk Upsilon table tops have dual 2.35" grommet holes and are pre-drilled to fit the iMovR UpStage 24 frame for simplified installation. (Note: ThermoDesk Upsilon tops can be installed on other sit-stand desk frames but the predrilled holes may not be usable in those applications.)

The ELECTRA Electric Height Adjustable Desk Base from iMovR is an advanced, versatile and elegant electric height-adjustable frame with an infinite width-adjustment range between 44" and 75" for tabletops ranging from 48" to 83" wide. Dual synchronized ultra quiet (under 42 dB) TiMotion motors, one housed in each leg, provide a travel speed of 1.7" per second with a lift capacity of 180 lbs. Height adjustment ranges from 25" to an impressive 51", including the 3/4" tabletop (not included but sold separately).

The ELECTRA desk base comes in both black and silver models.