The RELEVATE Manual Height Adjustable Desk Base from iMovR is a sturdy, hand-cranked desk unit made for lifting 200 lbs of weight from 29" to 48" in height (not including tabletop). The RELEVATE has an infinitely adjustable width range between 32.75" to 53" (measured between the legs), which can accommodate tabletop sizes from 42" and 72" in width and 24" to 36" in depth. Lift speed is three turns per inch.

RELEVATE frames can be conveniently paired with the ThermoDesk ELLURE or Omega Denali Thermdesk premium 1.125" thick 3D-laminated tabletops, which are pre-drilled to fit the RELEVATE frames and equipped with threaded metal inserts, ensuring quick and easy assembly. As well, existing or custom-built tops can easily be attached using the mounting holes on the RELEVATE frames.

The Thermodesk ELLURE Table Tops from iMovr are constructed with 1 1/8" thick high-density MDF cores, machined with softly rounded edges and corners. The finish is 3D vacuum laminated at high heat with the resulting laminate finish fully wrapped around the top, the sides, and the grommet hole interiors in one complete and seamless film. This process ensures a fully sealed, non-porous surface that protects against damage caused by humidity and exposure to liquids. Multiple layers of finish provide additional resistance against abrasion and damage from many common cleaning and disinfectant products.

A wide palette of colours is available, including Hayward Cherry, Clove Mahogany, Light Maple and Urban Walnut. This attention to the details of construction and finish ensure that the commercial grade Thermodesk ELLURE Table Tops will provide the right tone in any office environment--from entry level to the most senior executive.

The table tops are pre-drilled to fit the iMovr RELEVATE frame (formerly known as the Ellure) and are fitted with threaded metal inserts that ensure quick and easy installation with a single Phillips screwdriver. The metal inserts ensure a well-secured top as well as the ability to remove and replace tops without wear on the mounting points. (Note: Thermodesk ELLURE tops can be installed on other sit-stand desk frames but the threaded inserts may not be useable in those applications.)

The Upstage 24 Height-Adjustable Desk Base from iMovR is an electric height-adjustable frame that is ideal for smaller spaces. Specially designed for 24" deep table tops, the Upstage 24 base can accommodate table top widths from 42" to 59". With a rated lifting capacity of 265 lbs, this base is quiet (less than 41 dB) yet moves at a comfortable 1.45 inches per second and includes acceleration and deceleration dampening to avoid any sudden jolting while starting or stopping. The height adjustment range is equally impressive at 24.5" to 49.5", controlled by a simple up/down switch.

The Upstage 24 is compatible with iMovR's ThermoDesk Upsilon Table Tops (three widths available in multiple colour options, all at 0.75" thickness), which are pre-drilled to fit this base for easy installation.

The EcoLast TreadTop Standing Mat by iMovR has the same top-quality material and features of the EcoLast Premium and Portable Standing Mats but is designed specifically for use on the ThermoTread GT by iMovR. These 0.75" thick mats feature high-density 100% polyurethane material, which can handle the heavy usage of a workplace environment without losing resiliency (i.e. bottoming out, fatiguing or collapsing over time). This material is stain and puncture resistant, has anti-microbial properties, and is cast in a unibody mold.

The high degree of cushioning or "bounce" which EcoLast mats provide can reduce spinal compression and reduce or prevent discomfort in the feet, legs and lower back. In addition, the movement which the mats encourage can also aid in encouraging flexing of the calf muscles which can result in improved bloodflow in the lower legs. By encouraging users to move and flex their feet throughout the day the mats can reduce the constant stress which joints of the lower limbs are subjected to, spreading the load over a wider area and reducing the potential for stiff and aching joints resulting from inactivity.

Unlike some "anti-fatigue" mats which are advertised as being suitable for either standing or for sitting on in an office chair - EcoLast mats are designed for standing only. The result is that EcoLast mats provide a much higher degree of cushioning than those other "hybrid use" mats, providing users with greater comfort throughout the day.

iMovR EcoLast mats are manufactured in the USA and certified by the National Floor Safety Institute for their high traction no-slip bottom surface. All edges are beveled at 20° which greatly reduces the potential for the mat becoming a tripping hazard. They are available in a trim 20" by 32" size and come in Black colour only.

Users who prefer to work without footwear may find the GelPro Elite Anti-Fatigue Mat a more appealing alternative as it is designed with this type of usage in mind.

The Upstage 30 Height-Adjustable Desk Bases from iMovR are electric height-adjustable frames that offer great versatility in options and configuration. Specially designed for 30" deep table tops, the Upstage 30 bases are available in two widths, offering a solution for tops from 42" to 83" in width. The UpStage 30 Narrow (DB-UG30CN) can accommodate 42" to 59" wide tops. The UpStage 30 Wide (DB-UG30CW) will accept 71" to 83" tops.

With a rated lifting capacity of 265 lbs, Upstage 30 bases are quiet (less than 41 dB) yet move at a comfortable 1.5 inches per second and include acceleration and deceleration dampening to avoid any sudden jolting while starting or stopping. The height adjustment range is equally impressive at 24" to 49". A programmable control panel with digital readout indicates the current height and enables the user to program up to three preset heights.

Upstage 30 bases are compatible with iMovR's Thermodesk UpTown Select Table Tops (five widths available in multiple colour options, all at 1.125" thickness), which are pre-drilled to fit these bases for easy installation.

The ThermoDesk Uptown Select Table Tops from iMovr are constructed with 1 1/8" thick high-density MDF cores, machined with softly rounded edges and corners. The finish is 3D vacuum laminated at high heat with the resulting laminate finish fully wrapped around the top, the sides, and the grommet hole interiors in one complete and seamless film. This process ensures a fully sealed, non-porous surface that protects against damage caused by humidity and exposure to liquids. Multiple layers of finish provide additional resistance against abrasion and damage from many common cleaning and disinfectant products. A wide palette of colours is available, including Hayward Cherry, Clove Mahogany, Light Maple and Urban Walnut. This attention to the details of construction and finish ensure that the Uptown Select Table Tops will compliment any office.

Uptown Table Tops feature dual 3" grommet holes and are equipped with threaded steel inserts for effortless installation on the iMovr UpStage 30 frames using a single Phillips screwdriver. The 47" and 59" tops will fit the UpStage 30 Narrow frame while the 71" and 83" tops are equipped to match the UpStage 30 Wide frames. The metal inserts ensure a well-secured top as well as the ability to remove and replace tops without wear on the mounting points. (Note: ThermoDesk Uptown Select tops can be installed on other sit-stand desk frames but the threaded inserts may not be useable in those applications.)

These high quality Power Nodes from iMovR are designed to fit 3" grommet holes and provide desktop power access. A locking ring locks the node into place from the underside of the desk. There are two models available, one offering Dual AC outlets and the second model offering a single AC outlet and dual USB outlets. All models are equipped with a sturdy 6 foot cord to route power from floor level, even on sit-stand desks.

The ThermoDesk ELITE Table Tops from iMovr are constructed with 1 1/8" thick high-density MDF cores, machined with softly rounded edges and corners. The finish is 3D vacuum laminated at high heat with the resulting laminate finish fully wrapped around the top, the sides, and the grommet hole interiors in one complete and seamless film. This process ensures a fully sealed, non-porous surface that protects against damage caused by humidity and exposure to liquids. Multiple layers of finish provide additional resistance against abrasion and damage from many common cleaning and disinfectant products. A wide palette of colours is available, including Hayward Cherry, Clove Mahogany, Light Maple and Urban Walnut. This attention to the details of construction and finish ensure that the commercial grade ThermoDesk ELITE Table Tops will provide the right tone in any office environment--from entry level to the most senior executive.

The table tops are pre-drilled to fit the iMovr ELITE frame and are fitted with threaded metal inserts that ensure quick and easy installation with a single Phillips screwdriver. The metal inserts ensure a well-secured top as well as the ability to remove and replace tops without wear on the mounting points. (Note: ThermoDesk ELITE tops can be installed on other sit-stand desk frames but the threaded inserts may not be useable in those applications.)

The Omega Everest Table Top, part of iMovr's ThermoDesk line, features an innovative keyboard tray built directly into the surface of the table top. The new "SteadyType" keyboard tray helps reduce wrist extension and monitor shake at standing and walking workstations, and helps users of treadmill desks counter the 'backwards-pulling' effect of the treadmill.

Users moving to standing workstations and walking workstations can sometimes find it difficult to position the keyboard at a steep enough negative incline. The result is wrist extension, i.e. an upward bend at the wrist that can increase the risk of injury to the hands, wrists and forearms. The integrated, inset design of the "SteadyType" keyboard tray allows users to position the keyboard at steep negative inclines, from 0° to -85°.

Another issue for walking workstation users is the tendency to anchor the heels of the hands to the desk in an effort to keep their hands correctly positioned over the keyboard. This results in a constant, and significant strain on the muscles of the arms, shoulders and upper body. The greater degree of negative tilt offered by the "SteadyType" keyboard tray helps users more easily counter the backwards pulling effect of the treadmill. With the keyboard tray inclined at a steeper negative incline the backwards pull of the treadmill now works in the user's favour to hold the user's hands in position against the keyboard.

Both of the above issues are addressed by the SteadyType Keyboard Tray. The improved hand and wrist positioning enables users to maintain good walking posture while letting the muscles of the hands, forearms and upper body relax. This more natural posture will result in improved typing performance over standard 'flat-topped' walking workstations.

By integrating the "SteadyType" keyboard tray into the body of the table top and moving it closer to the centre of the desk top, iMovr has succeeded in significantly reducing the phenomenon known to users of height adjustable workstations as 'monitor shake'.

On the Omega Everest table top, the mouse sits on the primary desk surface but remains easily accessible within the Comfort Zone due to the unique positioning of the keyboard 'in' the desktop. The "SteadyType" keyboard tray has two height settings that enable the user to select the most beneficial positions for the keyboard and mouse relative to each other.

The 1 1/8" thick Omega Everest ThermoDesk Table Tops feature softly rounded edges and corners, vacuum-wrapped at high heat. The 3D Lamination process creates a seamless surface and the grommet hole interiors are perfectly covered and sealed. The worksurface has no sharp edges or square corners and is completely non-porous, helping to protect it from humidity and spilled liquids. Multiple layers of finish provide resistance to abrasion and damage from many common cleaning and disinfectant products. A wide palette of colours, including Hayward Cherry, Clove Mahogany, Light Maple, Urban Walnut and others ensure the right tone in any office environment from entry level to senior executive.

The Omega Everest tops are pre-drilled to fit the iMovR Elite electric height-adjustable desk frame and are fitted with threaded metal inserts to ensure quick and measure-free installation with a single Phillips screwdriver. The metal inserts ensure a well-secured top as well as the ability to remove and replace tops without wear on the mounting points.

Note: Omega Everest tops may be installed on other sit-stand desk frames; however, the threaded inserts might not be useable. It will also be necessary to ensure that these frames do not interfere with the incline and height adjustment of the integrated SteadyType keyboard tray.

The ZipLift Sit-Stand Converter from iMovR converts any fixed-height desk into a height-adjustable work space. This sturdy and solid desk converter has infinite height adjustment of 13.8" with smooth movement and no bounce-back or settling after locking the desired height. At the highest setting with the upper platform at 20.6" above the desk, there is no detectable "wobbling" or movement of any kind of the mechanism, even when typing. When raising the platform up, the platform and keyboard tray cantilevers forward, so that the user moves away from the stationary desk while standing.

The upper platform for monitor, tablets, or documents is 35.4" wide by 15.7" deep, while the keyboard tray is 26.4" wide by 13" deep. Two hand-release levers are used to unlock the unit for adjusting up or down via the gas-cylinder Z-lift mechanism. Additional features include a 2" grommet hole at the back of the upper platform for attaching monitors, and a tilting mechanism (+/- 10°) for the keyboard tray for those who want their keyboard and mouse at a negative incline while standing.

Available only in black.