The Document Holder for Monitor Arms by Vu Ryte attaches to the tilter of a standard monitor arm (not included), allowing the user to position reference materials alongside a computer monitor. The ledge on both models can accommodate a book or a thick stack of papers. As well, both models include a clip to secure papers, and a line guide. Positioning reference materials at the same height as the monitor and directly beside it helps to reduce neck and upper back strain associated with viewing documents placed flat on the desk. Removing papers from the desk surface also allows the user to bring tools such as numeric keypads or calculators further into the comfort zone.

The Document Holder for Monitor Arms comes in two sizes—the 18” wide VUR-18MA, and the 14” wide VUR-14MA. Both attach to a VESA plate on a monitor arm using the 100 mm x 100 mm VESA hole pattern on the document holder.

IMPORTANT: Units are compatible only with pole mounted (or mechanically adjustable) monitor arms having a VESA 100 mm x 100 mm mount bracket and no minimum weight requirements. They are not compatible with spring mechanism or gas cylinder monitor arms which require the weight of a monitor to function correctly

The Vu Ryte 59GR Inline Document Holder mounts in conjunction with a monitor on any VESA-compatible monitor mount, keeping documents directly in front of users regardless of the position of the monitor. This helps to reduce neck and upper back strain caused by constant movement of the head (which occurs when users are viewing documents placed flat on the desk or to the side), and to reduce elbow and shoulder strain caused by overreaching when repositioning reference materials. By attaching directly to the monitor arm, the VUR-59GR moves in tandem with the monitor, making it suitable for use even with sit/stand monitor arms. In addition, the VUR-59GR optimizes workspace by floating above the desk, thereby allowing other desk tools to be brought into the user's comfort zone.

The VUR-59GR is adjustable in height, depth, and angle, and can be reconfigured to support documents ranging in size from envelopes to 8.5" x 11 papers.

Note: The 59GR does not easily accommodate legal-sized or larger papers, and is not designed as a writing surface.

The Freedom Stand Monitor Riser and Document Holder provides 2" of additional elevation for monitors. The large surface area is sufficient to support the majority of monitor bases. The basic Freedom Stand , Model VUR-1776-PH,does not include the document holder clip and serves only as a monitor riser. Model VUR-1776-PHL includes an angle-adjustable document holder clip that can be mounted for either left or right hand use and thus serves as both a monitor riser and a document holder.

The VuRyte LapRyser offers better positioning of your laptop computer. Height settings are 1.25" and 2.5". The accompanying Liberator Document Holder can be mounted either right or left to keep your documents readily available and freely pivots out of the way as required. Cable clutter is kept to a minimum with convenient cable routing and clips with ventilation openings to reduce heat buildup.

This economical document holder is a compact, reconfigurable accessory that can accommodate up to an 8.5" x 11" piece of paper when using the flip up wire 'loop'. It is more suitable for smaller documents and the easel doubles as a clear dry erase surface. The document holder will extend 3" below the worksurface; please note however as the unit is lightweight there is minimal counterbalance when being used as a writing surface.