The R-Go Compact Break Ergonomic Keyboard (available in Wired or Bluetooth models) eliminates the need to reach out and over a numeric keypad and navigation keys when reaching for a mouse on the right, addressing a common source of discomfort and pain. At just 11.2" in width this keyboard has a minimal footprint that will work on any desk or keyboard tray. The compact design is suitable for both left- and right-handed typists who wish to keep their mouse close at hand. The exceptionally thin (9 mm) profile of the Compact Break Keyboard also greatly reduces the potential of developing RSI related to wrist extension. The usage-monitoring Break software offers a colour-changing logo to remind typists to take breaks to move, stretch, and ease their eyes.

The R-Go Compact Break Keyboard features low-travel scissor switch membrane key switches with chiclet-style keycaps. Key spacing is standard and all primary keys are full-size, reducing adaptation time to a minimum. Typists who are looking for an easily portable keyboard may want to consider this keyboard. The ultra-compact design and just 310 gram weight of the R-Go Compact Break Ergonomic Keyboard make it highly suited for travel applications. The Wired model is equipped with a USB-C connection but ships with an adapter for use with USB-A ports, while the Bluetooth model offers a wireless connection to Bluetooth-enabled devices.

The R-Go Compact Break Ergonomic Keyboard does not include an embedded numeric keypad. Numeric entry must be completed either using the standard keyboard upper rank numeric keys or a stand-alone numeric keypad can be purchased. The R-Go Numpad Break is an ideal matching accessory keypad, with both Wired and Bluetooth models available. The wired model can be plugged directly into either the left or right side of the R-Go Compact Break Keyboard or into any standard USB port, and, of course, the Bluetooth model connects to Bluetooth-enabled devices.

For those who like the low profile of the R-GO Compact Break but may be looking to address the ergonomics of their workstation to an even greater degree, the R-Go Split Ergonomic Keyboard, available in both Wired and Bluetooth models offers the options of either a one-piece keyboard or of spreading the keyboard halves apart to gain additional ergonomic benefits.

The R-Go Caparo 4 D2 Single Monitor Arm from R-Go Tools is an articulating (gas-cylinder) desk-clamp arm for single monitors. It has a hinged arm for a horizontal extension of 8" to 23" (20 - 59 cm) with a height range of 6.3" to 25.2" (16 - 64 cm), a tilt range of 40°, rotation of 360°, and swivel range of 180°. The monitor mounts to the arm using a 75x75 mm and 100x100 mm VESA plate. The Caparo 4 D2 can handle monitor weights from 6.6 to 19.8 lbs (3 - 9 kg).

The Caparo 4 D2 Single Monitor Arm uses three "Smart" technologies in its design. The Smart Lock feature allows attachment of the monitor to the arm with one click. The Smart Connect feature connects all modules together without tools and in an intuitive way. The Smart Stop feature secures the rotation of the arm in a certain direction with the rotation stop. In addition, the arm is certified to be 100% circular*.

*Note: "100% circular" means modules can be re-used with a life-time take back guarantee, the product is certified 100% recyclable, 75% of the aluminum is recycled raw material, materials are easily separable using smart-fits, and product boxing is 100% carton packaging material. Due to the cost of returning these to the manufacturer it may be more practical to direct them to a local recycler

The R-Go Riser Flexible Laptop Stand from R-Go Tools is a highly portable stand that can be used to elevate laptop screens for improved viewing ergonomics. The R-Go Riser is constructed of lightweight aluminum composite for ease of transport, with the entire unit compacting down to just 3 mm in thickness. Folding and unfolding the stand can be completed in just seconds, making it ideal for on-the-go use. The 5 available settings can accommodate personal preferences for screen height, elevating an average laptop screen from 4.5" to 7.5" above the surface (will vary with laptop dimensions). Raising the screen greatly reduces the downward bend in the neck and/or torso that is required when a laptop is placed directly on a desk or table.

Note: This stand is designed to be used with an external keyboard and mouse.

The R-Go Zepher 4 C2 Dual Monitor Arm from R-Go Tools is a desk-clamp arm for dual monitors. It has a hinged arm for vertical extension 8" to 22" (20 - 56 cm) with a height range of 11.5" to 19.5" (29 - 50 cm), a tilt range of 40°, rotation of 360°, and swivel range of 180°. The monitors mount to each arm using a 75x75 mm and 100x100 mm VESA plate. The Zepher 4 C2 Dual can handle weights from 0 to 17.6 lbs (8 kg) for each monitor.

The Zepher 4 C2 Dual Monitor Arm uses three "Smart" technologies in its design. The Smart Lock feature allows attachment of the monitor to the arm with one click. The Smart Connect feature connects all modules together without tools and in an intuitive way. The Smart Stop feature secures the rotation of the arm in a certain direction with the rotation stop. In addition, the arm is certified to be 100% circular*.

Note: "100% circular" means modules can be re-used with a life-time take back guarantee, the product is certified 100% recyclable, 75% of the aluminium is recyled raw material, materials are easily separable using smart-fits, and product boxing is 100% carton packaging material. Due to the cost of returning these to the manufacturer it may be more practical to direct them to a local recycler.

The R-Go Caparo 4 D2 Dual Monitor Arm from R-Go Tools is an articulating (gas-cylinder) desk-clamp arm for two monitors. It has a dual hinged arms for horizontal extension from 8" to 23" (20 - 59 cm) with a height range of 6.3" to 25.2" (16 - 64 cm), a tilt range of 40°, rotation of 360°, and swivel range of 180°. The monitors mount to the arms using a 75x75 mm and 100x100 mm VESA plate. The Caparo 4 D2 can handle monitor weights from 6.6 to 19.8 lbs (3 - 9 kg).

The Caparo 4 D2 Dual Monitor Arm uses three "Smart" technologies in its design. The Smart Lock feature allows attachment of the monitor to the arm with one click. The Smart Connect feature connects all modules together without tools and in an intuitive way. The Smart Stop feature secures the rotation of the arm in a certain direction with the rotation stop. In addition, the arm is certified to be 100% circular*.

Note: "100% circular" means modules can be re-used with a life-time take back guarantee, the product is certified 100% recyclable, 75% of the aluminum is recyled raw material, materials are easily separable using smart-fits, and product boxing is 100% carton packaging material. Due to the cost of returning these to the manufacturer it may be more practical to direct them to a local recycler.