The Winston Workstation Single from Innovative is a height-adjustable sit-stand add-on unit that can be deployed on almost any standard height fixed desk, converting it for sitting, leaning or standing. This all-in-one unit can elevate a keyboard, mouse, and other desk accessories, including a single monitor, to whatever standing height is needed (up to 18.0" above desk height for the keyboard platform; up to 37.6" above desk height to the middle of the monitor).

The keyboard platform (30" W x 23" D) and monitor mount move as one unit for height adjustment* to ensure that the monitor is appropriately positioned as working positions change throughout the day. The Winston uses a heavy metal base to stabilize the unit so that it can be positioned anywhere on the surface without having to clamp or bolt it to the desk. The release lever built into the keyboard platform on the right side, releases the lock so the platform, supported by a gas spring, can be moved up or down as desired with minimal effort.

*NOTE: The monitor height relative to the keyboard platform is set when the unit is assembled and is not intended to be adjusted on-the-fly while in use. However, should such a change be required, it can be readjusted by disassembling the monitor clamp and reassembling at a different height.

Le Winston Workstation Single d`Innovative est un produit assis-debout réglable en hauteur qui transforme presque n'importe quel bureau assis-seulement en bureau assis-debout. Cette unité tout-en-un permet d'élever un clavier, une souris ou d`autres accessoires de bureau, y compris un seul moniteur, à la hauteur nécessaire pour se tenir debout (jusqu`à 17po au-dessus du bureau pour la plateforme du clavier; et jusqu`à 40po au dessus du bureau à partir du milieu du moniteur).

La plateforme du clavier (30po Largeur x 18po Profondeur) et le support de l'écran (100 x 100 mm compatible avec VESA) se déplace ensemble en un morceau pour l`ajustement de la hauteur* pour assurer une hauteur optimale, que ça soit pour assis ou debout. Le Winston utilise une base en métal lourd pour stabiliser l'unité de manière à ce qu'elle puisse être positionnée n'importe où sur le bureau sans avoir besoin de la faire fixer à pince ou avec boulon. Il y a également un mécanisme de dégagement intégré dans la plateforme du clavier sur le côté droit, qui libère un verrou, de sorte que la plateforme peut ensuite être déplacée sans effort vers le haut ou vers le bas, selon les besoins.

*Veuillez noter: La hauteur du moniteur par rapport à la plateforme du clavier est ajuster lorsque l`unité est assemblée. Il n`est pas conçu à être ajustée vite fait, sans effort, pendant l`utilisation. Elle peut être réajustée en démontant la pince du moniteur et en la remontant à la hauteur nécessaire.

Mount one or two LCD monitors on the supplied pole with this space-saving mount. Position each monitor independently of the other, and quickly adjust pivot and tilt as your needs change. Set height at any desired position along the included 12" (30.5 cm) or 28" (71.1 cm) pole.

A Universal Mount with 6 mounting options is included. Weight capacity is up to 30 lbs (13.6 kg) per arm and each monitor can adjust independently. The arm is equipped with a 100 mm VESA Quick-Release adapter.

The Laptop Holder from HAT Innovative is capable of securely holding most laptops and tablets (with or without cases) at a more ergonomic viewing height/position when used with a compatible monitor arm. As it also lifts the laptop or tablet clear of the desk it can open up space for documents or devices. This highly-adaptable holder can be mounted to any 100mmm VESA mount and is also equipped with a Quick Release adapter that fits the 7500 Wing Dual Monitor Arm. Adjustable arms on the sides can open or close to accommodate a very wide range of device dimensions. The four clamps (one on each side arm and two on the bottom rail) are also able to slide along the arms and rail to give access to ports at any point. These clamps are also equipped with a ratchet mechanism that can accommodate devices up to 1.125" in thickness. The open-top design lets the laptop or tablet device be easily removed and replaced once initial setup is completed. An ideal partner arm for many desk applications would be the PROXIMA Lateral Monitor Arm which offers almost effortless articulation for screen adjustment.

NOTE: The 1.25 pound weight should be added to the laptop weight when determining the total weight load for monitor arm selection.

Mount 2 flat panels side by side with this space-saving mount. Position each monitor independently of the other, and quickly adjust pivot and placement as your needs change. Set height at any desired position along the included 12" (30.5 cm) pole. The D-28 model provides a 28" (71.1 cm) pole and will accommodate 4 LCD monitors (creating a 2x2 grid).

A Universal Mount with 6 mounting options is included. This arm provides 200° of rotation at two pivot points and its space saving design allows approximately 3" (7.6 cm) of space behind the monitor. A friction control system provides smooth adjustment while adjusting the position of the arm.

Weight capacity is up to 22 lbs (9.98 kg) per arm and each monitor can adjust independently. The arm is VESA-monitor compatible - 75mm & 100mm VESA adapters included.

This sturdy large keyboard platform from Innovative has room for keyboard and mouse. It is adaptable for left- or right-handed users, and requires the 8131 Keyboard Adapter.

Note: This accessory weighs 10 lbs and should be taken into account when calculating total weight the arm will accommodate.

Manufacturer recommends special ordering the 1000HY version of the 7500 with this product for extra stability.

The Pole Clamp for LCD Monitors from Innovative is perfect for dental offices, kiosks and retail environments - anyplace you need to mount a monitor with minimal footprint. This clamp (model 9170) allows you to mount your flat panel monitor to a pole via a handy pole clamp. The monitor may be quickly tilted and turned, allowing for easy repositioning. Mount works for poles of 1.5", 1.75" and 2.0" (3.8 cm, 4.4 cm, and 5.1 cm)diameter.

The LCD Ceiling Mount from Innovative securely mounts a monitor from a fixed ceiling position. Perfect for POS/POP, retail and healthcare applications, Innovative's flexible pivoting mount allows for quick adjustment of monitor angle and rotation. Also, this arm can be fixed at ± 90° from perpendicular to ground for installation flexibility (it may even be positioned parallel to floor), and comes with internal cable management - simply route cables through tube. The mount handles monitors up to 45 lbs.

The EURO Series - Dual Monitor Pole Mount from Innovative LCD Arm features dual articulating arms which can be adjusted vertically through an 8" range along the 12" support pole. Both arms can fold up to fit in about 3" of space for back-to-back applications and extend out to provide 13.4" of extension from the support pole. For side-by-side viewing there is enough lateral extension to accommodate most 24" diagonal monitors. Cable clips and internal channels in each arm allow cables to be positioned to move with the arms. The Euro Series pole features eight notches at 1" increments which will provide a solid positive connection to position and secure the sliding adjustment clip. This clip prevents the arm extensions from sliding down, securely fastening the extension at the desired height.

The Dual Monitor Pole Mount comes with VESA plates to accommodate both 75mm and 100mm patterns. Monitors can be rotated between Portrait and Landscape modes, can pan fully left and right, and can tilt up to 190°.

The Winston Workstation Dual from Innovative is a height-adjustable sit-stand add-on unit that can be deployed on almost any standard height fixed desk, converting it for sitting, leaning or standing. This all-in-one unit can elevate a keyboard, mouse, and other desk accessories, including two monitors, to whatever standing height is needed (up to 18.0" above desk height for the keyboard platform; up to 37.6" above desk height to the middle of the monitor).

The keyboard platform (30" W x 23" D) and monitor mount (100 x 100 mm VESA compatible) move as one unit for height adjustment* to ensure that the monitors are appropriately positioned as working positions change throughout the day. The Winston uses a heavy metal base to stabilize the unit so that it can be positioned anywhere on the surface without having to clamp or bolt it to the desk. The release lever built into the keyboard platform on the right side releases the lock so the platform, supported by a gas spring, can be moved up or down as desired with minimal effort.

Single, Triple and Quad units are also available.

*NOTE: The monitor height relative to the keyboard platform is set when the unit is assembled and is not intended to be adjusted on-the-fly while in use. However, should such a change be required, it can be readjusted by disassembling the monitor bar clamp and reassembling at a different height.

Le Winston Workstation Dual d`Innovative est un produit assis-debout réglable en hauteur qui transforme presque n'importe quel bureau assis-seulement en bureau assis-debout. Cette unité tout-en-un permet d'élever un clavier, une souris ou d`autres accessoires de bureau, y compris deux moniteurs, à la hauteur nécessaire pour se tenir debout (jusqu`à 17po au-dessus du bureau pour la plateforme du clavier; et jusqu`à 40po au dessus du bureau à partir du milieu du moniteur).

La plateforme du clavier (30po Largeur x 18po Profondeur) et le support de l'écran (100 x 100 mm compatible avec VESA) se déplace ensemble en un morceau pour l`ajustement de la hauteur* optimale, que ça soit pour assis ou debout. Le Winston utilise une base en métal lourd pour stabiliser l'unité de manière à ce qu'elle puisse être positionnée n'importe où sur le bureau sans avoir besoin de la faire fixer à pince ou avec boulon. Il y a également un mécanisme de dégagement intégré dans la plateforme du clavier sur le côté droit, qui libère un verrou, de sorte que la plateforme peut ensuite être déplacée sans effort vers le haut ou vers le bas, selon les besoins.

Les modèles Single (pour un moniteur), Triple (pour trois) et Quad (pour quatre) sont aussi disponibles.

*Veuillez noter: La hauteur du moniteur par rapport à la plateforme du clavier est réglée lorsque l`unité est assemblée. Il n`est pas conçu à être ajustée vite fait, sans effort, pendant l`utilisation. Elle peut être réajustée en démontant la pince du moniteur et en la remontant à la hauteur nécessaire.

The Winston-E Workstation Dual from Innovative is a motorized height-adjustable sit-stand add-on unit that can be deployed on almost any standard height fixed desk, converting it for sitting, leaning or standing. This all-in-one unit will raise a keyboard, mouse, or other desk accessories, including two monitors, to whatever standing height is required (up to 18.4" above desk height for the keyboard platform; up to 37.6" above desk height to the middle of the monitor).

The Winston-E height is adjusted with the touch of a button and offers the option of programming the height-adjustment range so that the same standing height is always achieved. The keyboard platform (30" W x 18" D) and monitor mount (100 x 100 mm VESA compatible) move as one unit for height adjustment*. The monitor mounts also permit focal depth adjustment to ensure that monitors are appropriately positioned. These multiple adjustment mechanisms allow for the best ergonomic positioning of monitors.

The keyboard platform for the Standard unit is 30" wide by 22.0" deep, while for the Compact unit is 30" wide by 16.0" deep. All versions of the Winston-E include a heavy metal base to stabilize the unit so that it can be positioned anywhere on the desk surface without having to clamp or bolt it to the desk.

Single and Triple units are also available. Call for details.
*NOTE:The monitor height relative to the keyboard platform can be adjusted by loosening the lock wheel on the monitor mounts and moving the monitors to the desired heights.