The Eureka Sit-Stand Desktop Single Arm from Eureka Ergonomic converts a fixed-height desk into a height-adjustable sit-stand desk. It is free-standing (no clamping required) and easily moved to any position on the desk. A single hand-operated release permits infinite keyboard height adjustment to any point from 0.75" - 11.75" above the mounting surface. If mounted on a 29.5" high surface this will provide a standing height suited to those up to 5'8" to 5'9". Taller indivduals should consider other options that offer greater elevation. The upper worksurface where the display is mounted and the keyboard tray move in concert, maintaining a 5.75" difference between the two levels. In order to minimize the physical demands, adjustment is assisted by a gas spring rated up to a maximum combined rating of 30 lbs (5 on keyboard tray, 25 on worksurface). Cherry woodgrain finish and Black accents add a finishing touch to this sit-stand desk solution.

The keyboard tray features an 11" deep x 26" wide primary section that provides space for a full size keyboard and average mouse. If using a compact keyboard there is plenty of space for some speciality ergonomic mice that have larger footprints. Shallower 5.5" deep x 2.25" wide "wings" extend on both left and right sides and may provide some additional usable space for a standard mouse.

The upper worksurface is 20" deep and tapers from 31.5" W at the front to 27" at the rear. It will easily accommodate a large single monitor and may be able to support dual monitors mounted on a monitor arm (if the combined weight does not exceed the 25 lb. maximum rating. The surface provides space for multiple documents to be kept available.

The Eureka Sit-Stand Desktop Single Arm can be deployed on desks as shallow as 23". With the base at the front edge of the desk the keyboard tray will project approximately 10" when in the seated position, and about 5.5" when at the highest. On deeper desks the unit could be positioned further back to minimize the projection beyond the desk surface to just 4.5" when in the seated position.

The Eureka Single Monitor Arm from Eureka Ergonomic is suited to monitors ranging from 5 to 20 lbs. Constructed of cast aluminum, this arm uses a gas spring mechanism for elevation support and offers 3 articulation points for smooth movement in all directions. 180° range of both pan and tilt ensure that the monitor can be adjusted to whatever position is ideal. It provides 13.5” of vertical range (6.75" - 20.25") and a maximum horizontal extension of 24.0” (from back of monitor mount to VESA plate). The lower arm is fixed at a 45° angle, ensuring that arm movement is not obstructed by other items on the desktop. A simple screw adjustment lets tension be adjusted to support monitors weighing up to 20 lbs. Cables are kept neatly stored in the underside of the arm. A Quick Connect Adapter simplifies mounting and swapping monitors when needed.

The Eureka Executive Swing Chair from Eureka Ergonomic merges new aesthetics and production technology with the proven design of the patented ErgoMotion mechanism. The Eureka may look different on the outside but beneath the new look is the same counterbalance mechanism design that put earlier SwingSeat and SwingChair models in a class by themselves. The seat, backrest and headrest of the Executive Swing Chair are upholstered in leather for a luxurious look and feel. The stylistic polished aluminum base further enhances the aesthetics of this seat.

The seat and backrest of the Eureka Executive Swing Chair sense the position of the body and adjust independently to provide perfectly aligned support that effortlessly shifts and synchronizes with the user as they move throughout the day. No longer do users have to adjust their chair as they change position—rather, the chair automatically makes necessary adjustments based on the movement of the user. Regardless of whether the user is leaning back to relax, forward to answer the phone or just sitting working on the computer, the Eureka Swing Chair will be continuously adjusting to their every movement. The patented counterbalancing tilt mechanism ensures that the lumbar support remains in perfect alignment as you move throughout the day.

Because the Eureka Swing Chair adapts to the user—once the seat height, backrest depth and backrest tension are set most users will never need to adjust their chair again—the ErgoMotion mechanism takes care of that. With the natural rhythmic movement of the body restored, the user is able to fully focus on their work not on how to adjust their chair to be more comfortable.

The Eureka Swing Chair is also available in a Task Back version with Fabric upholstery and black nylon base.

La chaise Eureka Executive Swing Chair de Eureka Ergonomic rejoind une nouvelle esthétique et une nouvelle technologie de production avec la conception éprouvée du mécanisme breveté ErgoMotion. L'Eureka peut sembler différente à l'extérieur, mais elle à le même mécanisme de contrepoids qui met les modèles SwingSeat et SwingChair dans une classe unique à part. L'assise, le dossier et l'appuie-tête de la chaise Executive Swing sont rembourrés en cuir pour un aspect et une sensation luxueux. La base stylisée en aluminium brillante améliore encore l'esthétique de cette chaise.

Le siège et le dossier de la chaise Eureka Executive Swing Chair détectent la position du corps et s'adaptent de manière indépendante pour fournir un support parfaitement aligné qui se déplace et se synchronise sans effort avec l'utilisateur pendant toute la journée. Les utilisateurs n'ont plus besoin d'ajuster leur chaise lorsqu'ils changent de position. Plutôt, la chaise fait les ajustements nécessaires automatiquement selon le mouvement de l'utilisateur. Peu importe si l'utilisateur se penche en arrière pour se détendre, avancer pour répondre au téléphone ou simplement s'asseoir en travaillant sur l'ordinateur, la chaise Eureka Executive Swing Chair s'adapte continuellement à chaque mouvement. Le mécanisme breveté d'inclinaison du contrepoids assure que le support lombaire reste parfaitement aligné lorsque l`utilisateur se déplace tout au long de la journée.

Parce que la chaise Eureka Executive Swing Chair s'adapte à l'utilisateur—une fois la hauteur du siège, la profondeur du dossier et la tension du dossier sont établis, la plupart des utilisateurs n'auront plus besoin d'ajuster leur chaise—le mécanisme ErgoMotion prend soin de cela. Avec le mouvement rythmique naturel du corps rétablie, l'utilisateur est en mesure de se concentrer pleinement sur leur travail et non sur la façon d'ajuster leur chaise pour être plus à l'aise.

La chaise Eureka Executive Swing Chair est également disponible en version Task Back avec une tapisserie en matériau et une base en nylon noir.

The Eureka Standing Desk Converter 36 from Eureka Ergonomic converts a fixed-height desk into a height-adjustable sit-stand "desk". With a full 36" width of upper surface there is plenty of space for documents and materials to be kept readily accessible. It is free-standing (no clamping required) and can be moved between locations without disassembly. Dual hand-operated releases permit infinite keyboard height adjustment to any point from 1.125" - 15.75" above the mounting surface. If mounted on a 29.5" high surface this will provide a standing height suited to users up to well over six feet tall. The upper worksurface and the keyboard tray move in concert, maintaining a 4.25" difference between the two levels. In order to minimize the physical demands upon the user, adjustment is assisted by a gas spring rated up to a maximum combined rating of 35 lbs (5 on keyboard tray, 30 on worksurface). Ready-to-use out of the box, the Eureka Standing Desk Converter 36 is available in a rich Cherry finish.

The keyboard tray features left and right mousing areas that are 9.4" deep x 8.3" wide with enough space (over 19") between them to accommodate a full-size keyboard. The central portion of the tray is 14" deep, enough to accommodate a keyboard and central pointing device or a laptop. A slot at the rear of the keyboard tray serves to keep a phone or tablet viewable and accessible at all times when using a keyboard.

The upper worksurface is 15.75" deep in the middle (see dimension image in the image gallery) with left and right 6.25" W areas that extend forward another 6.25" to provide additional space for documents, phone or gaming devices.The large surface can support dual monitors up to 24" diagonal placed directly on the worksurface or up to 30" diagonal when deployed using clamp mount monitor arms to provide greater adjustment.

Note: The The Eureka Standing Desk Converter 36 will NOT fit on a 24" desk unless there is at least 1.5" of clearance behind the desk. When the Eureka Standing Desk Converter 36 is at its lowest setting the upper worksurface extends 1.375 inches back beyond the base, making it best suited to installation on surfaces at least 30" in depth or where there is sufficient clearance behind the base. At the lowest setting the overall depth of the unit is 32.5" so even on a 30" deep desk the front edges of the tray will extend out about 2.5". When the unit is raised it cantilevers forward towards the user as it rises, to an overall depth of 38.375" at the highest setting, extending about 8.5" out from the front of a 30" deep mounting surface.

The Eureka Sit-Stand Desktop 46 from Eureka Ergonomic converts a fixed-height desk into a height-adjustable sit-stand "desk". Unlike smaller desktop units this 46" wide really does convert an entire desk. It is free-standing (no clamping required) and can be moved between locations without disassembly. Dual hand-operated releases permit infinite keyboard height adjustment to any point from 1.125" - 15.75" above the mounting surface. If mounted on a 29.5" high surface this will provide a standing height suited to users up to well over six feet tall. The upper worksurface and the keyboard tray move in concert, maintaining a 4.25" difference between the two levels. In order to minimize the physical demands upon the user, adjustment is assisted by a gas springs rated up to a maximum combined rating of 35 lbs (5 on keyboard tray, 30 on worksurface). Ready-to-use out of the box, the Sit-Stand Desktop 46 is available in a professional Black finish with Cobalt Blue trim adding a finishing touch.

The keyboard tray features large 10" x 10" mousing areas on both right and left sides with enough space (19") between them to accommodate a full-size keyboard. The central portion of the tray is 14" deep and able to accommodate a laptop if desired. A slot at the rear of the keyboard tray serves to keep the largest of tablets viewable and accessible at all times when using a keyboard.

The expansive upper worksurface is 19" deep in the middle (see dimension image in the image gallery) with left and right zones that extend forward another 4.75" to provide additional space for documents, phone or gaming devices. The angular top reaches a maximum width of 46" and tapers back to 29" at the rear. With these dimensions this is one of the largest desktop sit-stand units available.The large surface can support dual monitors up to 32" diagonal, placed directly on the worksurface or deployed using clamp mount monitor arms to provide greater adjustment.

Note: The Eureka Sit-Stand Desktop 46 will NOT fit on a 24" desk unless there is at least 1.5" of clearance behind the desk. When the Eureka Sit-Stand Desktop 46 is at its lowest setting the upper worksurface extends 1.375 inches back beyond the base, making it best suited to installation on surfaces at least 30" in depth or where there is sufficient clearance behind the base. At the lowest setting the overall depth of the unit is 34.25" so even on a 30" deep desk the front edges of the tray will extend out about 4.5". When the unit is raised it cantilevers forward towards the user as it rises, to an overall depth of 41.5" at the highest setting, extending about 12" out from the front of a 30" deep mounting surface.

The Eureka Swing Chair from Eureka Ergonomic merges new aesthetics and production technology with the proven design of the patented ErgoMotion mechanism. The Eureka may look different on the outside but beneath the new look is the same counterbalance mechanism design that put earlier SwingSeat and SwingChair models in a class by themselves.

The seat and backrest of the Eureka Swing Chair sense the position of the body and adjust independently to provide perfectly aligned support that effortlessly shifts and synchronizes with the user as they move throughout the day. No longer do users have to adjust their chair as they change position—rather, the chair automatically makes necessary adjustments based on the movement of the user. Regardless of whether the user is leaning back to relax, forward to answer the phone or just sitting working on the computer, the Eureka Swing Chair will be continuously adjusting to their every movement. The patented counterbalancing tilt mechanism ensures that the lumbar support remains in perfect alignment as you move throughout the day.

Because the Eureka Swing Chair adapts to the user—once the seat height, backrest depth and backrest tension are set most users will never need to adjust their chair again—the ErgoMotion mechanism takes care of that. With the natural rhythmic movement of the body restored, the user is able to fully focus on their work not on how to adjust their chair to be more comfortable.

The Eureka Swing Chair is also available in a Executive version with Leather upholstery, headrest, and polished aluminum base.

La chaise Eureka Swing Chair de Eureka Ergonomic rejoind une nouvelle esthétique et une nouvelle technologie de production avec la conception éprouvée du mécanisme breveté ErgoMotion. L'Eureka peut sembler différente à l'extérieur, mais elle à le même mécanisme de contrepoids qui met les modèles SwingSeat et SwingChair dans une classe unique à part.

Le siège et le dossier de la chaise Eureka Swing Chair détectent la position du corps et s'adaptent de manière indépendante pour fournir un support parfaitement aligné qui se déplace et se synchronise sans effort avec l'utilisateur pendant toute la journée. Les utilisateurs n'ont plus besoin d'ajuster leur chaise lorsqu'ils changent de position. Plutôt, la chaise fait les ajustements nécessaires automatiquement selon le mouvement de l'utilisateur. Peu importe si l'utilisateur se penche en arrière pour se détendre, avancer pour répondre au téléphone ou simplement s'asseoir en travaillant sur l'ordinateur, la chaise Eureka Swing Chair s'adapte continuellement à chaque mouvement. Le mécanisme breveté d'inclinaison du contrepoids assure que le support lombaire reste parfaitement aligné lorsque l`utilisateur se déplace tout au long de la journée.

Parce que la chaise Eureka Swing Chair s'adapte à l'utilisateur—une fois la hauteur du siège, la profondeur du dossier et la tension du dossier sont établis, la plupart des utilisateurs n'auront plus besoin d'ajuster leur chaise—le mécanisme ErgoMotion prend soin de cela. Avec le mouvement rythmique naturel du corps rétablie, l'utilisateur est en mesure de se concentrer pleinement sur leur travail et non sur la façon d'ajuster leur chaise pour être plus à l'aise.

La chaise Eureka Swing Chair est également disponible dans une version Executive avec la tapisserie en cuir, l'appui-tête, et la base en aluminium brillante.