The DIADEM Return Table Tops from ErgoVerse are intended as companion tops for the DIADEM Waterfall Table Tops. When added to a DIADEM Waterfall Table Top the combination of the two creates a traditional L-shaped desk with a 29" deep primary section ...
The DIADEM Return Table Tops from ErgoVerse are intended as companion tops for the DIADEM Waterfall Table Tops. When added to a DIADEM Waterfall Table Top the combination of the two creates a traditional L-shaped desk with a 29" deep primary section and a 23" deep return. The DIADEM Return Table Tops can also serve as a stand-alone desk surface for those with less room. The DIADEM Return Table Tops retain the same focus on functional organic form and distinctive look as do the DIADEM Waterfall Table Tops. Constructed of 1" thick MDF core, these table tops have an elegant waterfall profile and rounded corners that eliminate pinch points and sharp edges. Highly resilient laminate film is then applied to the tops using 3-D lamination technology. This combination of high heat and vacuum wrap the lamination film around the contoured edges, resulting in a fully sealed top. The satin finish laminate film is non-porous, providing protection from spills and the fully sealed contoured edges offer full protection to the MDF core. The undersides of all DIADEM Return Table Tops are finished with melamine to add further protection.
DIADEM Return Table Tops are 23" deep and available in 2 widths (41" and 53"). Both sizes are available in the same 6 colours - 4 luxurious wood grain finishes (Dark Crimson Mahogany, Autumn Harvest Cherry, Light Fresh Maple, and Pristine Sandbank) and 2 solid colours (Black and Grey) as the DIADEM Waterfall Table Tops.
Les DIADEM Return Table Tops d'ErgoVerse sont conçus pour être complémentaires pour les dessus de table DIADEM Waterfall Table Tops. Lorsqu'il est ajouté à un dessus de table DIADEM Waterfall Table Top, la combinaison des deux crée un bureau traditionnel en forme de L avec une section primaire 29po de profondeur et un retour 23po de profondeur. Les DIADEM Return Table Tops peuvent également servir de surface de bureau indépendant pour ceux qui ont moins d'espace. Les DIADEM Return Table Tops conservent le même accent sur la forme fonctionnelle et l'aspect distinctive que les DIADEM Waterfall Table Tops. Ces dessus de table (table top) sont construits de MDF core d'un pouce épais, et sont usinés avec un profil de cascade élégant et des coins arrondis qui éliminent les points de pincement. Un film robuste de stratifiés haute pression est ensuite appliqué sur les dessus de table en utilisant la technologie de laminage en 3-D. Cette combinaison de chaleur élevée et d'enveloppement sous vide le film de laminage autour des coins arrondis, ce qui donne un dessus de table qui est complètement refermé. Le film avec finition satiné laminé est non poreux, offrant une protection contre les déversements et les coins arrondis entièrement refermé offrant une protection complète au MDF core. Les dessous de toute les tables DIADEM Return Table Tops sont finis avec de la mélamine pour ajouter encore plus de protection.
Les DIADEM Return Table Tops sont de 23po de profondeur et sont disponibles en 2 largeurs (41po et 53po). Les deux tailles sont disponibles en 6 couleurs - 4 finitions de grains de bois luxueuses (Acajou foncé, Cerise d'automne, Érable léger, et Pristine Sandbank) ainsi que 2 couleurs solides (Noir et Gris) comme les DIADEM Waterfall Table Tops.
Models
Model #
Description
Price
In Stock?
Buy Now
DRT-4123-BLK
41" wide x 23" deep x 1" thick, Solid Black
$157.50
Yes
DRT-4123-GRY
41" wide x 23" deep x 1" thick, Solid Grey
$157.50
Yes
DRT-4123-CHE
41" wide x 23" deep x 1" thick, Autumn Harvest Cherry
$162.50
Yes
DRT-4123-MAH
41" wide x 23" deep x 1" thick, Dark Crimson Mahogany
$162.50
Yes
DRT-4123-MAP
41" wide x 23" deep x 1" thick, Light Fresh Maple
$162.50
Yes
DRT-4123-SAN
41" wide x 23" deep x 1" thick, Pristine Sandbank
$162.50
Yes
DRT-5323-BLK
53" wide x 23" deep x 1" thick, Solid Black
$202.50
Yes
DRT-5323-GRY
53" wide x 23" deep x 1" thick, Solid Grey
$202.50
Yes
DRT-5323-CHE
53" wide x 23" deep x 1" thick, Autumn Harvest Cherry
$205.00
Yes
DRT-5323-MAH
53" wide x 23" deep x 1" thick, Dark Crimson Mahogany
$205.00
Yes
DRT-5323-MAP
53" wide x 23" deep x 1" thick, Light Fresh Maple
$205.00
Yes
DRT-5323-SAN
53" wide x 23" deep x 1" thick, Pristine Sandbank NO ETA.
$205.00
No
DRT-4123-SAN-CLEARANCE
41" wide x 23" deep x 1" thick, Pristine Sandbank - Clearance (product differs slightly from Diadem - ask for details) CLEARANCE.
$162.50
Yes
DRT-5323-GRY-CLEARANCE
53" wide x 23" deep x 1" thick, Solid Grey - Clearance (product differs slightly from Diadem - ask for details) CLEARANCE.
The CETUS CPU Holder from ErgoVerse is an ideal accessory for use with the ANDROMEDA Electric Workstation Base, clearing valuable desk space and creating a clutter-free environment. Suspending the CPU ensures that it moves with the desk as height is ...
The CETUS CPU Holder from ErgoVerse is an ideal accessory for use with the ANDROMEDA Electric Workstation Base, clearing valuable desk space and creating a clutter-free environment. Suspending the CPU ensures that it moves with the desk as height is adjusted, eliminating the need for cable extensions or the risk of items being pulled off of the desk because cables are too short to reach from the floor. Of course, the CETUS can also be just as useful with any other height adjustable or fixed height desk.
The CETUS CPU Holder features sturdy steel construction and ease of adjustment to support CPUs weighing up to 50 lbs. It is able to accommodate CPUs ranging from 3.1" to 8.6" in width, and from 12.8" to 21.8" in height. A spring-loaded latch keeps the CPU fully secured in the holder but permits quick access if needed.
Le CETUS CPU Holder de ErgoVerse est un accessoire idéal pour l`ANDROMEDA Electric Workstation Base, en offrant une espace sans encombrement, ce qui donne plus d'espace précieux sur le bureau. Le CPU suspendu assure qu'il bouge avec le bureau quand la hauteur est ajuster, ce qui elimine le besoin d'avoir des extentions de câbles ou d'avoir le risque que des objets tombent du bureau parce que les câbles sont trop court pour atteidre du sol. Certainement, le CETUS peut être aussi utiliser avec tout autre bureaux ajustable aussi que les bureaux à hauteur fixe.
Le structure robuste du CETUS CPU Holder est en acier et il est facile à ajuster pour supporter les CPUs qui pessent jusqu'à 50 livres. Il est compatible avec les CPUs entre 3.1po à 8.6po de largeur, et de 12.8po à 21.8po d'hauteur. Un verrou chargé en élasticité (spring-loaded latch) garde le CPU en tout sécuriter dans le support mais permet aussi l'accès vite fait, si nécessaire.
The EZSIT Leaning Stool from ErgoVerse is a sturdy leaning or sitting stool that offers a larger-than-average seating surface, combined with extra cushioning for superior comfort. Height adjustment is accomplished via a gas spring that also serves to ...
The EZSIT Leaning Stool from ErgoVerse is a sturdy leaning or sitting stool that offers a larger-than-average seating surface, combined with extra cushioning for superior comfort. Height adjustment is accomplished via a gas spring that also serves to absorb impact as one lowers themselves onto the seat.
The EZSIT Leaning Stool models were developed in response to client feedback about other options in sit-stand seating. Many found the seats and backs on other models too small and narrow, making those models uncomfortable for extended work sessions. The EZSIT Leaning Stool, with its increased cushioning and greater surface areas, can provide comfort and support to a full range of builds and sizes, especially for lengthy work sessions. The large 18.7" by 13" seat tilts from 0° to 15° to accommodate both sitting and leaning and generous padding provides support without sacrificing comfort. Models ELS-B-11122 and ELS-B-S-11128 include a matching, heavily padded and oversized back with a shallow curvature to accommodate broad-backed individuals. Independent angle adjustment on the back of these models ensures that a comfortable upright posture can be maintained regardless of the chosen seat angle.
Two ranges of seat height adjustment are available to provide seating options for people ranging in height from barely 5' tall to 6'6" tall. Those up to 5'9" tall should consider model numbers ELS-S-11128 or ELS-B-S-11129 (seat height adjustment ranges from 24" to 31"), while those who are between about 5'6" tall and 6'6" tall should consider model ELS-11122 or ELS-B-11123 (seat height adjustment ranges from 28" to 37").
Those who have adopted a leaning or semi-seated stance over either traditional seating or full-time standing may well appreciate the extra comfort offered by the EZSIT Leaning Stool.
Models
Model #
Description
Price
In Stock?
Buy Now
ELS-B-11122
EZSIT Leaning Stool with Back, Imitation Leather Over Foam, Seat Height Range of 28" - 37".
$555.00
Yes
ELS-11123
EZSIT Leaning Stool, Imitation Leather over Foam, Seat Height Range of 28" - 37".
$420.00
Yes
ELS-B-S-11128
EZSIT Leaning Stool with Back (short), Imitation Leather Over Foam, Seat Height Range of 24" - 31".
$555.00
No
ELS-S-11129
EZSIT Leaning Stool (short), Imitation Leather over Foam, Seat Height Range of 24" - 31".
KUMA ABS Low Profile Trays from ErgoVerse offer a low 0.375" thick profile that permits individuals to position their keyboard and mouse for optimal ergonomics.Constructed of durable ABS plastic, this simple design also eliminates any uncomfortable o ...
KUMA ABS Low Profile Trays from ErgoVerse offer a low 0.375" thick profile that permits individuals to position their keyboard and mouse for optimal ergonomics.Constructed of durable ABS plastic, this simple design also eliminates any uncomfortable obstructions on the underside of the tray. When placed on the KUMA ABS Plastic Low Profile Tray, especially one installed on a keyboard arm equipped with a slim mounting bracket (such as the Ovation Low Profile Leverless Arm) a keyboard and pointing device can be comfortably positioned just above the legs, and/or at a negative incline (tilted down) without restricting movement of the knees or thighs.
Note: To be sure this tray will fit an existing keyboard arm, please compare the mounting hole pattern on the installed arm with the Mounting Hole Pattern on the diagram.
The simple, clean design of the KUMA ABS Low Profile Tray is also free of obstructions on its upper surface, (such as raised edges or built-in wrist rests) that could increase the risk of injury to the sensitive pressure points on the underside of the wrists. The rear edge is raised to keep the keyboard in place when the tray is at a negative incline, and is notched in two places to accommodate cable routing.
Composed of rigid ABS Plastic, and 11 inches deep (from front to back), the KUMA ABS Low Profile Trays can accommodate specialty ergonomic keyboards (including adjustable or separated keyboards). These trays are currently available in widths of 30" & 27", with the 30" wide model wide enough for practically all keyboards and pointing devices.
Models
Model #
Description
Price
In Stock?
Buy Now
KKT-24x11
24" wide x 11" deep
$142.50
Yes
KKT-27x11
27" wide x 11" deep
$145.00
Yes
KKT-30x11
30" wide x 11" deep
$147.50
Yes
Accessories
Model #
Description
Price
In Stock?
Buy Now
FB-MP
Mouse Pad Accessory Dimensions: 7.75" D x 7.125" W Material: 0.125" thick rubber pad with lycra surface
With a seat height range of 23.75" - 33.1", the STEPL Drafting Chair from ErgoVerse can provide those working at fixed-height elevated workstations a stable and comfortable seat. The STEPL features a wide seat and back rest, both with 2" thick paddin ...
With a seat height range of 23.75" - 33.1", the STEPL Drafting Chair from ErgoVerse can provide those working at fixed-height elevated workstations a stable and comfortable seat. The STEPL features a wide seat and back rest, both with 2" thick padding for comfort. The angles of the seat and back rest are independently adjustable, with the back rest also adjustable in height, features that let each person to position support where it is most beneficial. Seat height adjustment is via a standard gas spring lift that also provides a shock-absorbing effect.
Two footrest options are available. Models SDC-BLK-05004 and SDC-GRY-07033 are equipped with a large 22.8" diameter heavy steel foot ring that provides a convenient 360° of fixed support for the feet. Model SDC-BLK-07030 features a 120° steel footrest with an aggressively treaded surface for safety. Both foot rest options can be positioned as low as 7.5" off the floor or can also be secured at greater heights if necessary.
All models have oversized 27" diameter Brushed Aluminum bases for stability. Safety glides ensure safety when mounting and dismounting from the chair.
STEPL Drafting chairs are upholstered with supple imitation leather. Model SDC-BLACK-05004 is available in Black, SDC-BLK-07033S is available in Anthracite Grey with red accent stitching, and Model DC-GRY-07030 is available in Black, with red accent stitching.
Models
Model #
Description
Price
In Stock?
Buy Now
SDC-BLK-05004
STEPL Drafting Chair, Black imitation leather, integrated fixed footring. regular price $930, sales price while quantities last $695 CLEARANCE.
$695.00
Yes
SDC-GRY-07033
STEPL Drafting Chair, Anthracite Grey imitation leather, integrated fixed footring. SPECIAL ORDER ONLY. NO ETA.
$950.00
No
SDC-BLK-07030
STEPL Drafting Chair, Black imitation leather, integrated fixed footrest. SPECIAL ORDER ONLY. NO ETA.
The PYRCH Saddle Seat from ErgoVerse encourages the adoption of a partially elevated upright stance that encourages more upper body activity, better and deeper breathing, and improved overall blood flow. This type of posture offers a greater range of ...
The PYRCH Saddle Seat from ErgoVerse encourages the adoption of a partially elevated upright stance that encourages more upper body activity, better and deeper breathing, and improved overall blood flow. This type of posture offers a greater range of reach and can also lead to a higher degree of alertness. The upright position also makes it easy to return to a fully standing position, reducing stress on the knees.
When seated on the PYRCH Saddle Seat, the legs are positioned in a wider stance than is possible on a leaning stool or standard chair. Because the saddle can be elevated to any height between 26" and 35.8" it can serve the needs of a wide range of individuals, even those working at elevated workstations. The saddle can also be tilted forward up to 15° and offers a full 360° of free rotation. This capacity for full rotation makes the PYRCH a practical solution for workers who may need to swivel between different work surfaces when accessing parts or equipment. When the seat pan is tilted the PYRCH can also provide a limited degree of leaning capability. The robust black tubular steel base provides strength and stability, with strong nylon glides that ensure secure positioning.
Note: Sitting on a saddle stool elevates the torso higher than a standard seat. Saddle stools are therefore not generally recommended as a replacement for seating at a standard office desk. Please call one of our Product Specialists to discuss your intended use of the PYRCH Saddle Seat. We will be happy to help you find the best solution for your needs.
Designed with musicians in mind, the EZ-RYZE SOLO Foot Rest from ErgoVerse offers virtually effortless adjustment of height for optimal performance posture. The hands-free height adjustment relies on a locking pressurized gas spring that provides upw ...
Designed with musicians in mind, the EZ-RYZE SOLO Foot Rest from ErgoVerse offers virtually effortless adjustment of height for optimal performance posture. The hands-free height adjustment relies on a locking pressurized gas spring that provides upward force. Once the lock release button is activated using a heel, the foot is used to counter the force of the spring and position the platform to the desired height before lifting the heel to lock the foot rest in at any point between 4.3" and 8.75".
The non-locking platform tilts freely between 3° and 20°, encouraging flexing of the feet and ankles during use. Arced ridges on the platform prevent the foot from slipping. The platform is formed from strong ABS Plastic with a sturdy steel frame and base providing stability and support. Large rubber feet on the base ensure secure positioning.
Caution: Non-locking footrests, such as the EZ-RYZE SOLO described here, are not recommended for use in a standing position.
Conçu pour répondre aux besoins des musiciens, l'EZ-RYZE SOLO Foot Rest d'ErgoVerse offre l'ajustement d'hauteur pratiquement sans effort pour une posture de performance optimale. L'ajustement en hauteur mains libres repose sur un ressort à gaz pressurisé verrouillable qui fournit une force vers le haut. Une fois le bouton de déverrouillage activé à l'aide d'un talon, le pied est utilisé pour contrer la force du ressort et positionner la plateforme à la hauteur désirée avant de soulever le talon pour verrouiller le repose-pieds à n'importe quel point entre 4.3po et 8.75po.
La plateforme non verrouillable peut être inclinée librement entre 3° et 20°, qui encourage la flexion des pieds et des chevilles durant l'usage. Les crêtes en arc sur la plateforme empêchent le pied de glisser. La plateforme est fait en plastique ABS résistant et d'un cadre et d'une base en acier solide qui assurent la stabilité et le soutien. Les grands pieds en caoutchouc de la base assurent un positionnement sécure.
Veuillez noter: Les repose-pieds Non Verrouillées, comme le EZ-RYZE SOLO décrit ici, ne sont pas recommendés pour l'usage dans une position debout.
The RISON Leaning Stools from ErgoVerse offer the options of sitting or leaning throughout the workday. The non-vertical, or leaning, stance effectively reduces the weight load on the joints of both the legs and the feet as the stool, rather than the ...
The RISON Leaning Stools from ErgoVerse offer the options of sitting or leaning throughout the workday. The non-vertical, or leaning, stance effectively reduces the weight load on the joints of both the legs and the feet as the stool, rather than the legs and feet, becomes the load bearing support. The upright position also significantly reduces the effort required to return to a fully standing position. The shock absorbing effect of the gas spring provides additional comfort when weight is brought to bear on the seat.
The fixed seat offers an infinitely adjustable height range via the gas spring and a forward-locking tilt adjustment ranging from 5° to 20°. The durable self-sealed polyurethane seat is easily cleaned and provides a firm yet cushioned seating surface with raised texture bumps for improved comfort. Model RLS-B-11120 also features a firm polyurethane back support with independent angle adjustment to ensure that a comfortable upright posture can be maintained regardless of the chosen seat angle. Note: The back on the RLS-B-11120 has a 2.5" deep curvature in the middle, is 14" wide, and has firm edges. Those with broader frames may find the back on this model too narrow and deep for a comfortable fit. The EZSIT Leaning Stool features a broader back better suited to those of broader build.
The heavy-duty textured black tubular steel base on the RISON Leaning Stool is designed for industrial settings but functions well in many offices, providing strength and stability. Strong nylon glides engage the floor to ensure firm positioning of the seat and the incorporated rollers permit the chair to be easily moved between workstations. The unique design of the base maximizes stability while greatly reducing the risk of tripping for passersby.
Two different cylinder options are available on the RISON so that there is a RISON which is the right height range for everybody. Most will be able to take advantage of models RLS-11113 and RLS-B-11120 (back version) that offer a seat height adjustable from 26" - 35.5" and are suited to heights from about 5'2" up to 6'6". The model RLS-S-11130 is intended for shorter individuals and should accommodate those of heights ranging from 4'5" to 5'5".
Models
Model #
Description
Price
In Stock?
Buy Now
RLS-11113
RISON Leaning Stool, seat height range of 26" - 35.5".
$400.00
Yes
RLS-B-11120
RISON Leaning Stool with Angle-Adjustable Back, seat height range of 26" - 35.5".
$475.00
No
RLS-S-11130
RISON Leaning Stool (short), seat height range of 22" - 29".
The RSTMOR Drafting PLUS Chair from ErgoVerse is specifically designed to meet the needs of those of larger build. Dual rectangular steel tube construction rated to support up to 440 pounds and extra-thick padding on the larger-than-average seat are ...
The RSTMOR Drafting PLUS Chair from ErgoVerse is specifically designed to meet the needs of those of larger build. Dual rectangular steel tube construction rated to support up to 440 pounds and extra-thick padding on the larger-than-average seat are combined with easy adjustability to create a chair that is both functional and durable. The RSTMOR chair also offers individuals the option of sitting at a greater height than traditional chairs, which can significantly reduce the stress to which the knees are subjected with repetitive sitting and standing from a standard chair height. An adjustable footrest provides relaxation for the feet and lower legs, especially convenient if working at a raised counter that requires a greater seat elevation. For individuals who are working in a warehouse or assembly environment with raised counters this seat can enable them to reduce the load on their legs and joints by letting them sit while still being able to reach the work surface. The chair also folds for storage.
The SRLYN Perching Seat from ErgoVerse offers those working at height-adjustable workstations the option of an elevated perching seat or a leaning stance. The SRLYN helps to reduce strain on the legs and feet as well as on the muscles of the lower ba ...
The SRLYN Perching Seat from ErgoVerse offers those working at height-adjustable workstations the option of an elevated perching seat or a leaning stance. The SRLYN helps to reduce strain on the legs and feet as well as on the muscles of the lower back and core. The leaning position also minimizes the effort required to return to a fully standing position and permits a greater range of motion and greater reach than does a standard seated position.
The SRLYN Perching Seat features an infinitely adjustable height range from 26.4" to 35.8" and locking forward tilt adjustment from 5° up to 20°. The 14.2" wide by 12.6" deep formed polyurethane seat provides a large firm cushioned seating surface with an integrated handle for ease of movement. (Note: Individuals under 5'6" may find this seat too high but those who are taller might benefit from its greater upper range as it can accommodate heights up to 6'6".)
Strong nylon glides engage the floor to ensure secure positioning of the seat. The convenient integrated handle can be used to tip the SRLYN onto the small transport rollers incorporated into the rear glides for movement about a workspace. The unique design of the heavy-duty textured black tubular steel base maximizes stability while also greatly reducing the risk of tripping for passersby. Though this ruggedly designed seat has an industrial look it can also work well in an office setting.