Manufactured primarily for healthcare practices, the Active Key QuickClean Medical Mouse by Contour Design features an IP68 covering with 3-button scroll mechanism. Available in a standard conventional size, the 5 button design and absence of an open scroll wheel readily facilitates thorough sterilization. The impervious IP68 sealant that encases the QuickClean Medical Mouse prevents harsh chemicals or liquids from gaining access to the circuitry ; an ideal attribute for the severe sanitation protocols present in laboratories or other medical facilities. Even the battery compartment is sealed, with screws to ensure accidental opening does not occur. The ambidextrous design of the AK-PMH3 Medical Mouse can be useful for shared workstations as the mouse accommodates either dominant mousing hand; or individuals that prefer alternating hands. As with all mice, primary buttons can be swapped within the operating system settings.

As the QuickClean is geared towards healthcare facilities, mouse manipulations can be executed with little effort and high precision. The soft silicone housing prevents the hand from slipping out of position, even with medical gloves, encouraging a more relaxed hand both during use and at rest. The compact 5-button layout ensures efficient mouse performance and control, desirable features in time-critical settings. Each button is engineered to only require gentle actuation yet stable enough to prevent accidental clicks.

Often new wired mice tend to re-align or re-adjust the placement of the mouse when the hand is removed. The absence of a cord eliminates the concerns of cord interference, letting the mouse remain in place when transitioning to and from a keyboard.

Manufactured primarily for healthcare practices, the Active Key QuickClean Medical Mouse by Contour Design features an IP68 covering with Touch Zone scrolling mechanism. Available in one a standard conventional size, the mouse features a 2 button design for left and right clicks, and a central touch zone for scrolling with the swipe of a finger. The impervious IP68 sealant that encases the QuickClean Medical Mouse prevents harsh chemicals or liquids from gaining access to the circuitry; an ideal attribute for the severe sanitation protocols present in laboratories or other medical facilities. Even the battery compartment is sealed, with screws to ensure accidental opening does not occur. The ambidextrous design of the AK-PMH3 Medical Mouse can be useful for shared workstations as the mouse works equally well for right- and left-handed individuals; or for those who prefer alternating hands. As with all mice, primary buttons can be swapped within the operating system settings.

As the QuickClean is geared towards healthcare facilities, mouse manipulations can be executed with little effort and high precision. The soft silicone housing prevents the hand from slipping out of position, even with medical gloves, encouraging a more relaxed hand both during use and at rest. The compact layout ensures efficient mouse performance and control, desirable features in time-critical settings. The buttons are engineered to require only gentle actuation yet stable enough to prevent accidental clicks. Because the touch scroll function can be less precise this mouse is best suited to more general applications where high precision movement is required within spreadsheets or similar interfaces. Where those are required the Active Key QuickClean Medical Mouse with button scrolling should be considered.

Often new wired mice tend to re-align or re-adjust the placement of the mouse when the hand is removed. The absence of a cord eliminates the concerns of cord interference, letting the mouse remain in place when transitioning to and from a keyboard.

The Contour Mouse Wireless from Contour Design features a two decade old, proven orthopedically supportive design. Available in several sizes - 3 for the right hand and 2 for the left hand, this design largely eliminates the potential for static grip force, a risk that is present with most conventional mice. This design features an arch on the middle of the mouse that aligns with the hollow of the hand, supporting and positioning the hand in a similar manner to arch supports in a shoe. This also provides a clear indication of where to position the hand for maximum support, allowing gravity to do much of the work in controlling the mouse. The buttons are extra long and peak at the base of the button, allowing clicks to be generated from the knuckle closest to the hand instead of the tip of the finger. Scrolling action is transferred to the thumb which permits the fingers to remain at rest by eliminating the awkward traditional "clawing" movement required to spin the wheel. The side thumb rest offers easy access to both the scroll wheel and the rocker switch. The rocker switch is located just below the thumb rest and offers access to back/forward functions when browsing the web or within documents.

The Contour Mouse Wireless is equipped with a 10 level sensor that reads from 800 - 2800 DPI. Sensitivity adjustment is via a single button located on the underside of the mouse. Two-colour LED indicators identify the current DPI setting. The three light-activation buttons feature crisp activation with an audible click. These provide access to Left, Middle and Right Clicks. The scroll wheel is equipped with a rubber tire for grip and has distinct but soft detents.

Those who like to customize their mouse will appreciate the wide range of programmable options that are available. There are five buttons that can be reassigned to perform any standard mouse action as well as a host of specialized actions. For those with a good memory the available PC and Mac compatible drivers also offer the option of setting "program specific" command layouts.

The Contour Mouse Wireless employs 2.4Ghz Advanced Wireless Technology and is powered by a rechargeable Lithium-ion battery. The 2-hour rapid recharge can provide up to 3 months use on a single charge. Of course, individual usage will determine the recharge cycle.

Select the optimum size using this Sizing Guide.
Note: The Contour Mouse now comes with a 30-day warranty administered by Micwil Group of Companies.

La souris Contour Mouse Wireless de Contour Design a une conception reconnu depuis 20 ans, qui offre un support orthopédique. Disponible en plusieurs tailles - 3 pour la main droite et 2 pour la main gauche, cette conception élimine en grande partie le potentiel de force statique (de pincé/de saisir la souris), un risque qui est problématique avec la plupart des souris conventionnelles. Cette conception comporte un arc au milieu de la souris qui s`aligne avec le creux de la main, soutenant et positionnant la main d`une manière similaire aux supports de voûte dans un soulier. Cela fournit également une indication claire de l`endroit où positionner la main pour un soutien maximal, permettant à la gravité de faire une grande partie du travail pour contrôler la souris. Les boutons sont très longs et leur sommet est situé à la base du bouton, ce qui permet de générer des clics à partir de la jointure la plus proche de la main plutôt que du bout du doigt. L`action de défilement est transférée au pouce, ce qui permet aux doigts de rester au repos en éliminant le mouvement de " griffe " traditionnel et maladroit nécessaire pour faire tourner la roue. Le repose-pouce latéral offre un accès facile aux molette de défilement et à le bouton à bascule. Le bouton à bascule est situé juste en dessous du repose-pouce et permet d`accéder aux fonctions d`avance et de recul lors de la navigation sur le Web ou dans les documents.

La Contour Mouse Wireless est équipée d`un capteur à 10 niveaux qui lit entre 800 et 2800 DPI. L`ajustement de la sensibilité est fait à l`aide d`un seul bouton situé sous la souris. Deux couleurs LED indiquent l`ajustement actuel du DPI. Les trois boutons d`activation de la lumière se caractérisent par une activation précise et un clic audible. Ils permettent d`accéder aux clics gauche, milieu et clics droit. La molette de défilement est équipée d`un pneu en caoutchouc et possède des crans distincts mais doux.

Ceux qui aiment personnaliser leur souris apprécieront le large éventail d`options programmables disponibles. Cinq boutons peuvent être réaffectés pour effectuer n`importe quelle action standard de la souris ainsi qu`une multitude d`actions spécialisées. Pour ceux qui ont une bonne mémoire, les pilotes compatibles PC et Mac offrent également la possibilité de définir des dispositions de commande "spécifiques au programme".

La Contour Mouse Wireless utilise la technologie sans fil avancée 2.4Ghz et est alimentée par une batterie rechargeable au lithium-ion. La recharge rapide de 2 heures peut permettre jusqu`à 3 mois d`utilisation sur une seule charge. Évidemment, l`utilisation individuelle déterminera le cycle de recharge.

Prennez note de bien mésurer la main à l`aide de ce Sizing Guide.

The AK-C8112 Active Key Disinfectable Medical Keyboard from Contour Design is a full-size keyboard designed for hygienic environments such as medical practices, dental clinics, and laboratories where infection control is a primary concern. The keyboard is encased in a fully-sealed silicone membrane that prevents solids, fluid, and microbes from entering the casing, ideal when maintaining a sterile workspace.

With an IP68 waterproof rating, the AK-C8112 Medical keyboards can be safely wiped or even fully immersed in hospital-grade disinfectants. The low profile of the key surfaces minimizes gaps between keys, ensuring effective cleaning. If cleaning is required while in active use, the "CleanFunction" Mode is accessed by simply pressing "Fn + Shift", immediately locking out all key input to ensure that no accidental keystrokes are entered. Active input is restored by repeating the same sequence.

AK-C8112 Active Key Disinfectable Medical Keyboards are equipped with premium Cherry SX Scissor keyswitches to ensure the reliability necessary in clinical environments. Despite being fully covered by the silicone membrane they offer crisp tactile feedback, arising from a combination of switch design and a more responsive silicone membrane than some similar products employ. These keyboards have standard 104/105 key office configurations with a complete numeric keypad situated at the right hand side, providing for full alphanumeric data entry. The ultra-flat key profile ensures effortless transitioning to adjacent keys and the ultra smooth surface provides considerable comfort to the touch while typing.

Contour Design offers two different Shuttle devices that are powerful productivity enhancement tools for video and audio editors. The ShuttlePRO V.2 offers the wider range of function and customization. It features 15 programmable buttons (9 with removable covers to accommodate custom legends) as well as highly responsive Shuttle and Jog controls that provide excellent tactile feedback. The ShuttlePRO driver comes pre-configured with settings for over 100 Audio and Video editing applications. In fact, it will detect the active application and automatically switch to the appropriate shortcut profile. Of course the driver can also be used to easily modify or create custom profiles to match individual production demands. Macro capabilities mean that multiple tasks can be assigned to and executed with the press of a single button.

The ShuttlePRO V.2 provides multimedia editors with a ergonomic editing interface that will let them better maintain and maximize their productivity. This device features a low-profile ambidextrous design that facilitates one-hand access to the fifteen (15) fully programmable buttons, the inner Shuttle dial and the outer Jog wheel. The alloy inner ring or "shuttle" has 3 "dimples" for fingertip control and rotates smoothly and continuously through 360°, with distinct tactile detents. The outer black ring or "jog" is rubberized and spring-loaded. It facilitates fast forward and rewind, and returns to centre immediately upon release. Both the jog and shuttle can be custom configured for many other purposes such as scrolling, volume control, sequencing, even mouse clicks.

If the 15 buttons seem daunting the more affordable ShuttleXpress offers a smaller number (5) while retaining the same programming functionality.

The RollerMouse Pro Slim by Contour Design introduces new design features (trayless rollerbar, narrower 15" width) to the Contour Design line of RollerMouse central pointing devices. As with other models the RollerMouse Pro Slim sits immediately between the operator and keyboard space bar. This keeps all mousing activity "inline", i.e., in the area immediately in front of the keyboard, eliminating the need to reach to either left or right for a mouse. This also makes it suitable for situations where there may be insufficient room for a mouse to be placed immediately beside the keyboard. Like all RollerMouse solutions, cursor movement is achieved by manipulating the tube-like cylindrical "rollerbar" with the fingertips. Rotating the rollerbar moves the cursor up and down, and sliding the bar from side to side accomplishes horizontal movement. Once the desired location is achieved, a left click can be generated by pressing down on the bar (the force required for this is adjustable from an ultra-light touch to highly tactile). Eight buttons and a scroll wheel are located below the bar to generate left/middle/right clicks, copy, paste, back, forward and vertical scrolling. There is also a cursor speed button on the left end of the device for accessing ten different speed settings ranging from 600 to 2800 dpi. The RollerMouse Pro also comes with adjustable keyboard "risers" to lift up standard and compact single piece keyboards. Controls can also be heavily customized using the downloadable driver.

The RollerMouse Pro is equipped with a 0.7" diameter smooth-surfaced rollerbar similar to that on the premium RollerMouse Red models. The bar is 7.1" wide and offers a finer degree of control than other models that have bars of a smaller diameter, especially for vertical movement. The new "trayless" design also means that crumbs, dust or debris can no longer collect below the rollerbar but rather drop straight through onto the desk surface for easier cleanup. The robust plastic housing results in a quality sturdy housing. The Vegan Leather palm support attaches magnetically and offers firm cushioning for the heels of the hands and is easily removable for cleaning. The tracking technology on the RollerMouse Pro further enhances cursor control, especially valuable on multi-monitor workstations. All these design elements make cursor control precise and effortless without compromising durability and robustness. The "virtual" clicking mechanism generates a "percussion-free" but audible "click" that can be adjusted in volume or fully disabled if so desired.

The RollerMouse Pro is 15" in width, narrower than most other RollerMouse models. This makes it very suitable for use with compact or compact financial keyboards (such as the Balance Keyboard).
Note: Where a full-width keyboard is being used one of the wider models such as the RollerMouse Red, RollerMouse Pro3, or RollerMouse Free3 should be considered.

La RollerMouse Pro Slim de Contour Design présente de nouvelles caractéristiques de conception (barre de roulement sans plateau, largeur plus étroite de 15po) pour la gamme Contour Design de dispositifs de pointage central. Comme pour les autres modèles, la RollerMouse Pro Slim se place immédiatement entre l'opérateur et la barre d'espace du clavier. Cela garde toute activité de la souris "en ligne", c'est-à-dire dans la zone située juste devant le clavier, ce qui évite d'avoir à s'étirer le bras vers la gauche ou la droite pour bouger une souris. Cette solution convient également aux situations où il n'y a pas assez de place pour placer une souris juste à côté du clavier. Comme pour toutes les solutions RollerMouse, le déplacement du curseur s'effectue en manipulant du bout des doigts le "rollerbar" cylindrique en forme de tube. La rotation du rollerbar déplace le curseur vers le haut et vers le bas, et le glissement de la barre d'un côté à l'autre permet un déplacement horizontal. Une fois l'emplacement souhaité est atteint, un clic gauche peut être généré en appuyant sur la barre (la force requise pour ce faire est ajustable entre ultra léger à très tactile). Huit boutons et une roulette de défilement sont situés sous la barre pour générer des clics gauche/milieu/droit, copier, coller, reculer, avancer et faire défiler verticalement. Il y a également un bouton de vitesse du curseur au bout du côté gauche pour ajuster entre dix différents vitesse de 600 à 2800 dpi. La RollerMouse Pro est également livré avec des "risers" ajustablent pour soulever les claviers conventionnels et compacts d'un seul morceau. Les commandes peuvent également être très personnalisées à l'aide du pilote téléchargeable.

La RollerMouse Pro Slim est équipée d'une barre de roulement à surface lisse de 0.7po de diamètre, similaire à celle des modèles de haut qualité du RollerMouse Red. La barre a une largeur de 7.1po et offre un degré de contrôle plus fin que les autres modèles qui ont des barres d'un diamètre plus petit, en particulier pour les mouvements verticaux. La nouvelle conception "sans plateau/trayless" signifie également que les miettes, la poussière ou les débris ne peuvent plus s'accumuler sous la barre de roulement, mais tombent directement sur la surface du bureau, ce qui facilite le nettoyage. Le boîtier en plastique robuste donne une qualité solide. Le support de paume en Cuir Vegan se fixe par magnétiquement et offre un rembourrage ferme pour les talons des mains; il peut être facilement enlever pour le nettoyage. La technologie de suivi de la RollerMouse Pro Slim améliore encore le contrôle du curseur, ce qui est particulièrement utile sur les postes de travail à plusieurs moniteurs. Tous ces éléments de conception rendent le contrôle du curseur précis et sans effort, sans compromettre la durabilité et la robustesse. Le mécanisme de clic "virtuel" génère un "clic" audible mais sans percussion, dont le volume peut être ajusté ou totalement désactivé si nécessaire.

La RollerMouse Pro Slim a une largeur de 15po, plus étroite que la plupart des autres modèles de RollerMouse. Elle convient donc parfaitement à une utilisation avec des claviers compacts ou financiers compacts (tels que le Balance Keyboard ). Veuillez noter: Lorsqu'un clavier pleine largeur est utilisé, veuillez consideré l'utilisation d'un des modèles plus larges tels que la Rollermouse Red , la Rollermouse Pro3 ou la Rollermouse Free3 .

The ArmSupport Max from Contour Design is designed specifically for use with the RollerMouse Red. The ArmSupport Red mounts directly to the desk or worksurface, providing a rigid extended arm support to reduce the load on the shoulders. The foam cushioning ensures comfort even during extended work sessions and the leather-like cover is easily cleaned. In order to use the ArmSupport Max, the standard palm support included with the RollerMouse Red is detached and set aside. The RollerMouse Red then "docks" directly into the ArmSupport Max, creating a single solution that combines the ergonomic benefits of an extended arm support with the convenience of a centrally-positioned RollerMouse.

The ArmSupport Max is especially beneficial for those who may be working at elevated workstations where the usual support provided by chair armrests is not available. Height adjustable workstations are also ideal locations to deploy the ArmSupport Max because these workstations are easily adjusted in height to find the optimum support position.

L'ArmSupport Max de Contour Design est spécialement conçu pour être utilisé avec la RollerMouse Red. L'ArmSupport Red se fixe directement sur le bureau ou la surface de travail, offrant un appui-bras rigide et allongé qui permet de réduire la charge sur les épaules. Le rembourrage en mousse assure un confort optimal, même durant de longues sessions de travail, et le matériel a un aspect de cuir qui se nettoie facilement. Pour utiliser l'ArmSupport Max, il suffit de détaché et de mettre de côté l'appui-paume standard fourni avec la RollerMouse Red. La RollerMouse Red « s'attache » alors directement dans l'ArmSupport Max, créant ainsi une solution unique qui combine les avantages ergonomiques d'un accoudoir allongé à le confort d'une souris RollerMouse placée au centre.

L'ArmSupport Max est particulièrement utile pour les personnes travaillant à des postes de travail surélevés, où l'appui habituel fourni par les accoudoirs d'une chaise n'est pas disponible. Les postes de travail ajustable en hauteur sont également des endroits idéaux pour installer l'ArmSupport Max, car leur hauteur peut être facilement ajustée afin de trouver la position d'appui optimale.

The RollerMouse Go (formerly the RollerMouse Mobile) by Contour Design is a compact version of the well-known RollerMouse Red, designed for mobility and ideally suited for use with compact keyboards. This central pointing device conveniently positions between the operator and keyboard space bar, keeping mousing activity "inline", i.e., in the area immediately in front of the keyboard, and eliminating the need to reach for a mouse. This also makes it suitable for use where there may be insufficient room for a mouse to be placed immediately beside the keyboard. Like all RollerMouse products, cursor movement is achieved by manipulating the tube-like cylindrical "rollerbar" with the fingertips. Rotating the rollerbar moves the cursor up and down, and sliding the bar from side to side accomplishes horizontal movement. Once the desired location is achieved, a left click can be generated by pressing down on the bar (the force required for this is adjustable from an ultra-light touch to highly tactile). Four tactile buttons and a clickable scroll wheel are located below the bar to generate left/middle/right clicks, copy, paste, and vertical scrolling. Cursor speed can be adjusted via a button on the right end of the RollerMouse Go, with ten different speed settings from 600 to 4000 DPI. The RollerMouse Go also ships with two heights of rubber feet that can be used to elevate low profile compact keyboards to better match the rollerbar height. Controls can also be customized using the downloadable driver.

The RollerMouse Go is equipped with the same larger diameter rollerbar found on the RED, as compared to that on the FREE3 or PRO3. On the RollerMouse Go this 0.8" diameter bar is 3.875" wide and offers a finer degree of control, especially for vertical movement. The surface of the bar is textured with raised bumps that offer tactile feedback to further improve all aspects of cursor control. Innovative tracking technology on the RollerMouse Go further enhances cursor control, letting it work equally well on both single and multi-monitor workstations. All these design elements make cursor control more precise and effortless without compromising durability and the robust nature of the sturdy aluminum housing. To further improve the ergonomics even the traditional mechanical "click" has been replaced with a newer "virtual" clicking mechanism that generates a "percussion-free" but audible "click" that can be adjusted in volume or fully disabled if so desired.

Because the compact RollerMouse Go is designed for mobile use it is is able to connect in three ways - to Bluetooth-enabled devices, via a an included 2.4 gHz wireless receiver, or as a wired device via the included charging cable. It also comes with a folding protective sleeve that attaches and closes magnetically.

The optional RollerMouse Go Dock accessory is for those who want the convenience of the more compact RollerMouse Go for travelling but desire the ergonomic benefits afforded by a full-size RollerMouse when they are in the office. The RollerMouse Go simply sockets into the Dock to provide extended palm and wrist support not only directly in front of the RollerMouse Go but also to the right, where a full-size keyboard will have the navigation and numeric keypad. And, when leaving the office, the RollerMouse Go again simply detaches from the dock for full portability.

While the RollerMouse Go and Dock can work perfectly well with any type or size of keyboard those using full-size or separated keyboards may wish to consider one of the full-size RollerMouse Models.

La RollerMouse Go (auparavant la RollerMouse Mobile) de Contour Design est une version compacte de la RollerMouse Red bien connu, conçue pour la mobilité et idéal pour utiliser avec des claviers compacts. Ce dispositif de pointage central se positionne entre la personne et la barre d'espace du clavier, ce qui permet de maintenir l'utilisation de la souris "en ligne", c'est-à-dire dans la zone située immédiatement devant le clavier, et évite d'avoir à s'étirer le bras pour atteindre une souris. Cela le rend également adapté aux situations où l'espace disponible est insuffisant pour placer une souris juste à côté du clavier. Comme tous les RollerMice, le déplacement du curseur est fait en manipulant la « rollerbar » une barre cylindrique en forme de tube avec le bout des doigts. La rotation de la barre à rouleau permet de déplacer le curseur vers le haut et vers le bas, tandis que le glissement de la barre d’un côté à l’autre permet un déplacement horizontal. Une fois l'emplacement souhaité atteint, un clic gauche peut être fait en appuyant sur la barre (la force nécessaire pour cela est réglable de ultra-légère à très tactile). Quatre boutons et une roulette de défilement sont situés sous la barre pour générer des clics gauche / milieu / droit, copier, coller, reculer, avancer et défiler verticalement. La vitesse du curseur peut être ajuster à l'aide d'un bouton situé à l'extrémité droite de la RollerMouse Go, avec dix niveaux de vitesse différents allant de 600 à 4 000 DPI. La RollerMouse Go est également fournie avec deux tailles de pieds en caoutchouc permettant de surélever les claviers compacts à profil bas afin de mieux les adapter à la hauteur de la rollerbar. Les commandes peuvent également être personnalisées à l'aide du pilote téléchargeable.

La RollerMouse Go est équipée de la même largeur en diamètre du barre de contrôle cylindrique que celle de la RED, contrairement à celles des modèles FREE3 ou PRO3. Sur la RollerMouse Go, cette barre de 0.8po de diamètre mesure 3.875po de large et offre un contrôle plus précis, notamment pour les mouvements verticaux. La surface entière de la barre est texturée avec des bosses élever qui offrent un retour tactile pour améliorer encore tous les aspects du contrôle du curseur. La technologie de suivi innovante de la RollerMouse Go améliore encore le contrôle du curseur, ce qui est particulièrement utile sur les postes de travail multi-moniteurs. Tous ces éléments de conception rendent le contrôle du curseur plus précis et sans effort sans compromettre la durabilité du boîtier en aluminium robuste. Pour améliorer encore l'ergonomie, même le "clic" mécanique traditionnel a été remplacé par un mécanisme de clic "virtuel" plus récent qui génère un "clic" sans percussion mais audible, dont le volume peut être ajusté ou entièrement désactivé si on le souhaite.

Parce que la RollerMouse Go compacte est conçu pour les applications mobile/portable elle peut se connecter de trois façons différentes - à des appareils compatibles Bluetooth, via une clé sans fil 2.4 GHz inclus, ou en mode avec fil avec le câble de recharge inclus. Elle est également livrée avec un sleeve de protection pliable qui se fixe et se ferme magnétiquement.

L'accessoire optionnel RollerMouse Go Dock s'adresse à ceux qui souhaitent profiter de la RollerMouse Go, plus compacte, qui est plus pratique durant le transport, tout en bénéficiant des avantages ergonomiques offerts par une RollerMouse de taille standard au bureau. La RollerMouse Go s'emboîte simplement dans le Dock pour offrir un support étendu pour la paume et poignet, non seulement directement devant la RollerMouse Go, mais aussi à droite, là où se trouvent les touches de navigation et le pavé numérique sur un clavier standard. Et, à la fin de la journée, la RollerMouse Go se détache tout simplement du Dock pour une portabilité totale.

Bien que la RollerMouse Go et le Dock fonctionnent parfaitement avec n'importe quel type ou taille de clavier, ceux qui utilisent des claviers standards ou claviers séparées pourraient considérer pour l'un des Modèles RollerMouse à taille standard.

The Contour Portable Laptop Stand from Contour Design is a flexible, height-adjustable stand which elevates laptop or notebook screens to a more ergonomic viewing height. The lightweight stand conveniently folds down for storage or transport, and can easily fit in a pocket. The six different settings offer varying degrees of laptop/notebook screen elevation or 6 different screen viewing angles for tablets. Despite its light weight, the Contour Portable Laptop Stand can support up to 12 pounds. This stand is ideal for business travelers, students, and anyone who uses a laptop computer or tablet. When combined with an external keyboard and mouse it can greatly improve portable workstation ergonomics.

The Laptop Riser from Contour Design is designed to support laptops ranging in size from 11-15.6", as well as any standard tablet. It can even serve as a book stand or document holder if desired, offering a greater elevation than many other devices are able to provide. With sturdy metal construction and weighing in at 3.2 lbs, this stand is intended for deployment on a desk surface. The support lip can be as low as 1.8" when fully folded or as high as 6" when elevated. With the convenient friction adjustment it is possible to adjust this to any height and angle and it will securely hold that position. The 3.2 pound weight ensures stability for most applications but care still needs to be taken to keep the center of gravity positioned over the base.
Note: Laptop screen elevation is determined by the laptop dimensions, the height the stand is elevated to, and the angle at which the stand is set.