Corner Sleeve DE200 Series

The DE200 Series Corner Sleeve from Humanscale can be used to create a usable workspace out of a tightly curved or inside right angle corner. The steel plate creates a diagonal bridge (16.5" wide) between the supporting surfaces, enabling the user to fully utilize the entire workstation. The user is now given access to an expanded work area (right, left and corner), enhancing the ergonomics of the workspace.

The curved shape of the DE200 Series Corner Sleeve makes it most suitable for installations where a keyboard arm and tray will be deployed. The underside of the unit is pre-drilled to accommodate most common keyboard arms with no additional modifications required. The Corner Sleeve DE200 can be adjusted to fit desks from 1" to 1.5" thick. The DE250 model (available by Special Order) can adjust to fit desks between 1.5" and 2.5" in thickness.

Note: The curved shape and small dimensions of the DE200 Series Corner Sleeve are less than ideal for directly using a keyboard or mouse on it. There are several other larger products which are better suited to this purpose.

• Accommodates Most Work Surfaces: The DE200 Model will mount to work surfaces 1" to 1.5" (2.5 - 3.8 cm) thick. The DE250 (available by Special Order) will fit desk thicknesses from 1.5" to 2.5" (3.8 - 6.35 cm).
• Low Profile: Humanscale Corner Sleeves are formed from heavy gauge sheet metal which provides rigidity while maintaining a very low profile over the mounting surface.
• Compatible with Most Articulating Keyboard Arms: The front lower lip of Humanscale Corner Sleeves are pre-drilled to accept most articulating arms. The installation hardware includes bolts for securing these arms to the sleeve.
• Durable and Professional: Humanscale Corner Sleeves are formed from heavy gauge steel, finished with rounded corners, and powder-coated in Black.
• Easy Installation: Installation of a Humanscale Corner Sleeve is as simple as adjusting the thickness to match the thickness of the desk top (simple tools required) and then sliding it into position on the desk. However, it is generally recommended to secure it to the underside of the desk with the included screws or to use something such as double-sided tape to keep it from sliding.

• Installation Instructions: PDF

• Width: 16.5" (41.9 cm)
• Top Depth: 8.5" (21.6 cm)
• Bottom Lip Depth: 1.5" (3.8 cm)
• Thickness Capacity:
  DE200 - 1.0" - 1.5" (2.5 cm - 3.8 cm)
  DE250 - 1.5" - 2.5" (3.8cm - 6.35 cm)
• Weight: 3.0 lbs (1.36 kg)
• Finish: Black Powder Coating
• Warranty: 15 Years
• Package Contents: Corner Sleeve DE200 (or DE250), Installation Hardware, Installation Guide

• When considering a Corner Sleeve several factors should be considered.
  • First, determine if this is to provide surface area for deployment of keyboard and/or mouse. If this is the case you will want to ensure that the surface area is of sufficient size to provide a level surface for placement of the keyboard (at the minimum) or both the keyboard and mouse.
  • Second, if the Corner Sleeve is intended to be used for the mounting of a Keyboard Track and Tray you will want to ensure that the keyboard tray can extend far enough that you have practical access to both the keyboard and mouse without having to reach in under the desk top. With larger corner sleeves this is generally not an issue.
  • Third, you will want to determine whether the keyboard tray will need to be elevated level with the desk surface. This will require that the rear edge of the keyboard tray be positioned far enough out from the inside corner of the desk that the rear corners of the tray will clear the sides of the desk. This can usually be addressed by either utilizing a tray with the rear corners cut at a diagonal or by selecting a wider corner sleeve which will move the mounting point for the keyboard track further out from the inside corner. Doing this creates a wider space for the keyboard tray.