The Eureka Sit-Stand Desktop 46 from Eureka Ergonomic converts a fixed-height desk into a height-adjustable sit-stand "desk". Unlike smaller desktop units this 46" wide really does convert an entire desk. It is free-standing (no clamping required) and can be moved between locations without disassembly. Dual hand-operated releases permit infinite keyboard height adjustment to any point from 1.125" - 15.75" above the mounting surface. If mounted on a 29.5" high surface this will provide a standing height suited to users up to well over six feet tall. The upper worksurface and the keyboard tray move in concert, maintaining a 4.25" difference between the two levels. In order to minimize the physical demands upon the user, adjustment is assisted by a gas springs rated up to a maximum combined rating of 35 lbs (5 on keyboard tray, 30 on worksurface). Ready-to-use out of the box, the Sit-Stand Desktop 46 is available in a professional Black finish with Cobalt Blue trim adding a finishing touch.
The keyboard tray features large 10" x 10" mousing areas on both right and left sides with enough space (19") between them to accommodate a full-size keyboard. The central portion of the tray is 14" deep and able to accommodate a laptop if desired. A slot at the rear of the keyboard tray serves to keep the largest of tablets viewable and accessible at all times when using a keyboard.
The expansive upper worksurface is 19" deep in the middle (see dimension image in the image gallery) with left and right zones that extend forward another 4.75" to provide additional space for documents, phone or gaming devices. The angular top reaches a maximum width of 46" and tapers back to 29" at the rear. With these dimensions this is one of the largest desktop sit-stand units available.
The large surface can support dual monitors up to 32" diagonal, placed directly on the worksurface or deployed using clamp mount monitor arms to provide greater adjustment.
Note: The Eureka Sit-Stand Desktop 46 will NOT fit on a 24" desk unless there is at least 1.5" of clearance behind the desk. When the Eureka Sit-Stand Desktop 46 is at its lowest setting the upper worksurface extends 1.375 inches back beyond the base, making it best suited to installation on surfaces at least 30" in depth or where there is sufficient clearance behind the base. At the lowest setting the overall depth of the unit is 34.25" so even on a 30" deep desk the front edges of the tray will extend out about 4.5". When the unit is raised it cantilevers forward towards the user as it rises, to an overall depth of 41.5" at the highest setting, extending about 12" out from the front of a 30" deep mounting surface. |
