Deluxe Sacro-Ease Seat Support

Sacro-Ease Seat Supports from McCarty's Sacroease were initially designed over 70 years ago to "rebuild" the support that is lost as seat cushioning and supporting structures age. They also serve well to improve the functionality of low cost office chairs or uncomfortable mass transit seating. Built to outlast and outperform other available solutions, all models of the Sacro-Ease Seat Supports feature the same foundation that has always set them apart from other available options. A 1/8" thick by 1" wide steel band frames both the seat and back of the supports, with a steel folding hinge at the rear of the seat. Over these frames are stretched rubber bands that serve to absorb vibration when travelling over rough terrain or to provide a cushioning resistance when sitting on seats that are no longer as supportive as they once were. The steel frame is bendable which enables users to adjust the lumbar curvature and position to provide themselves with optimally-placed support.

The Deluxe Sacro-Ease Seat Support features the primary steel base and rubber band structure with a cover of high quality durable upholstery. The seat portion is padded with a 1" layer of standard poly foam and features a durable, non-skid bottom that keeps the Sacro-Ease firmly in place on all seats. It is stocked in the standard 15" seat width but is also available by Special Order in a 12" width that works with narrower bucket seats or a 19" width for bench seats or larger users. Deeper seats are also available by Special Order.

A convenient handle facilitates transport between locations when the seat support is folded. The Deluxe model is intended for use where both shock absorbance and comfort are being considered. The cushioning effect of the stretched rubber band is supplemented by the additional 1" thick layer of poly foam cushioning. The back features a curved foam lumbar pad that is easily adjusted to any height along the back and can be used to enhance and provide cushioning over the lumbar curve of the steel frame.
Please Note: There is no foam padding in the back of this model, only on the seat and in the foam lumbar pad.

• Sturdy Bendable Steel Frame: A 1" wide x 1/8" thick steel frame acts as a structural foundation for both the seat and backrest. This frame can be carefully bent (see Usage Tips) by hand as needed to adjust the lumbar curve for both position and curvature. The front edge of the seat can also be bent downward as needed to eliminate potential pressure points.
• Shock Absorbing Rubber Bands: The steel frame is covered with tightly-stretched wide rubber bands that serve to absorb shock and vibration, smoothing out a rough ride. When used on fixed seating these bands serve to enhance or reinforce the existing cushioning.
• Cushioned Seat: The Deluxe Sacro-Ease Seat Support has a 1" thick pad of poly foam in the seat that supplements the shock-absorbing action of the foundational rubber bands.
  
• Heavy Duty Upholstery: Sacro-Ease Seat Supports are upholstered with a heavy-duty fabric designed to provide many years of wear.
• Non-Slip Base: The underside of each seat features a non-slip surface that safely secures it in place on almost any surface.
• Foldable for Transport: The heavy-duty steel hinge accommodates easy folding for transport between locations.
• Convenient Carrying Handle: Each Sacro-Ease Seat Support is equipped with a carrying strap which is easily accessed once the seat is folded for transport.
• Adjustable Lumbar Pad: The Deluxe Sacro-Ease Seat Support includes an adjustable foam Lumbar Pad that can be positioned at any point along the backrest. This can be used in concert with the frame bending to achieve an optimum level of lumbar support or can be used to add a bit of extra padding wherever it is needed on the back.

• Width:
  Standard: 15.0" (38.1 cm)
  Narrow: 12.0" (30.5 cm)Special Order Only
  Wide: 19.0" (48.3 cm) Special Order Only
• Depth (front to back): 14.0" (35.6 cm)
• Height: 19.0" (48.3 cm)
• Back Structure:
  Steel Frame, Rubber Bands, Fabric Cover
  Cushioning: NO padding
  Height-Adjustable Foam-Padded Lumbar Support
• Seat Structure:
  Steel Frame, Rubber Bands, Fabric Cover
  Cushioning: 1" (2.5 cm) Thick Poly Foam Cushioning
• Available Colours: Black, Brown, Light Brown,Grey
• Warranty: 5 Years, Manufacturer Direct

• Bending Instructions
  The steel frame of this Sacro-Ease product is formed of a mild steel that permits repeated bends to be made without sacrificing the strength of the frame. Smooth gentle curves are important to ensure that the steel is not "crimped" which WILL reduce its ability to hold a new curve. Bending over a sharp edge or with abrupt movements or aggressive pressure will increase the risk of this type of damage occurring.
  
  To reduce the curve of the frame the Sacro-Ease should be placed on a firm flat surface with the curve facing down. Gentle pressure can then be applied against the frame both above and below the curve. It is best to begin with light pressure and repeat several times, increasing pressure as needed to reduce the curve to the desired degree. This procedure needs to be completed on both sides of the frame.
  
  To increase the curvature it is best to place the Sacro-Ease over a larger rounded surface, curved side up. Then gently press down on the frame above and below the curve, repeating several times with increasing pressure until the desired curve is achieved. Of course, adjust both sides equally to ensure a balanced support.