TaskMate EZ

The Taskmate EZ from HealthPostures is available in two models. The Computer Workstation version includes both an adjustable height work surface and monitor mount. The Surface version does not include the monitor mount but can be used as to elevate a laptop for short term use. The Surface version can also serve well as an adjustable assembly or work surface in industrial applications were individuals of varying height may utilize workstations. Taskmate EZ units are equipped by default with a thru-mount that bolts through the surface of the fixed height desk using a single hole. There is also a clamp mount accessory available that can be used to mount the Taskmate EZ to desks no deeper than 24". Both the work surface as well as the monitor height are independently reconfigurable by physically lifting and moving the unit from one notch to another, providing configuration options in 1.5" increments. The monitor can be attached to any of 14 notches in the vertical column, providing a range of height between keyboard tray and the middle of the monitor of a minimum of 13" and a maximum of 31.5".

The Taskmate EZ is capable of supporting up to 50 pounds, and provides the ability to set the monitor (at its midpoint) from 15" to 33" above the mounting surface. The work surface can be positioned from 2" to 20" above the mounting surface when being used with the monitor support and up to 33" above the mounting point when used without a monitor. The work surface provides an 18" deep x 23.5" wide area for the keyboard, mouse and papers. In idustrial settings it can serve to position tools and equipment at a range of heights. The monitor mount will accommodate monitors with either 75mm and 100mm VESA patterns. Some assembly is required (approximately 5-10 minutes).

• Owner's Manual: PDF


• Spec Sheet: PDF