Keyboards Mice Furniture Accessories Other

Sit-Stand Solutions - Table Tops

1 2 >


Rectangular 24-Inch Depth Tabletop Series

by ConSet



These tabletops provide a standard rectangular work surface which easily blends into most office settings and provides individuals with a familiar, conventional desktop. The work surfaces are all 23" deep, and range from 22" to 70" wide, and are desi ...



These tabletops provide a standard rectangular work surface which easily blends into most office settings and provides individuals with a familiar, conventional desktop. The work surfaces are all 23" deep, and range from 22" to 70" wide, and are designed for fixed width cubicles. This allows them to be easily integrated i.e. the 48-24S series is 46" x 23", and allows a 1" clearance space on three sides for cubicles designed for a 48" x 24" desktop. The tabletops are available in a Beech Veneer (on 0.875" thick MDF), and are Triple Coated with UV hardened lacquer with profiled lacquered rounded edges. Two 8 cm grommet holes (one in each corner at the back of the top) assist in cable management.

To find out which bases are compatible with these tabletops, please consult this base/tabletop compatibility chart.






Models
If you are considering a standing workstation, you may want to consider an Anti-Fatigue Mat to provide comfort from hard floor surfaces.
Model #DescriptionPriceIn Stock?Buy Now
24-24SBConSet Rectangular Tabletop, 22" (56cm) wide x 23" (58cm) deep, Beech Veneer over MDF$115.00Yes
36-24SBConSet Rectangular Tabletop, 34" (86cm) wide x 23" (58cm) deep, Beech Veneer over MDF$142.50Yes
42-24SBConSet Rectangular Tabletop, 40" (102cm) wide x 23" (58cm) deep, Beech Veneer over MDF$167.50Yes
48-24SBConSet Rectangular Tabletop, 46" (117cm) wide x 23" (58cm) deep, Beech Veneer over MDF$195.00Yes
60-24SBConSet Rectangular Tabletop, 58" (147cm) wide x 23" (58cm) deep, Beech Veneer over MDF$245.00Yes
72-24SBConSet Rectangular Tabletop, 70" (178cm) wide x 23" (58cm) deep, Beech Veneer over MDF$280.00Yes





Rectangular 29-Inch Depth Tabletop Series

by ConSet



These tabletops provide a standard rectangular work surface which easily blends into most office settings and provides individuals with a familiar, conventional desktop. The work surfaces are all 29" deep, and range from 40" to 82" wide, and are desi ...



These tabletops provide a standard rectangular work surface which easily blends into most office settings and provides individuals with a familiar, conventional desktop. The work surfaces are all 29" deep, and range from 40" to 82" wide, and are designed for fixed width cubicles. This allows them to be easily integrated i.e. the 48-30S series is 46" x 29", and allows a 1" clearance space on three sides for cubicles designed for a 48" x 30" desktop. The tabletops are available in a Beech Veneer (on 0.875" thick MDF), and are Triple Coated with UV hardened lacquer with profiled lacquered rounded edges. Two 8 cm grommet holes (one in each corner at the back of the top) assist in cable management.

To find out which bases are compatible with these tabletops, please consult this base/tabletop compatibility chart.






Models
If you are considering a standing workstation, you may want to consider an Anti-Fatigue Mat to provide comfort from hard floor surfaces.
Model #DescriptionPriceIn Stock?Buy Now
42-30SBConSet Rectangular Tabletop, 40" (102cm) wide x 29" (74cm) deep, Beech Veneer over MDF$197.50Yes
42-30SMConSet Rectangular Tabletop, 40" (102cm) wide x 29" (74cm) deep, Maple Veneer over MDF$215.00Yes
48-30SBConSet Rectangular Tabletop, 46" (117cm) wide x 29" (74cm) deep, Beech Veneer over MDF$205.00Yes
60-30SBConSet Rectangular Tabletop, 58" (147cm) wide x 29" (74cm) deep, Beech Veneer over MDF$245.00Yes
66-30SBConSet Rectangular Tabletop, 64" (163cm) wide x 29" (74cm) deep, Beech Veneer over MDF$275.00Yes
66-30SMConSet Rectangular Tabletop, 64" (163cm) wide x 29" (74cm) deep, Maple Veneer over MDF$295.00Yes
72-30SBConSet Rectangular Tabletop, 70" (178cm) wide x 29" (74cm) deep, Beech Veneer over MDF$290.00Yes
72-30SMConSet Rectangular Tabletop, 70" (178cm) wide x 29" (74cm) deep, Maple Veneer over MDF$325.00Yes
84-30SBConSet Rectangular Tabletop, 82" (178cm) wide x 29" (74cm) deep, Beech Veneer over MDF$370.00Yes
84-30SMConSet Rectangular Tabletop, 82" (178cm) wide x 29" (74cm) deep, Maple Veneer over MDF SPECIAL ORDER ONLY$400.00No





Rectangular 31.5-Inch Tabletops

by ConSet



These tabletops provide a rectangular work surface which easily blend into most office settings and provide individuals with a familiar, conventional desktop. The work surface is 47.25" / 39.375" (120 cm / 100 cm) wide x 31.5" (80 cm) deep, and is ea ...



These tabletops provide a rectangular work surface which easily blend into most office settings and provide individuals with a familiar, conventional desktop. The work surface is 47.25" / 39.375" (120 cm / 100 cm) wide x 31.5" (80 cm) deep, and is easily integrated into a cubicle or office workstation. These tabletops are available in a Beech Veneer (on 0.875" thick MDF), and are Triple Coated with UV hardened lacquer with profiled lacquered rounded edges. Two 8 cm grommet holes (one in each corner at the back of the top) assist in cable management.






Models
If you are considering a standing workstation, you may want to consider an Anti-Fatigue Mat to provide comfort from hard floor surfaces.
Model #DescriptionPriceIn Stock?Buy Now
100-80SB100-80S Series Rectangular Tabletop, MDF, Beech Veneer$225.00Yes





ThermoDesk ELITE Tabletop

by iMovR



The ThermoDesk ELITE Table Tops from iMovr are constructed with 1 1/8" thick high-density MDF cores, machined with softly rounded edges and corners. The finish is 3D vacuum laminated at high heat with the resulting laminate finish fully wrapped aroun ...



The ThermoDesk ELITE Table Tops from iMovr are constructed with 1 1/8" thick high-density MDF cores, machined with softly rounded edges and corners. The finish is 3D vacuum laminated at high heat with the resulting laminate finish fully wrapped around the top, the sides, and the grommet hole interiors in one complete and seamless film. This process ensures a fully sealed, non-porous surface that protects against damage caused by humidity and exposure to liquids. Multiple layers of finish provide additional resistance against abrasion and damage from many common cleaning and disinfectant products. A wide palette of colours is available, including Hayward Cherry, Clove Mahogany, Light Maple and Urban Walnut. This attention to the details of construction and finish ensure that the commercial grade ThermoDesk ELITE Table Tops will provide the right tone in any office environment--from entry level to the most senior executive.

The table tops are pre-drilled to fit the iMovr ELITE frame and are fitted with threaded metal inserts that ensure quick and easy installation with a single Phillips screwdriver. The metal inserts ensure a well-secured top as well as the ability to remove and replace tops without wear on the mounting points. (Note: ThermoDesk ELITE tops can be installed on other sit-stand desk frames but the threaded inserts may not be useable in those applications.)






Models
If you are considering a standing workstation, you may want to consider an Anti-Fatigue Mat to provide comfort from hard floor surfaces.
Model #DescriptionPriceIn Stock?Buy Now
ELITE-3048CiMovR ThermoDesk ELITE Tabletop, 48" wide x 30" deep x 1.125" high, Hayward Cherry$280.00Yes
ELITE-3048HiMovR ThermoDesk ELITE Tabletop, 48" wide x 30" deep x 1.125" high, Clove Mahogany$280.00Yes
ELITE-3048MiMovR ThermoDesk ELITE Tabletop, 48" wide x 30" deep x 1.125" high, Light Maple$280.00Yes
ELITE-3048B2iMovR ThermoDesk ELITE Tabletop, 48" wide x 30" deep x 1.125" high, Solid Black$245.00Yes
ELITE-3048SCiMovR ThermoDesk ELITE Tabletop, 48" wide x 30" deep x 1.125" high, Shaker Cherry$280.00Yes
ELITE-3048SGiMovR ThermoDesk ELITE Tabletop, 48" wide x 30" deep x 1.125" high, Solid Shark Grey$245.00Yes
ELITE-3048UWiMovR ThermoDesk ELITE Tabletop, 48" wide x 30" deep x 1.125" high, Urban Walnut$280.00Yes
ELITE-3060CiMovR ThermoDesk ELITE Tabletop, 60" wide x 30" deep x 1.125" high, Hayward Cherry$385.00Yes
ELITE-3060HiMovR ThermoDesk ELITE Tabletop, 60" wide x 30" deep x 1.125" high, Clove Mahogany$385.00Yes
ELITE-3060MiMovR ThermoDesk ELITE Tabletop, 60" wide x 30" deep x 1.125" high, Light Maple$385.00Yes
ELITE-3060B2iMovR ThermoDesk ELITE Tabletop, 60" wide x 30" deep x 1.125" high, Solid Black$345.00Yes
ELITE-3060SCiMovR ThermoDesk ELITE Tabletop, 60" wide x 30" deep x 1.125" high, Shaker Cherry$385.00Yes
ELITE-3060SGiMovR ThermoDesk ELITE Tabletop, 60" wide x 30" deep x 1.125" high, Solid Shark Grey$345.00Yes
ELITE-3060UWiMovR ThermoDesk ELITE Tabletop, 60" wide x 30" deep x 1.125" high, Urban Walnut$385.00No
ELITE-3072CiMovR ThermoDesk ELITE Tabletop, 72" wide x 30" deep x 1.125" high, Hayward Cherry$670.00Yes
ELITE-3072HiMovR ThermoDesk ELITE Tabletop, 72" wide x 30" deep x 1.125" high, Clove Mahogany$670.00Yes
ELITE-3083CiMovR ThermoDesk ELITE Tabletop, 83" wide x 30" deep x 1.125" high, Hayward Cherry$725.00Yes
ELITE-3083HiMovR ThermoDesk ELITE Tabletop, 83" wide x 30" deep x 1.125" high, Clove Mahogany$725.00Yes
ELITE-3083B2iMovR ThermoDesk ELITE Tabletop, 83" wide x 30" deep x 1.125" high, Solid Black$650.00Yes
ELITE-3083MiMovR ThermoDesk ELITE Tabletop, 83" wide x 30" deep x 1.125" high, Light Maple$725.00Yes
Accessories
Model #DescriptionPriceIn Stock?Buy Now
DUAL-AC-NODE-B iMovR Grommet-Mounted Dual-AC Power Socket Node, Black, fits 3" grommet holes, comes with 72" cord$167.50 Yes
DUAL-AC-NODE-S iMovR Grommet-Mounted Dual-AC Power Socket Node, Silver, fits 3" grommet holes, comes with 72" cord$167.50 Yes





Omega Everest ThermoDesk Table Top

by iMovR



The Omega Everest Table Top, part of iMovr's ThermoDesk line, features an innovative keyboard tray built directly into the surface of the table top. The new "SteadyType" keyboard tray helps reduce wrist extension and monitor shake at standing and wal ...



The Omega Everest Table Top, part of iMovr's ThermoDesk line, features an innovative keyboard tray built directly into the surface of the table top. The new "SteadyType" keyboard tray helps reduce wrist extension and monitor shake at standing and walking workstations, and helps users of treadmill desks counter the 'backwards-pulling' effect of the treadmill.

Users moving to standing workstations and walking workstations can sometimes find it difficult to position the keyboard at a steep enough negative incline. The result is wrist extension, i.e. an upward bend at the wrist that can increase the risk of injury to the hands, wrists and forearms. The integrated, inset design of the "SteadyType" keyboard tray allows users to position the keyboard at steep negative inclines, from 0° to -85°.

Another issue for walking workstation users is the tendency to anchor the heels of the hands to the desk in an effort to keep their hands correctly positioned over the keyboard. This results in a constant, and significant strain on the muscles of the arms, shoulders and upper body. The greater degree of negative tilt offered by the "SteadyType" keyboard tray helps users more easily counter the backwards pulling effect of the treadmill. With the keyboard tray inclined at a steeper negative incline the backwards pull of the treadmill now works in the user's favour to hold the user's hands in position against the keyboard.

Both of the above issues are addressed by the SteadyType Keyboard Tray. The improved hand and wrist positioning enables users to maintain good walking posture while letting the muscles of the hands, forearms and upper body relax. This more natural posture will result in improved typing performance over standard 'flat-topped' walking workstations.

By integrating the "SteadyType" keyboard tray into the body of the table top and moving it closer to the centre of the desk top, iMovr has succeeded in significantly reducing the phenomenon known to users of height adjustable workstations as 'monitor shake'.

On the Omega Everest table top, the mouse sits on the primary desk surface but remains easily accessible within the Comfort Zone due to the unique positioning of the keyboard 'in' the desktop. The "SteadyType" keyboard tray has two height settings that enable the user to select the most beneficial positions for the keyboard and mouse relative to each other.

The 1 1/8" thick Omega Everest ThermoDesk Table Tops feature softly rounded edges and corners, vacuum-wrapped at high heat. The 3D Lamination process creates a seamless surface and the grommet hole interiors are perfectly covered and sealed. The worksurface has no sharp edges or square corners and is completely non-porous, helping to protect it from humidity and spilled liquids. Multiple layers of finish provide resistance to abrasion and damage from many common cleaning and disinfectant products. A wide palette of colours, including Hayward Cherry, Clove Mahogany, Light Maple, Urban Walnut and others ensure the right tone in any office environment from entry level to senior executive.

The Omega Everest tops are pre-drilled to fit the iMovR Elite electric height-adjustable desk frame and are fitted with threaded metal inserts to ensure quick and measure-free installation with a single Phillips screwdriver. The metal inserts ensure a well-secured top as well as the ability to remove and replace tops without wear on the mounting points.

Note: Omega Everest tops may be installed on other sit-stand desk frames; however, the threaded inserts might not be useable. It will also be necessary to ensure that these frames do not interfere with the incline and height adjustment of the integrated SteadyType keyboard tray.






Models
If you are considering a standing workstation, you may want to consider an Anti-Fatigue Mat to provide comfort from hard floor surfaces.
Model #DescriptionPriceIn Stock?Buy Now
OD-REC3060SC-KiMovR Omega Everest Tabletop, 60" wide x 30" deep x 1.125" high, Shaker Cherry$780.00Yes





ThermoDesk Uptown Select Table Top

by iMovR



The ThermoDesk Uptown Select Table Tops from iMovr are constructed with 1 1/8" thick high-density MDF cores, machined with softly rounded edges and corners. The finish is 3D vacuum laminated at high heat with the resulting laminate finish fully wrapp ...



The ThermoDesk Uptown Select Table Tops from iMovr are constructed with 1 1/8" thick high-density MDF cores, machined with softly rounded edges and corners. The finish is 3D vacuum laminated at high heat with the resulting laminate finish fully wrapped around the top, the sides, and the grommet hole interiors in one complete and seamless film. This process ensures a fully sealed, non-porous surface that protects against damage caused by humidity and exposure to liquids. Multiple layers of finish provide additional resistance against abrasion and damage from many common cleaning and disinfectant products. A wide palette of colours is available, including Hayward Cherry, Clove Mahogany, Light Maple and Urban Walnut. This attention to the details of construction and finish ensure that the Uptown Select Table Tops will compliment any office.

Uptown Table Tops feature dual 3" grommet holes and are equipped with threaded steel inserts for effortless installation on the iMovr UpStage 30 frames using a single Phillips screwdriver. The 47" and 59" tops will fit the UpStage 30 Narrow frame while the 71" and 83" tops are equipped to match the UpStage 30 Wide frames. The metal inserts ensure a well-secured top as well as the ability to remove and replace tops without wear on the mounting points. (Note: ThermoDesk Uptown Select tops can be installed on other sit-stand desk frames but the threaded inserts may not be useable in those applications.)






Models
If you are considering a standing workstation, you may want to consider an Anti-Fatigue Mat to provide comfort from hard floor surfaces.
Model #DescriptionPriceIn Stock?Buy Now
UT-RED3047C-NiMovR Uptown Select Table Top, 47" wide x 30" deep x 1.125" high, Harward Cherry$300.00Yes
UT-RED3059H-NiMovR Uptown Select Table Top, 59" wide x 30" deep x 1.125" high, Clove Mahogany$385.00Yes
UT-RED3059UW-NiMovR Uptown Select Table Top, 59" wide x 30" deep x 1.125" high, Urban Walnut$385.00Yes
UT-RED3071AC-NiMovR Uptown Select Table Top, 71" wide x 30" deep x 1.125" high, Almond Cherry$670.00Yes
UT-RED3083H-NiMovR Uptown Select Table Top, 83" wide x 30" deep x 1.125" high, Clove Mahogany$725.00Yes
Accessories
Model #DescriptionPriceIn Stock?Buy Now
DUAL-AC-NODE-B iMovR Grommet-Mounted Dual-AC Power Socket Node, Black, fits 3" grommet holes, comes with 72" cord$167.50 Yes
DUAL-AC-NODE-S iMovR Grommet-Mounted Dual-AC Power Socket Node, Silver, fits 3" grommet holes, comes with 72" cord$167.50 Yes





L Shaped Corner 29-Inch Tabletops with Return

by ConSet



These tabletops provide a standard L-Shaped work surface which easily blend into most office settings and provide individuals with a familiar, conventional desk with return. The main work surface is 70"/ 82" (178 cm / 208 cm) wide x 29" (74 cm) deep. ...



These tabletops provide a standard L-Shaped work surface which easily blend into most office settings and provide individuals with a familiar, conventional desk with return. The main work surface is 70"/ 82" (178 cm / 208 cm) wide x 29" (74 cm) deep. The return side depth is 47" (119 cm) with the extended part of the return 23" (58 cm) deep. These tabletops are easily integrated into a cubicle or office workstation. The corner is rounded for the comfort of the user.

These tabletops are available in a Beech Veneer (on 0.875" thick MDF), and are Triple Coated with UV hardened lacquer with profiled lacquered rounded edges. Returns on the left and the right are available. A single grommet hole at the back of the tabletop (in the corner) assists in cable management.

To find out which bases are compatible with these tabletops, please consult this base/tabletop compatibility chart.






Models
If you are considering a standing workstation, you may want to consider an Anti-Fatigue Mat to provide comfort from hard floor surfaces.
Model #DescriptionPriceIn Stock?Buy Now
72-48LBL Shaped Corner 29-Inch Tabletop with Return on Left, Main Desk is 70" (178cm) wide x 29" (74cm) deep, return is 18" (45cm) wide x 23" (58cm) deep, Rounded Corners, Beech Veneer over MDF$480.00Yes
72-48RBL Shaped Corner 29-Inch Tabletop with Return on Right, Main Desk is 70" (178cm) wide x 29" (74cm) deep, return is 18" (45cm) wide x 23" (58cm) deep, Rounded Corners, Beech Veneer over MDF$480.00No
84-48LBL Shaped Corner 29-Inch Tabletop with Return on Left, Main Desk is 82" (208cm) wide x 29" (74cm) deep, return is 18" (45cm) wide x 23" (58cm) deep, Rounded Corners, Beech Veneer over MDF$515.00Yes
84-48RBL Shaped Corner 29-Inch Tabletop with Return on Right, Main Desk is 82" (208cm) wide x 29" (74cm) deep, return is 18" (45cm) wide x 23" (58cm) deep, Rounded Corners, Beech Veneer over MDF$515.00No
Accessories
Model #DescriptionPriceIn Stock?Buy Now
24-24SB ConSet Rectangular Tabletop, 22" (56cm) wide x 23" (58cm) deep, Beech Veneer over MDF$115.00 Yes
36-24SB ConSet Rectangular Tabletop, 34" (86cm) wide x 23" (58cm) deep, Beech Veneer over MDF$142.50 Yes





ThermoDesk ELECTRA Tabletop

by iMovR



The ThermoDesk ELECTRA Table Tops from iMovR use 3D Lamination Technology, a process which enables the production of a superior top in both appearance and quality. A wide palette of colours, including Hayward Cherry, Clove Mahogany, Light Maple and U ...



The ThermoDesk ELECTRA Table Tops from iMovR use 3D Lamination Technology, a process which enables the production of a superior top in both appearance and quality. A wide palette of colours, including Hayward Cherry, Clove Mahogany, Light Maple and Urban Walnut ensure the right tone in any office environment from entry level to senior executive.

The 3/4" thick high-density MDF tops are machined with softly rounded edges and corners before being vacuum-wrapped at high heat. This enables the laminate finish to be wrapped around the top and sides in one complete and seamless film, even including the grommet hole interiors which are perfectly covered and sealed. The resulting worksurface has no sharp edges or square corners and is completely non-porous, ensuring protection from damage related to humidity and exposure to liquids. Multiple layers of finish provide resistance to abrasion and damage from many common cleaning and disinfectant products. iMovR is so confident in the ThermoDesk products that they are backed with a 5 year warranty.

ThermoDesk ELECTRA tops are pre-drilled to fit the iMovR ELECTRA frames, ensuring quick, measure-free installation.

NOTE: Thermdesk Electra tops can be installed on other sit/stand desk frames but the pre-drilled holes may not be useable in those applications.






Models
If you are considering a standing workstation, you may want to consider an Anti-Fatigue Mat to provide comfort from hard floor surfaces.
Model #DescriptionPriceIn Stock?Buy Now
ELECT-3060CiMovR ThermoDesk ELECTRA Tabletop, 60" wide x 30" deep x 0.75" high, Haywood Cherry$305.00Yes
ELECT-3072MiMovR ThermoDesk ELECTRA Tabletop, 72" wide x 30" deep x 0.75" high, Light Maple$530.00Yes
Accessories
Model #DescriptionPriceIn Stock?Buy Now
DUAL-AC-NODE-B iMovR Grommet-Mounted Dual-AC Power Socket Node, Black, fits 3" grommet holes, comes with 72" cord$167.50 Yes
DUAL-AC-NODE-S iMovR Grommet-Mounted Dual-AC Power Socket Node, Silver, fits 3" grommet holes, comes with 72" cord$167.50 Yes





ThermoDesk Upsilon Table Top

by iMovR



The ThermoDesk Upsilon Table Tops from iMovR are constructed with 3/4" thick high-density MDF cores, machined with softly rounded edges and corners. The finish is 3D vacuum laminated at high heat with the resulting laminate finish fully wrapped aroun ...



The ThermoDesk Upsilon Table Tops from iMovR are constructed with 3/4" thick high-density MDF cores, machined with softly rounded edges and corners. The finish is 3D vacuum laminated at high heat with the resulting laminate finish fully wrapped around the top, the sides, and the grommet hole interiors in one complete and seamless film. This process ensures a fully sealed, non-porous surface that protects against damage caused by humidity and exposure to liquids. Multiple layers of finish provide additional resistance against abrasion and damage from many common cleaning and disinfectant products. Finishes available include Hayward Cherry, Clove Mahogany and Light Maple woodgrains or Black, Shark Grey and Designer White solid colours. This attention to the details of construction and finish ensure that the Upsilon Table Tops will compliment any office.

ThermoDesk Upsilon table tops have dual 2.35" grommet holes and are pre-drilled to fit the iMovR UpStage 24 frame for simplified installation. (Note: ThermoDesk Upsilon tops can be installed on other sit-stand desk frames but the predrilled holes may not be usable in those applications.)






Models
If you are considering a standing workstation, you may want to consider an Anti-Fatigue Mat to provide comfort from hard floor surfaces.
Model #DescriptionPriceIn Stock?Buy Now
US-REA2447SC-NiMovR ThermoDesk Upsilon Table Top, 47" wide x 24" deep x 0.75" high, Shaker Cherry$260.00Yes
US-REA2459H-NiMovR ThermoDesk Upsilon Table Top, 59" wide x 24" deep x 0.75" high, Clove Mahogany$305.00Yes





ThermoDesk ELLURE Tabletop

by iMovR



The ThermoDesk ELLURE Table Tops from iMovR use 3D Lamination Technology, a process which enables the production of a superior top in both appearance and quality. A wide palette of colours, including Hayward Cherry, Clove Mahogany, Light Maple and Ur ...



The ThermoDesk ELLURE Table Tops from iMovR use 3D Lamination Technology, a process which enables the production of a superior top in both appearance and quality. A wide palette of colours, including Hayward Cherry, Clove Mahogany, Light Maple and Urban Walnut ensure the right tone in any office environment from entry level to senior executive. This is a product where the quality matches the name.

The 1 1/8" thick high-density MDF tops are machined with softly rounded edges and corners before being vacuum-wrapped at high heat. This enables the laminate finish to be wrapped around the top and sides in one complete and seamless film, even including the grommet hole interiors which are perfectly covered and sealed. The resulting worksurface has no sharp edges or square corners and is completely non-porous, ensuring protection from damage related to humidity and exposure to liquids. Multiple layers of finish provide resistance to abrasion and damage from many common cleaning and disinfectant products. iMovR is so confident in the ThermoDesk products that they are backed with a 5 year warranty.

The tops are then pre-drilled to fit the iMovR RELEVATE frame and fitted with threaded metal inserts which ensure quick and measure-free installation with a single Phillips screwdriver. The metal inserts ensure a well-secured top as well as the ability to remove and replace tops without wear on the mounting points.

NOTE: Thermdesk Ellure tops can be installed on other sit/stand desk frames but the threaded inserts may not be useable in those applications.






Models
If you are considering a standing workstation, you may want to consider an Anti-Fatigue Mat to provide comfort from hard floor surfaces.
Model #DescriptionPriceIn Stock?Buy Now
ELLURE-3048MiMovR ThermoDesk ELLURE Tabletop, 48" wide x 30" deep x 1.125" high, Light Maple$285.00Yes
ELLURE-3060WiMovR ThermoDesk ELLURE Tabletop, 60" wide x 30" deep x 1.125" high, Solid Frosty White$345.00No
ELLURE-3060CiMovR ThermoDesk ELLURE Tabletop, 60" wide x 30" deep x 1.125" high, Hayward Cherry$385.00No
ELLURE-3072HiMovR ThermoDesk ELLURE Tabletop, 72" wide x 30" deep x 1.125" high, Clove Mahogany$670.00Yes
Accessories
Model #DescriptionPriceIn Stock?Buy Now
DUAL-AC-NODE-B iMovR Grommet-Mounted Dual-AC Power Socket Node, Black, fits 3" grommet holes, comes with 72" cord$167.50 Yes
DUAL-AC-NODE-S iMovR Grommet-Mounted Dual-AC Power Socket Node, Silver, fits 3" grommet holes, comes with 72" cord$167.50 Yes





1 2 >


About Us Services Manufacturers Legal Notices Privacy