The Focal Fidget Active Stool from Safco Products is a lightweight portable stool that encourages users to actively engage in subtle movements while still remaining seated. The Fidget features a slightly curved bottom plate that enables continuous rocking movements in all directions. The contoured EVA Foam seat cushion provides a comfortable seating experience, whether for just a couple of minutes or for more extended periods. The base is constructed of ABS Plastic and reinforced Nylon with a steel support column capable of supporting up to 300 lbs.

The Fidget Active Stool comes in 3 heights to serve the seating requirements of a wide range of people. The 18" and 22" models will serve most adults for sitting at a traditional office desk or table height, while the 14" model is better suited to the needs of children sitting at a lower height of table or desk.
Note: The Fidget Active Stool is not designed or intended as a long-term seating solution and as such should not be considered for this application. There are numerous other traditional and alternative seating solutions much better suited for long-term sitting.

The Australian designed Bambach Saddle Seat has been in production for over 30 years. This particular model features a longer, flatter front pommel with a wider seat in the rear. It was designed based upon feedback from men who felt the standard models were too "short" and restrictive. The greater width at the rear offers ample support and cushioning for those of larger or heavier build. Although more suitable for men, women with wider hips or larger frame may also find it a suitable fit. This particular model is best suited for those over 5'7" and up to about 6'3". Shorter individuals or those with average or slender build will most likely not find this seat overly comfortable. The upholstery is high quality vinyl that offers a supple leather-like feel.

The LOTAH Sit-Stand Comfort Seat from Mey Chair Systems is well-suited to users who need to work as close as possible to the work surface of an elevated workstation, particularly those built on top of base cabinets or shelves. The LOTAH features a large plush saddle designed to be straddled, rather than leaned against. While keeping the torso in an ergonomically desirable upright orientation, the straddle posture positions the heels behind the bend of the knees, rather than extended forward of the knees as they would be on a leaning stool. (See the Tulean Sit-Stand Comfort Leaning Stool, also by Mey Chair Systems, for an illustration of this latter position.) This posture allows the user to move in much closer to flat-fronted work surfaces than might otherwise be possible. As a result, the LOTAH Sit-Stand Comfort Seat helps to reduce the risk of overreach injuries to the muscles of the shoulders and back, and the risk of injury to the muscles of the sides and mid-section caused by sitting sideways along the base of the workstation and twisting at the waist to get close enough to its surface. The LOTAH Sit-Stand Comfort Seat also helps to reduce the load borne by the feet and legs for those who work at elevated workstations by transferring the majority of the user's weight to the seat. As a result the user experiences less overall fatigue and a greater ability to maintain focus and concentration.

Built on a heavy tubular steel base with a gas spring that enables a height adjustment range of 24.8" to 31.5", and with a seat that has 15° of tilt range and 3" of cushioning, the LOTAH Sit-Stand Comfort Seat offers individualized comfort and long-term durability.

The 360° Arm Accessory from Kanewell can rotate to any position around the seat, enabling it to be used as an armrest for either the left or right arm, as a forward leaning or elbow support, or as a stretcher bar for the back. It can easily be locked into position when stability is required. The height of the 360° Arm Support is also adjustable so users are able to move it to the elevation that offers them the most suitable support. The 360° Arm Support can be used by anyone who may need to stabilize themselves while leaning. Dentists and Dental Assistants who are often leaning in or forward are able to let the Arm Support bear their weight, reducing strain and muscle fatigue in the lower back. Leaning against a stable fixed support also ensures a greater degree of control, making this accessory a valid consideration for anyone required to stretch outside of their immediate comfort zone while completing tasks requiring fine control or dexterity.

The 360° Arm Accessory features a thick layer of polyurethane foam which creates a supportive but cushioned resting surface. The high quality vinyl upholstery is resistant to a wide range of common cleaning solution making it suitable for applications were regular cleaning is required.Note: It is generally recommended that any cleaner be carefully tested in an inconspicuous location prior to full application. Sample testing swatches are available in advance upon request if there is concern regarding a particular cleaning agent.

The 360° Arm Accessory comes as a kit which includes both the 360° Arm Support Accessory as well as a replacement pneumatic spring. Installation on a new Kanewell Twin Adjustable Saddle Stool is done with ease, as part of the stool assembly. Retrofitting a fully assembled Stool requires removal and replacement of the existing gas lift cylinder with the unit included in the kit, thereby ensuring that the Stool retains is original range of height adjustment.

This sit-stand chair offers 10" of continuous height adjustment through the patent-pending Lyon Gravity Lock System, featuring postive locking at the set height. An innovative base allows the chair to be positioned wherever you need it. The chair is extremely stable with four strong nylon anti-slip glides which provide stability on most flooring. The ergonomically formed padded polyurethane seat tilts forward up to 20° and swivels 16° in either direction and automatically returns to the center when released. The matte black tubular steel base is durable and looks professional in industrial and office settings.

Note: The RISON is now available from ErgoVerse as the RISON Leaning Stool.

The RISON Sit-Stand Leaning Stools from Mey Chair Systems offer users the options of sitting or leaning throughout the workday. The non-vertical, or leaning, stance effectively reduces the weight load on the joints of both the legs and the feet as the stool, rather than the legs and feet, becomes the load bearing support. The upright position also significantly reduces the effort required to return to a fully standing position. The shock absorbing effect of the easily adjusted gas cylinder provides additional comfort when the user sits down.

The fixed seat offers an infinitely adjustable height range and a forward-locking tilt adjustment ranging from 5° to 20°. The polyurethane seat provides a firm yet cushioned seating surface with raised texture bumps. Model 11120 also features a firm polyurethane back support with independent angle adjustment to ensure that a comfortable upright posture can be maintained regardless of the chosen seat angle.
Note: The back on the 11120 has a 2.5" deep curvature in the middle, is 14" wide, and has firm edges. Some users with broader frames may find the back on this model too narrow and deep for a comfortable fit. The EZSIT Comfort Elite Sit-Stand Stool from Mey Chair Systems features a broader back better suited to users of broader build.

The heavy-duty textured black tubular steel base on the RISON Sit-Stand Leaning Stool is designed for industrial settings but functions well in many offices, providing strength and stability. Strong nylon glides engage the floor to ensure firm positioning of the seat and the incorporated rollers permit the chair to be easily moved between workstations. The unique design of the base maximizes stability while greatly reducing the risk of tripping for passersby.

With two height ranges now available, there is a RISON suitable for users from well under 5' to over 6 feet. Models 11113 and 11120 (back version) offer a seat height adjustable from 26" - 35.5" and are suited to users from about 5'2" up to 6'6". The model 11130 is intended for shorter users and should accommodate those of heights ranging from 4'5" to 5'5".

Note: This early generation Salli Swing is no longer in stock. It is shown to facilitate comparison with the nearly identical Salli Sway, which is in stock.

The Salli Swing combines the concepts of upright stance and movement, without the need to stand throughout the day.The unique rocking mechanism enables the seat to freely and continuously tilt or rock on the left-right and front-back axis (and all angles in combination) without any adjustments to the chair. This engages muscles in the abdominal and pelvic area, realizing benefits for the user similar to those that can be obtained through use of an exercise ball. It allows the lower back to remain mobile and the natural curvature of the spine to be maintained. The width of the two halves of the saddle seat are non-adjustable, but the design accommodates the majority of body types.

A gas spring lift provides height adjustment. Available lift sizes and the corresponding heights they accommodate are as follows: Short: 4'0" to 5'2", Mid: 5'1" to 6'1" and Tall: 5'8" to 6'5". The 5-point star base and lift have a chrome finish. The total weight of the chair is 10.9 kg (24 lb), the seat is 7.5 kg (16.5 lb). The Salli Swing is now only available by Special Order. It can be purchased upholstered in either genuine leather or polyurethane faux leather, each available in a range of colours.

The lightweight, compact and mobile Mogo Stool is an easily portable, lean-to stool which can provide relief from extended standing in a variety of environments both indoors and outdoors. The Mogo Stool has three telescoping sections that provide a range in height from 18.5" to 38" in 1" increments to accommodate both children and adults (up to 6'2" tall and under 250 lbs). The Mogo weighs only 2.6 lbs and can be collapsed to only 18.5" long. Its 14.5" x 8" seat pan is made of fibreglass-reinforced nylon and can be detached and snapped onto the leg for transport. The support frame is composed of extruded annodized aluminum and rubber, and features a reversible base that allows the seat to be used on turf or hard surfaces. (Caution: Do not use the Mogo Stool on wet or oily surfaces.)

Avec poids minimum, compact et mobile, le Mogo Stool est un tabouret facilement transportable, s`appuyer contre pour offrire du soulagement durant le debout prolongée dans les environnements variété, que soit intérieur ou extérieur. Le Mogo Stool a trois sections télescopiques qui offre une gamme d`hauteur de  18.5" jusqu`à 38" dans des pas de progression d`un pouce qui répond aux besoins des enfants et des adultes (jusqu`à 6'2" de grandeur et moin que 250 lb). Le Mogo a une poids de 2.6 lb et peut être effonré pour être seulement 18.5" de long. Le plateau du siège est 14.5" x 8" qui est fait en plastique renforcé au nylon et peut être détaché et installé ou fixée sur la jambre du tabouret pour le transport. Le poteau est composé de l`aluminum extrudé et de caoutchouc. Il a aussi une base réversible pour permettre aux tabouret pour ce faire utile sur le gazon ou sur la surface dure. (Avertissement: N`utilisez pas le Mogo Stool sur une surface mouillé ou huilleux.)

The Mobis II Seat is part of the next generation of lean-to (or -into) stools. Based on the original Mobis Seat it features a thicker seat cushion than the Mobis I, making it more suitable for users who intend to "sit" rather than "lean" throughout the day. Its unique design permits 6º of pivoting movement in all directions through a secure pivot point at the base. Rather than simply reducing the workload on the legs by taking the weight of the upper body (which traditional lean-to stools accomplish), this pivoting capability allows the Mobis to move with users as they perform tasks. This light-weight, elegant, grab-and-go version of the Locus Seat supports the body in a relaxed, upright posture. The Mobis II Seat has a range suitable for people from 4'11" to 6'8" tall. Dual lift controls let it be easily adjusted for work surfaces of varying heights. The small footprint of the Mobis II also makes it ideal for anyone creating a workstation that includes sitting or standing. By providing an in-between seating option for short-term tasks, the transition to a standing position becomes almost effortless. The Mobis II offers enough support to keep fatigue at bay, while still allowing the user to rotate a full 360º, to turn from side to side, and to flex forward, backward and laterally. The Mobis II is ideal for raised conference room table applications. Offering many real ergonomic benefits and improved comfort, the Mobis II is also a uniquely styled seating option that will make a positive statement about the workplace, as well as the occupant of the workstation.

The Mobis II Seats feature a Black base with Silver gas lift.

Mobis users might consider adding the Focal Foot Bar, to their workstation. The Focal Foot Bar is designed for users who would like to brace their feet against a sturdy, slip-free support when working at a sit-stand workstation, or who would like to prop one foot up from time to time when standing to alleviate strain on the lower back.

Caution: Focal Upright recommends against using the Mobis Seat with a standard foot rest, especially those with non-locking foot platforms.

The Pivot Seat from Focal Upright Furniture builds on the proven designs of the Mobis and Mogo seats by incorporating features from both of these models.The rounded pivot base ensures that the user is actively engaged with the Pivot throughout the day. The Pivot Seat offers a much greater degree of movement than the Mobis as users can also freely rotate up to 360º, leaning or pivoting as desired. As with the Mogo there is no fixed base to force the user to remain facing a specific direction - rotating or pivoting to another direction can be done at will. The rubber "Octogrip Overmold" on the base ensures that a user is secure in whatever posture they adopt. However, unlike the Mogo which cannot stand on its own, the Pivot Seat features a weighted base which automatically returns the seat to an upright position - ready for the next use.

The bowl-shaped weighted base of the Pivot Seat also exerts a subtle force, encouraging a user to maintain a degree of active tension in the core muscles to maintain the desired optimum position. This also means that users who wish to be active while sitting can easily employ the range of movement the Pivot offers to achieve this goal. The wide range of height adjustment and the ability to angle the seat by tilting forward enables the user to easily choose between active sitting and leaning (or any posture between).

The thick EVA Foam cushion on the Pivot Seat features built-in sitz bone contours for support and a waterfall edge to reduce pressure on the upper legs and promote healthy circulation.

NOTE: ErgoCanada does not recommend the Pivot Seat for use on hardsurface floors such as hardwood, linoleum or tile. Users may find that the base "walks" away from them as they lean and move. It does not have any issues on any type of carpeted floor or mat.