Keyboards Mice Furniture Accessories

Desktop Solutions

1 2 3 4 >


Corner Conversion Kit

by Fox Bay Industries



The Corner Conversion Kits from Fox Bay Industries are designed to convert a right angled or tightly curved inside corner into a usable work space. The steel plate creates a rigid bridge across the corner, converting an often cramped and awkward layo ...



The Corner Conversion Kits from Fox Bay Industries are designed to convert a right angled or tightly curved inside corner into a usable work space. The steel plate creates a rigid bridge across the corner, converting an often cramped and awkward layout into an ergonomically suitable workstation. Users are now able to work turned to the corner with easy access to an expanded desk surface to both the right and left. These also provide a means of mounting an articulating keyboard arm into corners where they cannot otherwise be installed.

Fox Bay Corner Conversion Kits are available in three sizes so users can select the size that best fits their workstation and meets their requirements. The 13.5" model works well on smaller workstations where there is limited space, such as tight cubicle applications. It provides just enough of a diagonal that most users would be able to work turned to the corner or also can serve to support a corner-mount articulating keyboard tray. The larger 21" and 26" models bridge a larger space for applications where there is sufficient room in the workspace to move the user further out from the corner. They can also support the installation of a keyboard arm if desired.






Models
Model #DescriptionPriceIn Stock?Buy Now
CC13-5B13.5" model, black$80.00Yes
CC21B21" model, black$125.00Yes
CC21G21" model, grey$125.00Yes
CC26B26" model, black$165.00Yes
CC26G26" model, grey$165.00Yes





Microdesk Document Holder and Writing Surface

by The Good Use Company Limited



The Microdesk Document Holder and Writing Surface provides an elevated secondary work surface directly between the keyboard and the monitor. Made of transparent, heavy-duty plastic, the Microdesk is designed to straddle the rear edge of the keyboard, ...



The Microdesk Document Holder and Writing Surface provides an elevated secondary work surface directly between the keyboard and the monitor. Made of transparent, heavy-duty plastic, the Microdesk is designed to straddle the rear edge of the keyboard, creating a stable, sloping platform for hand-writing tasks, as well as support for documents, books, mobile devices and other workstation essentials such as calculators or sticky notes. By allowing simultaneous inline access to materials and to the keyboard, this multi-function accessory enhances workstation comfort and convenience. Users can avoid the discomfort of twisting to the side, or of reaching over the keyboard to write; or the inconvenience of having to move the keyboard aside whenever they want to jot down notes.

The Microdesk Document Holder and Writing Surface comes in two sizes--Regular (22" x 12") and Compact (17" x 12"). Both sizes have non-slip feet and can be adjusted for height and incline. Included are two removable paper ledges (10" long x 0.25" high or 10" long x 0.75" high) to support even the thickest stacks of paper (up to 100 pages), and a non-slip ruler/line guide. The 22" Regular Microdesk will accommodate most standard-width keyboards. The 17" Compact Microdesk will accommodate compact keyboards, mini keyboards and combination/all-in-one keyboards up to 15.75" wide.

Note: Height restrictions apply. Please see Usage Tips for information on using this product with splayed or tented keyboards, or with contoured keyboards such as the Kinesis Advantage keyboard.

Two different pairs of side accessories—Standard and Step—allow the Microdesk to be used either on a desk top, or "stepped down" with the front legs on a keyboard tray and the rear legs on the desk top. The Standard Side Accessories create the comfortably sloped surface of the desktop configuration. The Step Side Accessories configure the Microdesk for use with a keyboard arm and tray.

Note: Both pairs of side accessories will work on the desk top; however only the Step Side Accessories can be used with a keyboard tray. The stepped down configuration can be especially useful for those working with low monitors and for those who wear progressive lenses.

Standard Side Accessories are included by default with all models (MD-REG-STD, MD-COM-STD, MD-SS). Step Side Accessories are included by default only with model MD-SS. The Step Side Accessories are an optional add-on to the MD-REG-STD and the MD-COM-STD and must be purchased separately.



Le porte-document et surface d`écriture de Microdesk fournis une deuxième surface de travail élevée directement entre le clavier et le moniteur. Fabriqué en plastique transparent et robuste, le Microdesk est conçu pour chevaucher le bordure d`arrière le clavier, pour créer une plate-forme stable et inclinée pour des tâches d`écriture, aussi que soutenir les documents, les livres, les appareils mobiles et d'autres nécessités de poste de travail comme calculatrices ou feuillets autocollants. En permettant l'accès en ligne des matériaux et du clavier simultané, cet accessoire multi-fonction améliore le confort et le commodité du poste de travail. Les utilisateurs peuvent éviter la malaise de se tordre vers le côté, ou de s`étirer au-dessus du clavier pour faire l`écriture; ou l`inconvénience de déplacer le clavier à part pour prendre les notes. Le porte-document et surface d`écriture de Microdesk est disponible en deux tailles--Standard (22 po x 12 po) et Compact (17 po x 12 po). Les deux modèles viennent avec des pieds non glissantes et sont ajustables en hauteur aussi qu`en pente. Inclus avec les deux modèles sont deux rebords démontables (10 po de long x 0.25 po de hauteur ou 10 po de long x 0.75 po de hauteur) pour soutenir les piles de papier épais (jusqu`à 100 pages), et une règle qui est non glissante. Le modèle Microdesk Standard de 22 po est compatible avec la majorité de claviers de largeur standard. Le Microdesk Compact de 17 po est compatible avec les claviers compacts et minis, ou les claviers tout-en-un (clavier intégrals/combo) jusqu`à 15.75 po de largeur.

Veuillez Noter: Restriction d`hauteur s`applique. Veuillez voir s`il vous plait Les Conseils d`Utilisation pour de l`information concernant comment utiliser ce produit avec les claviers évasés ou sur une tente, ou avec les claviers de 3D comme le clavier de Kinesis Advantage Contoured.

Les deux modèles, Standard et Compact, du Microdesk peuvent être configurés en deux mannières. Avec l`Accessoire Standard Side, inclus par défaut, le Microdesk peut être soutenu complètement sur la table. Avec l`Accessoire Step Side installé, le Microdesk peut être soutenu devant par la tablette de clavier, et derrière par dessus du bureau. Cette configuration étagée peut être utile pour ceux qui travail avec des moniteurs qui sont placés particulièrement plus bas (puisque ça ne vas pas cacher le moniteur) et pour ceux qui ont des verres progressifs. Veuillez Noter: Seulement le Standard Microdesk (22 po) est disponible avec les deux Accessoires Side inclus par défaut.







Models
Model #DescriptionPriceIn Stock?Buy Now
MD-REG-STDRegular Microdesk, 22" wide, includes 1 pair Standard Side Accessories. Compatible with desktop use only.$110.00Yes
MD-COM-STDCompact Microdesk, 17" wide, includes 1 pair Standard Side Accessories. Compatible with desktop use only.$105.00Yes
MD-SSRegular Microdesk, 22" wide, includes 1 pair Standard Side Accessories and 1 pair Step Side Accessories. Compatible with use on desktop or keyboard tray.$120.00Yes
Accessories
Model #DescriptionPriceIn Stock?Buy Now
MD-ACC-SA Standard Side Accessories (1 Pair), for use on desktop$20.00 Yes
MD-ACC-SS Step Side Accessories (1 Pair), for use with keyboard trays$15.00 Yes
MD-ACC-RULER500 Compact Ruler Accessory$12.50 Yes
MD-ACC-LL Low Paper Lip/Ledge Accessory (0.25" High)$12.50 Yes
MD-ACC-LH High Paper Lip/Ledge Accessory (0.25" High)$12.50 Yes
MD-ACC-FPBUILT Feet Accessory (Set of 4, 2 low and 2 high)$20.00 Yes





MultiRite Writing Platform / Document Holder

by Posturite



The MultiRite is an adjustable two-in-one writing surface and document holder which also has the ability to extend towards the user and 'float' over the keyboard without any need for support. The sides of the unit are composed of 2 sturdy plate metal ...



The MultiRite is an adjustable two-in-one writing surface and document holder which also has the ability to extend towards the user and 'float' over the keyboard without any need for support. The sides of the unit are composed of 2 sturdy plate metal sheets which are riveted at the front to a third centre piece. Side-mounted quick release knobs can be positioned to offer two ranges of adjustment. The lower range offers 8º to 22º of adjustment with the second range extending from 3º to 33º. The rear of the MultRite elevates from 4.7 inches to 6.7 inches or 4.7 inches to 8.25 inches depending on the range selected. The easel is made of rigid frosted acrylic with a thin metal ledge at the bottom to support documents. Two ball bearing tracks allow the easel to extend forward 6.5" (16.5 cm) along the track in the direction of the user, even able to drop 1.38" below the work surface. This is sufficient to some or all of the keyboard. This accessory eliminates the twisting and overreaching which often results when writing to the side or 'over' the keyboard

The elevated secondary extendable worksurface provided by the MultiRite gives users the ability to bring a temporary writing surface into their primary comfort zone which is typically occupied by the keyboard, and store it when the task is complete. A magnet prevents unintentional movement of the easel when it is stored, and rubber feet ensure overall stability of the unit. The MultiRite can be used on both single and dual surface worksurfaces as well as workstations with articulating keyboard arms or drawers. It is available in three sizes of varying widths; Standard (20"), Mini (14") and Large (22").

Note: Limited quantities of the original MultiRite (1104-Classic) which offers only a single range of angle adjustment are currently available (see image in gallery for comparison of features between models)






Models
Model #DescriptionPriceIn Stock?Buy Now
1104MMultiRite Writing Platform / Document Holder Version 2, with dual angle adjustment, Mini$165.00Yes
1104MultiRite Writing Platform / Document Holder Version 2, Standard, DISCONTINUED, with dual angle adjustment (Previously 1104020, replaced by 982-0403)$170.00No
Accessories
Model #DescriptionPriceIn Stock?Buy Now
1104003 MultiRest Accessory - Composed of Foam. Note: Due to the nature of this product we cannot offer our 30 day customer satisfaction guarantee on this product.$25.00 Yes
982-0410 MultiRest Gel Wrist Rest Accessory$27.50 Yes





Fixed CPU Holder

by KV Waterloo



The Fixed CPU holder from KV Waterloo is non-storable and mounts in a fixed location. It is available in a non-lockable model (7301D) and also a lockable (7311D) model. ...



The Fixed CPU holder from KV Waterloo is non-storable and mounts in a fixed location. It is available in a non-lockable model (7301D) and also a lockable (7311D) model.






Models
Model #DescriptionPriceIn Stock?Buy Now
7301DNon-Storable, non-swivel, non-lockable$85.00Yes
7311DNon-Storable, non-swivel, lockable SPECIAL ORDER ONLY. NO 30 DAY CSG$135.00No





Corner Sleeve DE200 Series

by Humanscale



The DE200 Series Corner Sleeve from Humanscale can be used to create a usable workspace out of a tightly curved or inside right angle corner. The steel plate creates a diagonal bridge (16.5" wide) between the supporting surfaces, enabling the user to ...



The DE200 Series Corner Sleeve from Humanscale can be used to create a usable workspace out of a tightly curved or inside right angle corner. The steel plate creates a diagonal bridge (16.5" wide) between the supporting surfaces, enabling the user to fully utilize the entire workstation. The user is now given access to an expanded work area (right, left and corner), enhancing the ergonomics of the workspace.

The curved shape of the DE200 Series Corner Sleeve makes it most suitable for installations where a keyboard arm and tray will be deployed. The underside of the unit is pre-drilled to accommodate most common keyboard arms with no additional modifications required. The Corner Sleeve DE200 can be adjusted to fit desks from 1" to 1.5" thick. The DE250 model (available by Special Order) can adjust to fit desks between 1.5" and 2.5" in thickness.

Note: The curved shape and small dimensions of the DE200 Series Corner Sleeve are less than ideal for directly using a keyboard or mouse on it. There are several other larger products which are better suited to this purpose.






Models
Model #DescriptionPriceIn Stock?Buy Now
DE200Corner Sleeve DE200 (for desks 1" - 1.5" thick)$82.50Yes
DE250Corner Sleeve DE250 (for desks 1.5" - 2.5" thick) SPECIAL ORDER$No





Gel Mouse Pad / Document Holder

by Aidata



The two-in-one design of the Gel Mouse Pad and Document Holder keeps the mouse, and up to five sheets of reference materials, within the user's Comfort Zone. Measuring 13" x 7.5" x 10", the mouse pad requires little space on the desk top. A clip at t ...



The two-in-one design of the Gel Mouse Pad and Document Holder keeps the mouse, and up to five sheets of reference materials, within the user's Comfort Zone. Measuring 13" x 7.5" x 10", the mouse pad requires little space on the desk top. A clip at the top of the flip-up document holder secures papers, and a non-skid base and cable management feature help to keep the work space organized. The mouse pad also features a gel-filled, lycra-covered palm support.

NoteWe are unable to offer our 30 Day Customer Satisfaction guarantee on this product.






Models
Model #DescriptionPriceIn Stock?Buy Now
GL005KGel Mouse Pad and Document Holder DISCONTINUED, NO CSG, CLEARANCE$15.00Yes





Dexterity Platforms Teardrop Mouse Tray

by Dexterity Platforms



The Teardrop Mouse Tray by Dexterity Platforms attaches to most chairs using the included velcro straps, providing you a mouse tray which can be conveniently located at the end of your chair arm. This allows you use your mouse while leaving your arm ...



The Teardrop Mouse Tray by Dexterity Platforms attaches to most chairs using the included velcro straps, providing you a mouse tray which can be conveniently located at the end of your chair arm. This allows you use your mouse while leaving your arm resting on your chair arm, and ensures that there is no 'reach' for the mouse. Units can clamp onto chair arms that are from 1.7" (4.3 cm) to 3.25" (8.25 cm) wide.






Models
Model #DescriptionPriceIn Stock?Buy Now
DP125ATeardrop Mouse Tray$60.00No
DP126ATeardrop Mouse Tray with Wrist Rest$85.00No





Ergo Flex Phone Arm

by Aidata



The Ergo Flex Phone Arm offers signficant flexibility by providing an extendable raised platform for your phone which raises your phone up to 16" (40 cm) above the desk (suitable for sit/stand applications). The arm extends 24" (61 cm) and rotates 36 ...



The Ergo Flex Phone Arm offers signficant flexibility by providing an extendable raised platform for your phone which raises your phone up to 16" (40 cm) above the desk (suitable for sit/stand applications). The arm extends 24" (61 cm) and rotates 360°, the platform tilts up to 60° for easy access to your telephone. The platform is 8" x 9.5" (20 cm x 24 cm) and the adjustable spring clip (5" - 9") will fit most phones. There is built-in phone cord management, and the unit can be mounted using a desk clamp.






Models
Model #DescriptionPriceIn Stock?Buy Now
TA002BBlack model SPECIAL ORDER ONLY. MOQ 30 ONCE CURRENT STOCK IS EXHAUSTED$75.00No
TA002WWhite Model SPECIAL ORDER ONLY. MOQ 30 ONCE CURRENT STOCK IS EXHAUSTED$82.50Yes





Swivel CPU Holder

by KV Waterloo



This CPU holder is storable (can slide 12" back on a 17" durable ball-bearing track) and also is equipped with a 360° swivel, making cable maintenance simple. It is available in a standard model (7356D) and also a Lockable (7366D) model. The lockable ...



This CPU holder is storable (can slide 12" back on a 17" durable ball-bearing track) and also is equipped with a 360° swivel, making cable maintenance simple. It is available in a standard model (7356D) and also a Lockable (7366D) model. The lockable model has a chrome bar to prevent the case from sliding front to back in addition to the rubber grips on the sides of the holder which are on both models.






Models
Model #DescriptionPriceIn Stock?Buy Now
7356DBall-bearing, storable$150.00Yes
7366DBall-bearing, storable, lockable$200.00Yes





Under Desk Mouse Tray

by Aidata



The Under Desk Mouse Tray from Aidata is a convenient storable mousing surface which can be attached to most desk or table surfaces. The mousing surface sits about 2.2" below the top surface of the desk and at approximately 7.5" in diameter is able t ...



The Under Desk Mouse Tray from Aidata is a convenient storable mousing surface which can be attached to most desk or table surfaces. The mousing surface sits about 2.2" below the top surface of the desk and at approximately 7.5" in diameter is able to accommodate most conventional mice. The pivoting design enables users to "bring" the mouse out from the desk towards themselves, reducing the need to maintain a forward reach or stretch to access the mouse. This mouse tray can also be of benefit to users who have very limited space for their keyboard by providing an alternate location for the mouse. *For more details on this see the Usage Tips Section on the Detailed Specifications page.






Models
Model #DescriptionPriceIn Stock?Buy Now
UM003BUnder Desk Mouse Tray, Black$12.50Yes
UM003WUnder Desk Mouse Tray, White SPECIAL ORDER ONLY. MOQ 20 ONCE CURRENT STOCK IS EXHAUSTED$12.50Yes





1 2 3 4 >


About Us Services Manufacturers Legal Notices Privacy